Avenview Rackmount Keyboard Drawer RSUN-N17 User manual

www.avenview.com
1
RSUN N Series
User’s Guide
Models
RSUN-N17, RSUN-N19
- With KVM Options
- 1U 17”, 19” Screen Size
- Designed for SUN Solaris
© 2007 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.

www.avenview.com
2
Table of Contents
Section 1 –Getting Started .................................................................................................................... 4
1.1 Important Safegaurds ............................................................................................................ 4
1.2 Safety Instructions ................................................................................................................. 5
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 5
1.4 Package Contents................................................................................................................... 6
1.5 Before Installation.................................................................................................................. 7
1.6 Unpacking .............................................................................................................................. 7
1.7 Optional Accessories.............................................................................................................. 7
1.8 Peripheral Products ............................................................................................................... 8
1.9 Structure Diagram.................................................................................................................. 8
1.10 Installation ............................................................................................................................. 9
1.11 How to Use “N” Series LCD Keyboard Drawer..................................................................... 10
1.12 How to Use the Slides.......................................................................................................... 11
1.13 How to Install “One Man” Installation Slides....................................................................... 12
1.13.1. Package Contents......................................................................................................... 12
1.13.2. Install the Front Mounting Ear x 2 pcs ......................................................................... 12
1.13.3. Install into Rack ............................................................................................................ 13
1.14 Connect to Server via USB Interface.................................................................................... 14
1.15 Connect to KVM via USB Interface ...................................................................................... 14
Section 2: Operations........................................................................................................................... 15
2.1 On-screen Display Operation............................................................................................... 15
2.2 On-screen Menu .................................................................................................................. 16
Section 3: Specifications....................................................................................................................... 18
3.1. Keyboard & Mouse .............................................................................................................. 19
3.2. Keyboard & Mouse .............................................................................................................. 20
Section 4: Optional Specifications........................................................................................................ 21
4.1 KVM Options........................................................................................................................ 21

www.avenview.com
3
4.2 DC Power Option ................................................................................................................. 21
Section 5: Troubleshooting .................................................................................................................. 22
Section 6: Dimensions.......................................................................................................................... 22

www.avenview.com
4
Section 1 –Getting Started
1.1 Important Safegaurds
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.

www.avenview.com
5
1.2 Safety Instructions
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40° C (104° F).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling
and causing damage to other equipment or injury to persons nearby.
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between
it and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the
voltage and current labelled on the equipment’s electrical ratings label. The voltage rating on the
cord should be higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to
prevent being damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on
to the power supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

www.avenview.com
6
1.4 Package Contents
1 LCD Keyboard drawer x 1 pc,
2Fasteners for rear L-bracket x 4 pcs
3330mm rear mounting L-bracket x 1 pair
RSUN-N17, RSUN-N19 mounting depth-adjustable from 320mm to 920mm
4CB-6 2-in-1 USB keyboard cable x 1 pc or
CD-6 3-in-1 PS/2 keyboard cable x 1 pc
5User manual x 1 pc
6Power cord x 1 pc
7Auto Switch power adapter (for external power version ) x 1 pc

www.avenview.com
7
1.5 Before Installation
It is very important to locate the Rackmount Keyboard Drawer in a suitable environment.
The surface for placing and fixing the Rackmount Keyboard Drawer should be stable and level or
mounted into a suitable cabinet.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Convenience for connecting the Rackmount Keyboard Drawer to the related facilities should be well
considers too.
1.6 Unpacking
The LCD Keyboard Drawer comes with the standard parts shown on the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier
immediately.
1.7 Optional Accessories
USB 2-in-1 KVM cable
CB-6 6 feet
CB-10 10 feet
CB-15 15 feet
“One Man” installation Slides
NBK-01 Single or “One Man” installation Slides
*Please refer to page 12 –13 for installation guidelines
Power Cord
IEC power cord
NEMA 5-15 power cord (US)
BS 1363 power cord (UK)
CEE 7/4 power cord (German)
AS 3112 power cord (Australia)

www.avenview.com
8
1.8 Peripheral Products
Item
Description
DB-15 KVM
8 / 16-port USB KVM
Cat5 KVM
16 / 32-port IP Cat5 KVM
16 / 32-port two console Cat5 KVM
16 / 32-port high density Cat5 KVM
KVM Extender
Cat5 USB KVM Extender
1.9 Structure Diagram
1Carry handle to release the 2-pt lock
22-point lock
3LCD interchangeable module kit
4LCD membrane
5Adjustable rear mounting L-bracket
6Micro switch for screen auto power off
7Membrane switch (KVM option)
8Keyboard interchangeable module kit
9Mouse interchangeable module kit

www.avenview.com
9
1.10 Installation
Figure 1
Install each rear L-bracket using two fasteners
shown in Figure 1.
Leave the fasteners slightly loose
Figure 2
Measure the front and rear mounting depth of
the rack.
Align each rear L-bracket to a suitable length
and tighten the fasteners shown in Figure 2.
Figure 3
Fix the LCD keyboard drawer into the rack.
* Hardware (screws and cage nuts) for fixing the
mounting bracket to the rack is not provided.

www.avenview.com
10
1.11 How to Use “N” Series LCD Keyboard Drawer
Figure 4
Gently pull the tab toward the front of the LCD,
shown in Figure 4
Figure 5
Flip up the LCD to a suitable angle, as shown in
Figure 5
Figure 6
Operate the LCD keyboard drawer, as shown in
Figure 6

www.avenview.com
11
1.12 How to Use the Slides
Figure 7
A white arrow release button is located on the
outside of each slide, as shown in Figure 7
Figure 8
Push the white arrow button on either side of
the LCD keyboard drawer to unlock, as shown
in Figure 8. Avoid pressing the red button
located on either side
Figure 9
Hold down the white arrow button until the
LCD keyboard drawer is located in the rack, as
shown in Figure 9

www.avenview.com
12
1.13 How to Install “One Man” Installation Slides
1.13.1. Package Contents
1Mounting bracket x 2 pcs
2Front mounting ear (left & right ) x
2 pcs
3Support bracket x 4 pcs
4M6 cage nut x 8 pcs
5M6 washer x 8 pcs
6M6*15mm screw x 8 pcs
7M3.2*4.5mm screw x 14 pcs
1.13.2. Install the Front Mounting Ear x 2 pcs
Disassemble the standard front mounting ears carefully
Install the optional front mounting ears with M3.2*4.5mm
screw x 8pcs

www.avenview.com
13
1.13.3. Install into Rack
Attach the mounting brackets to vertical
mounting rails.
Leaving the screws slightly loose.
Attach left and right front mounting ears to
vertical rails.
Tighten the screws.
Attach the support brackets to chasis with
M3.2*4.5mm screws x 6 pcs
Installation complete.
Pickup the unit.
Insert inner members of slides into the already
mounted internal slide members in the rack.
Model No. NBK-01

www.avenview.com
14
1.14 Connect to Server via USB Interface
Figure 15:Example of connecting CD-6 2-in-1 USB KVM cable to server via USB Interface
1.15 Connect to KVM via USB Interface
Figure 16: Example of connecting CD-6 2-in-1 USB KVM cable to KVM via USB Interface
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to KVM switch manual.

www.avenview.com
15
Section 2: Operations
2.1 On-screen Display Operation
17" & 19” LCD membrane
Membrane Switch
Function
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
Exit the OSD screen
Shortcut key to auto adjustment by pressing the button for 5 seconds or
Toggle analog, digital & video connection (DVI-D and video options only)

www.avenview.com
16
2.2 On-screen Menu
BRIGHTNESS / CONTRAST
Brightness
Adjust background black level of the screen image.
Contrast
Adjust the difference between the image background (black level) and the foreground
(white level)
AUTO ADJUST
Auto Adjust
Fine tunes the video signal to eliminate waviness and distortion. A “Adjusting” message is
displayed during the process
Auto Tune
Optimize phase, clock, position and size. An “Adjusting” message is displayed during the
process
PHASE / CLOCK
Phase / Clock
To enter into the Phase & Clock sub menu
H / V POSITION
H / V Position
Align the screen image left or right and up or down
MISC
Information
Display the current resolution, refresh rate and frequency information on the screen
OSD Timer
Set the time duration in seconds that the OSD is visible after the last button is pressed. The
factory default is 10 seconds
Color
Select the screen color –5500K, 65000K & 9500K, The factory default is 9500K
Language
Select the language in which the OSD menu is displayed:
English, Chinese (中文), Japanese (日本語), German, French, Spanish, Italian.
RESET
Restore the settings to factory default

www.avenview.com
17
1
Image
Brightness
Adjust background black level of the screen image
Contrast
Adjust the difference between the image
background (black level) and the foreground (white
level)
Sharpness
Adjust the image from weak to sharp
Saturation
Adjust the saturation of the image color
Hue
Adjust the screen hue value
2
Geometry
Auto Config
Adjust automatically sizes, centers, and fine tunes
the video signal to eliminate waviness and
distortion. An “Adjusting” message is displayed
during the process.
H. Position
Align the screen image left or right
V. Position
Align the screen image up or down
Clock
Adjust the clock value
Phase
Adjust the phase value
3
Function
OSD Position
Adjust OSD menu horizontal and vertical position
OSD Zoom
Adjust the difference between the image
background (black level) and the foreground (white
level).
Color Temp
Select the screen color –5500K, 6500K & 9500K.
The factory default is 6500K.
4
System
Language
Select the language in which the OSD menu is
display. English, Chinese (中文), Japanese (日本語),
German, French, Spanish, Italian
Time
Function is not supported
Power Off
Function is not supported
Reset
Reset all settings to factory default.

www.avenview.com
18
Section 3: Specifications
Item
Description
Form Factor
1U rack mounting on slide-out rails
LCD Manufacturer
Diagonal Size
17" TFT
19” TFT
Max. Resolution
1152 x 900 (Direct)
1280 x 1024 (Native)
Brightness (cd/m²)
300
Color Support
16.2 Mil.
Contrast Ratio (typ.)
700:1
1000:1
Viewing Angle (H/V)
150˚ x 135˚
Display Area (mm)
337 x 270
376 x 301
Tr Response Time (ms)
2
VGA Signal Input
Analog RGB, 0.7Vp-p
Sync. Type
Separate H/V, Composite, SOG
Resolution
640 x 350, 70 Hz
720 x 400, 70 Hz
640 x 480, 60/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 72/ 75 Hz
1152 x 864, 60/ 70/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
Plug & Play DDC
EDID 1.3
Console Port (Combo)
3-in-1 DB-15 connector for VGA / keyboard /mouse
Support USB & PS/2 servers or KVM Switches
Power Input
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Max. 40 Watt, Standby 5 Watt
Compatibility
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval
FCC, CE
Options
KVM Integration
Cat5 & DB-15 KVM with IP console and 2-console selection
Keyboard & mouse
Full size keyboard built-in touch-pad / trackball
Graphic Input
DVI-D, BNC, S-Video & RCA video input
DC Power
DC power input with 12V, 24V, 48V selection
Touchscreen
Resistive and capacitive type touchscreen selection
Environmental
Operation
0˚to 50˚C Degree
Storage
-5˚ to 65˚C Degree
Relative Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random vibration

www.avenview.com
19
3.1. Keyboard & Mouse
NS Keyboard integrated with Touchpad
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 Key notepad keyboard with full numerical pad and SUN function
US layout only
USB interface
NS Keyboard integrated with Trackball
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 Key notepad keyboard with full numerical pad and SUN function
US layout only
USB interface
Supporting layouts

www.avenview.com
20
3.2. Keyboard & Mouse
SUN-compatible keyboard incorporates SUN short-cut keys.
Press the Fn/Num button to switch the color of the
NUM LED.
Num LED in Off Mode
Keypad behaves as a SUN Solaris system
administration command mode.
Num LED in Green Color
Keypad behaves as normal keypad mode
Three Audio / Display keys are located in the upper-right corner of the NS keyboard:
Audio : Mute, decrease in volume and increase in volume.
Display : Degauss, decrease contrast and increase contrast.
Please ask your supplier for full details