AVE quad-flat User manual

AVE QUAD
10mm x 186
AVE QUAD
-
FLAT
10mm x 186
(RGBW) LED PARCAN
User Ma ual
FLAT
(RGBW) LED PARCAN

WARNING
•Read the instruction manual thoroughly prior to using the unit.
•Keep this manual for future reference.
•Keep the packaging so that the unit can be shipped in the original packaging in order to
avoid damage.
•Make sure that there is sufficient cooling in the mounting area.
•Never plug or unplug the unit with wet hands.
•If the plug and/or mains lead are damaged, they need to be repaired by a qualified
technician.
•If the unit is damaged to an extent that you can see internal parts, do not plug the unit into
a mains outlet.
•Keep away from heat and direct sunlight. Make sure that neither liquids, nor small objects
can enter the unit through the ventilation holes.
•Only clean the unit with a damp, dust free cloth. Do not use cleaners or solvents!
•Do not use contact spray or cleaning agent to clean the switches and buttons.
•Repairs have to be carried out by a qualified technician only.
•Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
•Always unplug the unit during an electrical storm or when it is not in use.
•When you unplug the unit from the mains always pull the plug, never the lead.
•The unit does not contain any user replaceable parts other than those specified in this
manual.
•Keep out of the reach of children.
IMPORTANT
Do not attempt to open the unit or make any repairs / modifications yourself. This voids your warranty. Failure to
maintain and service the machine as instructed above may void your warranty. The warranty is not applicable in
case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this
manual. AVE cannot be held responsible for property damage or personal injuries caused by disregarding the
safety recommendations and warnings.

Safety Recommendations:
Always connect the Quad-Flat to a wall outlet or an earthed mains lead!
Do not obstruct the openings on the housing in order to ensure proper cooling. Do not place any
objects on the LED parcan.
Installation and use:
1. Unpack the unit. Ensuring all packaging is removed from the machine
2. Attach the included double yoke / bracket with the supplied screws
3. Connect to mains power and turn power on.
4. Set the light to the desired mode / program
Menu Guide:
R001 D512 DMX Addressing 0 - 512
R000 R255 Manual Red 0 - 255
G000 G255 Manual Green 0 - 255
B000 B255 Manual Blue 0 - 255
H000 H255 Manual White 0 - 255
1E-- 1E00 - 1E20 Single Colour Strobe (slow ~ fast)
2E-- 2E00 - 2E20 All Colour Strobe (slow ~ fast)
1F00 1F00 - 1F20 Red 0 - 100%
2F00 2F00 - 2F20 Green 0 - 100%
3F00 3F00 - 3F20 Blue 0 - 100%
4F00 4F00 - 4F20 White 0 - 100%
5F00 5F00 - 5F20 Red / White 0 - 100%
6F00 6F00 - 6F20 Blue / Green / White 0 - 100%
7F00 7F00 - 7F20 Red / Green / Blue / White 0 -100%
1J00 1J00 - 1J20 Colour Fade (slow ~ fast)
2J00 2J00 - 2J20 Colour Pulse (slow ~ fast)
1U00 Sound Mode 1
2U00 Sound Mode 2
3U00 Sound Mode 3
4U00 Sound Mode 4
rent Slave Mode
Pro Tip;
For manual colour mixing use R000, B000, G000, & H000
Purple = R255, B255, G000, H000
Yellow = R255, B20, G255, H000
Pink = R255, B160, G20, H000

DMX Values and Functions:
Channel
Value
Function
1 0 - 255 Manual Red 0-100%
2 0 - 255 Manual Green 0 - 100%
3 0 - 255 Manual Blue 0 - 100%
4 0 - 255 Manual White 0 - 100%
5 0 - 14 No Function
15 - 44 Strobe (CH 8 Speed Control)
45 - 255 No Function
6 0 - 209 No Function
210 - 223 Red Preset
224 - 255 Green Preset
7 1 - 19 Blue Preset
20 - 39 White Preset
40 - 59 White / Red Preset
60 - 79 Blue / Green / White Preset
80 - 99 Colour Fade (CH 8 Speed Control)
100 - 119 Colour Pulse (CH 8 Speed Control)
120 - 139 Red / Green / Blue / White (Full on)
140 - 159 Multi-Colour Chase (CH 8 Speed Control)
160 - 179 Single Colour Chase (CH 8 Speed Control)
180 - 199 No Function
200 - 255 Sound Mode
8 0 -255 Auto Mode Speed Control
Specifications:
LED Colour Red, Green, Blue, White
No. of LEDs 186 x 10mm
DMX Channels 8
DMX Protocol 512
DMX Connectors 3-Pin XLR
Power Supply 85 - 265V AC, 50/60Hz
Power Consumption 20W
Dimensions 230 x 80 x 240mm
Weight 1 kg