AVCOMM AP224 User manual

Quick Installation Guide
Industrial Compact
LTE/ WLAN Router
AP224
The LTE, WLAN router AP224-WLAN+LTE and Wireless LAN
AP AP224-WLAN are designed for industrial and smart city
applications. The AP224 router supports LTE to WLAN
redundancy and LTE/WLAN auto offload to guarantee
continuous connections. To safeguard cybersecurity,
security features such as Firewall, OpenVPN, GRE tunnel
are supported. The embedded MQTT and RESTful API
enables instant public cloud integration such as AWS or
Azure.
・Overview
Model Name Description
AP224-WLAN-
LTE
Industrial Wireless IIoT Field Routing
Gateway,4FE, 802.11b/g/n WLAN, LTE-E,
2SIM( without antenna)，4-port 10/100M
RJ45，1 WLAN+3 LAN/4 LAN, Redundant
2×SIM
AP224-WLAN
Industrial Wireless IIoT Field Routing
Gateway,4FE, 802.11b/g/n WLAN(without
antenna)，4-port 10/100M RJ45，
1 WLAN+3
LAN/4 LAN, Redundant 2×SIM
*LTE-AU/LTE-U/LTE-CN or other region by
request
*GPS support by request
*Also apply to AP224
www.avcomm.us
AVCOMM Technologies, Inc
•1 x ProductUnit
•1 x 2-pin RemovableTerminalConnector
•2 x LTE Antenna,Black + 2 x WiFi Antenna,White(by model)
•1 x DIN rail kit
•1 x Quick InstallationGuide
OptionalAccessory (for detailedinformationpleaserefer to the
Datasheet)
・Package Checklist
・Installation
SIM Card Slot
Warning: Be carefulwhen install
the SIM Card, wrong installation
procedurewillcausedamage.
Make surethe SIM Card is
facing the correct position. SIM 1
SIM 2
DIN Rail mount
For the DIN Rail mount, attach the DIN Rail Clip (DK-D2-2) to the two wall
mountplates.
Wall mount
Two wall mounting plates are installed
at the left and right side of the switch.
Use the two hook holes at the corners
of each wall mounting plate or the
middle hole to hang the switch on the
wall them then screw tightly.
WallMount Clip
No support negative power structure install
Warning:If powerpositiveconnects with deviceground,it will
short the power system and damagethe device..
Grounding Screw
The groundingscrew is located on the bottom side
of the router. For avoidingsystem damageby noise
or electric shock, establish a direct connection
between the groundscrew and the grounding
surfaceprior to connectingdevices.
Grounding Screw
・Appearance
Wiringthe Power Input (9~30V)
1)Insert the positiveand negative wires into the V+
andV- contact on the terminalblockconnector.
2) Tighten screws when the wire is connected.
3)Connectthe power wires to suitableDC Switching
type power supply.
V+ V-
Top Panel
2
3
41
ANT 1
Power
Connector
Reset
Button ANT 4ANT 3
BottomPanel
Grounding
Screw
SIM Card slot
Wall Mounting
Clip (Both Sides)
EthernetNetwork
・4-port10/100MRJ45
・1 WAN+ 3 LAN, or 4
LAN
AP224
SystemLED
・1 x Power
・1 x SystemStatus
・2x RadioStatus
LED(Ra/Rb)
GroundingScrew
IntegratedPowerConnector
・1x 2-pinterminalblockfor
9~30Vpowerinput SIM Card
・2xSIM forredundancy
ANT 1
ANT 2
ANT 3
4 x SMA Antenna Socket
ANT 4
Address: 333 West Loop North, Suite 460 Houston, TX 77024,United States

・Safety Precautions
➢Turn off DC power input source before connecting the DC Power
supply module to the terminal block connectors. Do not turn-on the
source of DC power module and make sure all connections were well
established, then power on the DC source to powering the device.
➢Do make sure that models connect to the corresponding supply
voltage. The device is to be supplied by Limited Power Supply.
➢The router is designed for Industrial IoT, ITS, wayside surveillance
application.
➢Never install or work on/with the equipment or the cabling during the
period of its lightning activity.
AVCOMM reserves the right to make changes to this QIG or to the
product hardware at any time without notice. It is the user’s
responsibility to determine whether there have been any such
updates or amendments herein.
Defects, malfunctions, or failures of the warranted Product(s) caused
by damage resulting from unforeseeable incidents (such as lightings,
floods, fire, etc.), environmental and atmospheric disturbances, other
external forces such as power line disturbances and surge, host
computer malfunction and virus, incorrect power input, or incorrect
cabling, incorrect grounding and damages caused by misuse, abuse
and unauthorized alteration or repair are not warranted.
・Disclaimer
・Support
At AVCOMM, you can use the online service forms to request the
support. The submitted forms are stored in server for AVCOMM
team member to assign tasks and monitor the status of your
service. Please feel free to write to [e-mail] if you
encounter any problems.
・Warranty
5-year Global warranties are available for AVCOMM products
assuring our customers that the products shall remain free from
defects in workmanship or materials and conform in all material
respects to AVCOMM specifications, or Purchaser’s supplied and
accepted specifications. The warranty is limited to the repair and/or
replacement, at AVCOMM’sole discretion, of the defective product
during its warranty period. The customer must obtain a Return
Merchandise Authorization (RMA) approval code prior to returning
the defective Product to AVCOMM for service. The customer agrees
to prepay shipping charges, to use the original shipping container or
equivalent, and to ensure the Product or assume the risk of loss or
damage in transit. Repaired or replaced products are warranted for
ninety (90) days from the date of repair or replacement, or for the
remainder of the original product's warranty period, whichever is
longer.
This device supports both in-band and out-of-band network management.
The user can either configure the device through the user-friendly
Web/HTTPS management or remotely manage the device through the
network Telnet/SSH.
1. Preparation for Web management: First, verify that device is properly
installed in the network and that every PC of this network can access
the router through the web browser (Google Chrome, Internet
Explorer, Mozilla Firefox).
•Type http://IP_address in your browser (the default IP address is
http://192.168.10.1/)
•Key in the username and password in login screen. The default
username and password is admin.
•After you click Login, a page that request to change the password will
appear. Then you can enter the new password. Click Submit to apply
the changes. After you change the password, the welcome page of
the web-based management interface will appear.
•On the left side you can see the list of software features, on the right
side–availablesettings.
◆To link with the device, please make sure that the IP Address of the
PC is located in the same subnet (192.168.10.x).
2. Preparation for Telnet/SSH management: You can connect to the
device by Telnet and the command lines. Below are the steps to open
Telnet connection to the router.
•Start -> Open Command prompt ->Enter
•Type the Telnet 192.168.10.1 (or the IP address of the router). And
then press Enter.
SSH (SecureShell)
The device also supports SSH console. You can remotely connect to the
router to access command line interface. The SSH connection can secure
all the configurationcommandsyou sent to the switch.
SSH is a client/server architecture while the Router is the SSH server.
When you want to make SSH connection with the switch, you should
downloadthe SSH client tool first.
SSH Client
There are many free, sharewares, trials or charged SSH clients you can
find on the internet.
・Management
AP224-WLAN-LTE
ANT 1WIFI 1
ANT 2LTE-Main
ANT 3WIFI 2
ANT 4LTE-Diversity
・Antenna
The device supports up to 4 antennas sockets. he device supports up to 4
antennas sockets. AVCOMM provides the optional accessories, where
the antenna color is black for the LTE and white is for the WIFI.
Radio Status
Ra 4G/NBIoTConnection:Green On
2/3G connection: GreenBlinking
Disconnected:Off
Rb
AP mode:GreenOn
Stationmode connected:Green Blinking
Stationmode/radiodisable:Off
Radio LED
LED Status Description
PWR Green On DC-INPoweris On
Off No Power in DC-IN
System LED
Green On Ready
GreenBlinking FirmwareUpdating
Off NotReady
Ethernet Port
LED (Port 1~4)
Green On Linksestablished
GreenBlinking Packets
transmitting/receiving
Green Off Linkis inactive
・LED Indication
PWR
SYS
Ra
Rb
ANT 2
◆For further feature configurations, please refer to User Manual.
www.avcomm.us
AVCOMM™