Avenview FO-HDMI-1000M-EMI User manual

www.avenview.com
1
HDMI Extender SET over Single Fiber
Optic Cable with EMI Shielding
Model #: FO-HDMI-1000M-EMI
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

www.avenview.com
2
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 4
1.7 Installation ............................................................................................................................. 5
Section 2: Specifications......................................................................................................................... 6
2.1 Case Dimensions .......................................................................................................................... 6
2.2 Absolute Maximum Ratings ......................................................................................................... 7
2.3 Signal Pin Assignment .................................................................................................................. 7
2.4 Optical Fiber Cable ....................................................................................................................... 8

www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview FO-HDMI-1000M-EMI, HDMI Extender SET over Single Fiber Optic, has been tested for
conformance to safety regulations and requirements, and has been certified for international use. However,
like all electronic equipment’s, the FO-HDMI-1000M-EMI should be used with care. Read the following safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-HDMI-1000M-EMI optical HDMI extension module, is designed to let digital flat panel display
extend over 1000 meters away from host based on HDMI standard by optical transmission technology. Its
small package and transmit up to four video and one low-speed lane, while simultaneously receiving one
low-speed signal, all on one multimode fiber.
-High Speed and long distance transmission by 1 channel SC type Multi-mode Fiber
-Supports resolution up to HDTV/1080P, PC/WUXGA(1920x1200)
-Transmit up to 1000m (3300 feet) at 1280 x 1024 by multi-mode SC Type one fiber optic cable
-Transmit up to 500m (1650 feet) at 1920 x 1200 by multi-mode SC Type one fiber optic cable
-TMDS video signal and EDID data is transmitted by 1 channel multimode optical fiber
-HDCP support by DDC channel
-Supports 12Bit Deep Color
-Small size for insertion into internal system
-Optional external power supply (Automatic power switch is included.)
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-FO-HDMI-1000M-EMI Transmitter x 1
-FO-HDMI-1000M-EMI Receiver x 1
-User’s Manual x 1
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com
5
1.7 Installation
Avenview FO-HDMI-1000M-EMI is composed of a Transmitter converting the graphic signal of a computer to
optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor
converted from the optical signal to electrical signal. The Transmitter should be connected to computer and
the Receiver should be connected to a monitor.
Avenview FO-HDMI-1000M-EMI is designed to self-detect the resolution of the monitor and change the
resolution accordingly. Follow these steps for connecting to a device:
To setup Avenview FO-HDMI-1000M-EMI follow these steps for connecting to a device:
1. Power on your display
2. Connect Transmitter to the PC and Receiver to the Display.
3. Connect the optical fiber between Transmitter and Receiver.
4. Restart the computer.
Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a
computer uses power from the computer.
Do not twist or pull by force the both ends of the optical cable. It may cause malfunction

www.avenview.com
6
Section 2: Specifications
Item
Description
Units
FO-HDMI-1000M-EMI (Transmitter)
FO-HDMI-1000M-EMI (Receiver
Unit Description
HDMI Transmitter over Fiber Optic
HDMI Receiver over Fiber
HDMI Compliance
HDMI 1.3a
HDCP Compliance
HDCP 1.1
Video Bandwidth
2.25 Gbps / Channel
Supported Resolution &
Distance
WUXGA 1920 x 1200 @ 500 meters ( 1650 feet)
UXGA 1600 x 1200 @ 700 meters (2300 feet)
SXGA 1280 x 1024 @ 1000 meters (3300 feet)
Optical Converter
4 Ch 850 nm Transmit OSA
911nm, 1 Ch VCSEL
980nm, 1 Ch PIN P/D Diode
4 Ch 850 nm Transmit OSA
911nm, 1 Ch VCSEL
980nm, 1 Ch PIN P/D Diode
HDMI Connector
HDMI A Type Plug
Optical Connector
1 SC Connector
Fiber Type
50/125 µm Multi-mode glass fiber
Power Consumption
1.0W (max)
0.75W (max)
Power Supply
100 ~ 240V 5V 2A DC
Dimensions (L x W x H)
10.7” x 1.2” x 0.5”
Environmental
Operating Temperature
32˚~ 104˚F (0˚to 40˚C)
Storage Temperature
-4˚~ 140˚F (-20˚~ 60˚C)
Relative Humidity
20~90% RH (no condensation)
2.1 Case Dimensions

www.avenview.com
7
2.2 Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Power Supply
VCC
-0.3
5.5
V
Operating Temperature
VOT
0
50
°C
Storage Temperature
VST
-20
70
°C
Relative Humidity
HRH
10
80
RH
2.3 Signal Pin Assignment
Transmitter / Receiver
Pin
Signal Assignment
Pin
Signal Assignment
1
T.M.D.S. Data2+
11
T.M.D.S Clock Shield
2
T.M.D.S. Data2 Shield
12
T.M.D.S Clock -
3
T.M.D.S. Data2-
13
CEC
4
T.M.D.S. Data1+
14
No Connect
5
T.M.D.S. Data1 Shield
15
SCL
6
T.M.D.S. Data1-
16
DSA
7
T.M.D.S. Data0+
17
DDC/CEC Ground
8
T.M.D.S. Data1 Shield
18
+5V Power
9
T.M.D.S. Data0-
19
Hot Plug Detect
10
T.M.D.S Clock +
Stresses greater than those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operations section
for extended periods of time may affect reliability.

www.avenview.com
8
2.4 Optical Fiber Cable
The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and
Table below:

www.avenview.com
9
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.