AVE HEX-FLAT6 User manual

HEX-FLAT6
User Manual

Table of Contents
Safety .......................................................................................2
Important Safety Instructions...........................................................3
Precautions......................................................................................4
Suspension......................................................................................4
Description................................................................................5
Features ............................................................................ 5
Setup ........................................................................................6
Power Linking ..................................................................... 6
Mounting ............................................................................ 6
Operation ........................................................................... 7
Menu Map .......................................................................... 7
DMX Channel...................................................................... 8
Specifications............................................................................8

Safety
Important Safety Information
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OVEREXPOSE THIS FIXTURE
TO RAIN OR MOISTURE.
WARNING: CONNECT ONLY TO MAINS POWER SUPPLY WITH A PROTECTIVE EARTHING
CONNECTION.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE REAR COVER OR
ATTEMPT TO OPEN THE LIGHTING FIXTURE. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
1. Read this manual carefully.
2. Keep this manual safe for future reference.
3. Follow all warnings and recommendations.
4. Do not operate or store near water.
5. Do not expose the fixture to dripping or splashing liquid, and ensure that no objects
containing liquid are placed on this fixture.
6. Clean only with a dry cloth.
7. Do not install or operate near any heat sources such as radiators, gas heaters, stoves, or
other heating apparatus.
8. Only use attachments and accessories specified by the manufacturer.
9. Do not block any ventilation openings, including sound ports.
10. Install in accordance with the manufacturer’s instructions.
11. Do not obstruct or remove the ground plug from the fixture, doing so may cause electric
shock resulting in serious injury or death.
12. Protect the power cord from being walked on, pinched, or rolled over.
13. Unplug the fixture during electrical storms and power outages.
14. Refer all servicing to a qualified service technician. Servicing is required when the fixture no
longer operates, fails to power on, or emits an electrical smell or sound.
15. To completely disconnect AC power from this fixture, the power supply cord must be
unplugged.

Precautions
If an AVE lighting fixture is used outdoors on a sunny day, ensure that it is in a shaded area and is
well ventilated to help prevent overheating.
Do not use AVE lighting fixtures in environments that are below 0°C OR exceed +40°C.
Suspension
Suspending any object is potentially dangerous and should only be attempted by qualified
individuals with thorough knowledge of the techniques and regulations for suspending objects. It is
the responsibility of the installer to ensure all fixtures and effects are installed correctly. AVE
strongly recommends inspecting installed systems every 6 months for signs of weakness or damage.
If any damage or weakness is detected then remedial action should be taken immediately. The user
is responsible for making sure the wall, ceiling, or structure is capable of supporting all objects
suspended overhead. Any hardware used to suspend the fixture not associated with AVE is the
responsibility of others.

Description
The AVE Hex-Flat 6 is a lightweight and high-output LED par can that is designed to give you the
flexibility and performance your event or stage needs. Featuring 6x 12W LED diodes each with Hex-
colour technology (RGBAW+UV) allowing you to mix any colour you could need. The par is built into
a light ABS plastic housing with thermal fan to keep the fixture cool. Also fitted is a dual yoke for
safely hanging the fixture from stands or lighting truss, or mounting on the floor.
The Hex-Flat 6 is supplied out of the box with ‘Auto’ programs including a ‘sound active’ mode for
plug-and-play operation with an amazing visual effect. The Hex-Flat 6 can also be controlled via DMX
for integration into larger lighting shows and setups with the 3-pin XLR connectors.
The Hex-Flat has the ability (when used in DMX) to default to an auto setting when the DMX signal is
no longer detected. When the DMX resumes the fixture returns to the DMX setting. This is useful for
dance floors, and event venues that want to avoid unexpected blackouts due to signal loss or
controller issues.
Features
•High-output 6x 12W LEDs
•Hex Colour diodes (RGBAW+UV) for great colour spectrum mixing
•Lightweight ABS housing
•3-Pin XLR connections for DMX control
•Built-in Auto programs; Fade / Flash / Sound
•Static colour settings
•Master / Slave operation
•Fitted with a Dual Yoke

Setup
To set up your AVE Hex-Flat 6 follow the below steps;
1. Mount the item on your lighting stand or on the floor
2. Connect the AC power cord from a grounded mains 240v power source.
3. Power the fixture/s on from the mains socket
4. Select the desired operation mode and press enter
Power Linking
The Hex-Flat is fitted with a Mains IEC input and output that allows you to power multiple fixtures
from one (1) mains power connection.
To power link your fixtures;
1. Ensure the mains power is off and unplugged from the wall
2. Connect your IEC extension cable to the output connector from the first fixture and connect
to the power input of the second unit ensuring that the connector are firmly in place
3. Repeat step 2 for each additional fixture up to 7 fixtures
Mounting
The Hex-Flat 6 is fitted with a Dual yoke that can be separated and used as a floor stand for use on
flat & sturdy surfaces.
For hanging the fixture to a lighting stand or trussing, simply attach a lighting clamp to the outer
yoke, ensuring that the clamp is tightened to prevent unwanted movement.
Next, attach a safety wire* through the eyelets located on the rear panel of the fixture. Secure the
safety cable to the stand or trussing.
*This is a secondary fall arrest; in the event the yoke or clamp fail, the fixture is safe from causing
serious injury or damage

Operation
To access the menus and functions of the Hex-Flat 6, use the four (4) buttons located under the main
control screen.
Button Label
Function
Menu
Press to access main menu, or change function once the fixture is on
Up
Cycles upwards through the menu and options
Down
Cycles downwards through the menu and options
Enter
Press to select a menu option or save a setting
Menu Map
Main Level
Program Level
Description
Addr
1 – 512
DMX Address Value
Chnd
6Ch
3 Channel DMX Mode
10Ch
7 Channel DMX Mode
SLnd
nASt
Master
SL1
Slave Mode 1
SL2
Slave Mode2
SL3
Slave Mode3
SL4
Slave Mode4
Shnd
SoUn
Sound Active Mode
FAde
Colour Fade with 8 speed settings
CoLo
Colour Presets 1 – 24 + Strobe speed
Auto
Auto Mode
LED
On/Off
LED backlight Display
dISP
Invert Display
bALA
red
Manual Red Colour 0 - 255
Gree
Manual Green Colour 0 - 255
bLue
Manual Blue Colour 0 - 255
Uhbe
Manual White Colour 0 - 255
bALA
red
Manual Red Colour 0 - 255
Gree
Manual Green Colour 0 - 255
bLue
Manual Blue Colour 0 - 255
Uhbe
Manual White Colour 0 - 255
Anbe
Manual Amber Colour 0 - 255
uU
Manual UV Colour 0 - 255
teSt
-
Test all colours + All on
FhrS
-
Displays hours of operation
rF
On/off
RC control on/off (remote not included)
tenP
-
Displays the fixture temperature

DMX Channels
6 CH Control
1 CH
0 - 255
Red
2 CH
0 - 255
Green
3 CH
0 - 255
Blue
4 CH
0 - 255
White
5 CH
0 - 255
Amber
6 CH
0 - 255
UV
10 CH Control
1 CH
0 - 255
Red
2 CH
0 - 255
Green
3 CH
0 - 255
Blue
4 CH
0 - 255
White
5 CH
0 - 255
Amber
6 CH
0 - 255
UV
7 CH
0 - 255
Dimmer
8 CH
0 – 255
150 - 199
200 – 245
246 – 255
Strobe (slow > fast)
Strobe Effect 1
Strobe Effect 2
Strobe (max speed)
9 CH
0 - 7
No Function
8 - 255
Stepping Colour
10 CH
0 - 7
No Function
8 – 199
Stepping Colour Speed
200 - 255
Sound Active
Specifications
Light Source:
6 x 12W Hex-Colour LED Diodes
Diode Colour:
Red, Green, Blue, White, Amber, UV
Beam Angle:
33°
DMX Channels:
6CH / 10CH
DMX Connectors:
3-Pin XLR
Enclosure:
ABS Plastic
Power Consumption:
160W
Power Supply:
240V AC / 50Hz
Power Connectors:
IEC Mains
Dimensions:
191 x 208 x 75 mm
Weight:
1.0 kg