
Step 1.
Insert the three connectors to their sockets at rear of the camera:
• The DVI connector to the DVI socket.
• The 8-pin connector to the Ctrl Camera IN socket.
• The power connector to the DC IN 12V socket.
Step 2.
Attach the two connectors to the camera sockets
at the rear of the XT endpoint:
• The HDMI connector to the vertical socket
• The connector for power and serial control to the horizontal socket.
Step 3.
Please ensure that HD1 camera is enabled in the menu Configure > Advanced >
I/O connections > Camera > HD1
Connecting the XT Flex Camera to the XT
Use the supplied cable to connect the Flex Camera to XT Series endpoint.
Attach the three connectors to the camera, and use the other end to attach to the codec.
DC IN 12V IN RS-232C OUT DVI
IR SELECT
1 2 3
SYSTEM
SELECT
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
DC IN 12V IN RS-232C OUT DVI
IR SELECT
1 2 3
SYSTEM
SELECT
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
CAUTION: Make sure all units are
switched off whenever connecting
or disconnecting devices.
Setting Up this Device
Connect the cables as detailed in the steps below to complete the
setup of the Avaya Scopia XT Flex Camera. For details on how to use
the system after setup, see the User Guide for Avaya Scopia XT Series.
Scopia XT Flex Camera is suitable for all XT Series (XT4000 Series,
XT5000 Series, XT7000 Series, and XT Executive 240). Scopia XT Flex
Camera can be used only as first camera, and not cascaded to other XT
Camera models.
© 2000-2016 Avaya Inc. All intellectual property rights in this publication are owned by Avaya Inc. and are protected by United States copyright laws, other applicable
copyright laws and international treaty provisions. Avaya Inc. retains all rights not expressly granted.All product and company names herein may be trademarks of
their registered owners. This publication is Avaya Inc. Confidential & Proprietary. Use pursuant to your signed agreement or Avaya policy. No part of this publication
may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Avaya Inc. No representation of warranties for
fitness for any purpose other than what is specifically mentioned in this guide is made either by Avaya Inc. or its agents. Avaya Inc. reserves the right to revise this
publication and make changes without obligation to notify any person of such revisions or changes. Avaya Inc may make improvements or changes in the product(s)
and/or the program(s) described in this documentation at any time. If there is any software on removable media described in this publication, it is furnished under
a license agreement included with the product as a separate document. If you are unable to locate a copy, please contact Avaya Inc and a copy will be provided
to you. Unless otherwise indicated, Avaya registered trademarks are registered in the United States and other territories. All registered trademarks recognized.
For further information contact Avaya or your local distributor or reseller.
Quick Setup Guide for Avaya Scopia® XT Flex Camera 2016
http://www.avaya.com