AVE TRI FLAT User manual

TRI FLAT
User Manual

Table of Contents
Safety .......................................................................................2
Important Safety Instructions...........................................................3
Precautions......................................................................................4
Suspension......................................................................................4
Description................................................................................5
Features ............................................................................5
Setup........................................................................................6
Power Linking .....................................................................6
Mounting............................................................................6
Operation...........................................................................7
Menu Map..........................................................................7
DMX Channel......................................................................8
Specifications............................................................................8

Safety
Important Safety Information
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OVEREXPOSE THIS FIXTURE
TO RAIN OR MOISTURE.
WARNING: CONNECT ONLY TO MAINS POWER SUPPLY WITH A PROTECTIVE EARTHING
CONNECTION.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE REAR COVER OR
ATTEMPT TO OPEN THE LIGHTING FIXTURE. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
1. Read this manual carefully.
2. Keep this manual safe for future reference.
3. Follow all warnings and recommendations.
4. Do not operate or store near water.
5. Do not expose the fixture to dripping or splashing liquid, and ensure that no objects
containing liquid are placed on this fixture.
6. Clean only with a dry cloth.
7. Do not install or operate near any heat sources such as radiators, gas heaters, stoves, or
other heating apparatus.
8. Only use attachments and accessories specified by the manufacturer.
9. Do not block any ventilation openings, including sound ports.
10. Install in accordance with the manufacturer’s instructions.
11. Do not obstruct or remove the ground plug from the fixture, doing so may cause electric
shock resulting in serious injury or death.
12. Protect the power cord from being walked on, pinched, or rolled over.
13. Unplug the fixture during electrical storms and power outages.
14. Refer all servicing to a qualified service technician. Servicing is required when the fixture no
longer operates, fails to power on, or emits an electrical smell or sound.
15. To completely disconnect AC power from this fixture, the power supply cord must be
unplugged.

Precautions
If an AVE lighting fixture is used outdoors on a sunny day, ensure that it is in a shaded area and is
well ventilated to help prevent overheating.
Do not use AVE lighting fixtures in environments that are below 0°C OR exceed +40°C.
Suspension
Suspending any object is potentially dangerous and should only be attempted by qualified
individuals with thorough knowledge of the techniques and regulations for suspending objects. It is
the responsibility of the installer to ensure all fixtures and effects are installed correctly. AVE
strongly recommends inspecting installed systems every 6 months for signs of weakness or damage.
If any damage or weakness is detected then remedial action should be taken immediately. The user
is responsible for making sure the wall, ceiling, or structure is capable of supporting all objects
suspended overhead. Any hardware used to suspend the fixture not associated with AVE is the
responsibility of others.

Description
The AVE Tri Flat is a lightweight and high-output LED par can that is designed to give you the
flexibility and performance your event or stage needs. Featuring 18x 3W LED diodes each with Tri-
colour technology (RGB) allowing you to mix a huge colour spectrum. The par is built into a light ABS
plastic housing with thermal fan to keep the fixture cool. Also fitted is a dual yoke for safely hanging
the fixture from stands or lighting truss, or mounting on the floor.
The Tri Flat is supplied out of the box with ‘Auto’ programs including a ‘sound active’ mode for plug-
and-play operation with an amazing visual effect. The Tri Flat can also be controlled via DMX for
integration into larger lighting shows and setups with the 3-pin XLR connectors.
Features
High-output 18x 3W LEDs
Tri Colour diodes (RGB) for great colour spectrum mixing
Lightweight ABS housing
3-Pin XLR connections for DMX control
Built-in Auto programs; Fade / Flash / Sound
Static colour settings
Master / Slave operation
Fitted with a Dual Yoke

Setup
To set up your AVE Tri Flat follow the below steps;
1. Mount the item on your lighting stand or on the floor
2. Connect the AC power cord from a grounded mains 240v power source.
3. Power the fixture/s on from the mains socket
4. Select the desired operation mode and press enter
Power Linking
The Tri is fitted with a Mains IEC input and output that allows you to power multiple fixtures from
one (1) mains power connection.
To power link your fixtures;
1. Ensure the mains power is off and unplugged from the wall
2. Connect your IEC extension cable to the output connector from the first fixture and connect
to the power input of the second unit ensuring that the connector are firmly in place
3. Repeat step 2 for each additional fixture up to 7 fixtures
Mounting
The Tri Flat is fitted with a Dual yoke that can be separated and used as a floor stand for use on flat
& sturdy surfaces.
For hanging the fixture to a lighting stand or trussing, simply attach a lighting clamp to the outer
yoke, ensuring that the clamp is tightened to prevent unwanted movement.
Next, attach a safety wire* through the eyelets located on the rear panel of the fixture. Secure the
safety cable to the stand or trussing.
*This is a secondary fall arrest; in the event the yoke or clamp fail, the fixture is safe from causing
serious injury or damage

Operation
To access the menus and functions of the Tri Flat, use the four (4) buttons located under the main
control screen.
Button Label
Function
Menu
Press to access main menu, or change function once the fixture is on
Up
Cycles upwards through the menu and options
Down
Cycles downwards through the menu and options
Enter
Press to select a menu option or save a setting
Menu Map
Main Level
Program Level
Description
Addr
1 –512
DMX Address Value
Chnd
3Ch
3 Channel DMX Mode
7Ch
7 Channel DMX Mode
SLnd
nASt
Master
SL1
Slave Mode 1
SL2
Slave Mode2
SL3
Slave Mode3
SL4
Slave Mode4
Shnd
SoUn
Sound Active Mode
Colo
Colour Presets 1 –24
+ Strobe speed
StCo
Static Colours
FAdE
Colour Fade SP1 - SP8 (speed)
LED
On/Off
LED backlight Display
dISP
Invert Display
Nanu
red
Manual Red Colour 0 - 255
Gree
Manual Green Colour 0 - 255
bLue
Manual Blue Colour 0 - 255
Uhbe
Manual White Colour 0 - 255
teSt
Test all colours + All on
FhrS
Displays hours of operation

DMX Channels
3 CH Control
1 CH
Red
2 CH
Green
3 CH
Blue
7 CH Control
1 CH
0 - 255
Red
2 CH
0 - 255
Green
3 CH
0 - 255
Blue
4 CH
0 - 255
Dimmer
5 CH
0 - 255
Strobe (slow > fast)
6 CH
0 - 7
No Function
8 - 255
Stepping Colour
7 CH
0 - 7
No Function
8 –199
Auto Colour (slow > fast)
200 - 255
Sound Active
Specifications
Light Source:
18 x 3W Tri-Colour LED Diodes
Diode Colour:
Red, Green, Blue
Beam Angle:
26°
DMX Channels:
3CH / 7CH
DMX Connectors:
3-Pin XLR
Enclosure:
ABS Plastic
Power Consumption:
60W
Power Supply:
240V AC / 50Hz
Power Connectors:
IEC Mains
Dimensions:
240 x 235 x 80 mm
Weight:
1.0 kg