Crystal Image Technologies RM-FD117A User manual

- 1 -
LCD Drawer User Manual
RM-FD117A

- 2 -
This manual, covering various aspects of the equipment such as installation, setup and
cascade, will help you make full use of this LCD Drawer. Please read this manual carefully
and install and operate the equipment according to the manual to avoid damage to this
product its accessories.
Product package includes following items:
1 * 17.3 inch LCD KVM Drawer;
1 * AC Power Cord
1 * Rack installation bracket ( one pair )
1 * USER’S manual (CD)
1 * 1.8 Meter VGA cable
1 * 1.8 Meter DVI cable
1 *1.8 Meter USB A Type cable
1 *1.8 Meter Audio cable
1 *1.8 Meter HDMI cable (option)
Please check items above. If any item is missing or damaged, please contact us at
800-542-2489 / [email protected]

- 3 -
Table of Contents
1 Introduction …………………………………………………………………………-4-
1.1Overview…………………………………………………………………...….
-4-
1.2 Functions & Features…………………………………… ……………...…..-4-
1.3 Hardware Requirement……………………………………………..….……-4-
1.3.1 Host Requirement………………………………………………....… -4-
1.3.2 Cables…………………………………………………………...….… -4-
1.4 Product Specifications………………………………………………..….…..-5-
1.5 LCD Specifications………………………………………………….…..……-5-
1.6 Front View………………………………………………………….…..……. -6-
1.7 Rear View……………………………………………………………..….…...-7-
2 Installation……………………………………………………………………...……-8-
2.1 Rack Installation……………………………………………………………… -8-
2.2 Standard Installation……………….………………………………….…… -9-
2.3 LCD KVM Console and KVM Cascade Installation…………… …….…. -10-
2.4 LCD OSD Menu Setup………………………………………………..….… -11-
3 Certificates………………………………………………………………..….….… -12-

- 4 -
1 Introduction
1.1 Overview
RM-DF117A LCD drawer integrates keyboard, LCD display and touch pad in a drawer type
worktable and provides a convenient space-saving operation mode. The cover is an LCD
display,while the base is keyboard and touchpad.
RM-DF117A console is a control device integrating 17.3” LCD, 104 keys keyboard and
touchpad mouse. Flexible dual rail design, capable LCD screen and keyboard tray
operated independently.
LCD console is the best choice to save time and efforts. Since all hosts can be
controlled from a single main control terminal, using the LCD Console:(1)avoids the
cost of keyboard, mouse and monitor of each host; (2) saves work space; (3) saves
power; (4) saves the trouble of moving from one computer to another.
* For Mac and Sun hosts, USB cable must be used for connection.
1.2 Function & Features
RM-DF117A is integrated to a drawer type worktable of 1U height to facilitate rack
installation. Supported resolution up to 1920 x 1200 , 75Hz. It meets the 1U height of
rack specifications and can be installed into 19 inch rack cabinet. Dual rail design allows
LCD screen and keyboard tray operated independently. No need to install additional
software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) DVI, VGA graphic card (HDMI graphic card for HDMI option)
Note: the max. resolution of the integrated LCD display is 1920x1200. Make sure the
resolution of any connected computer does note exceed this resolution.
(2) USB port for keyboard and mouse.
1.3.2 Cables
(1) DB-15 VGA cable male to male
(2) USB A Type Cable
(4) Audio Cable
(3) DVI-D Cable male to male
(3) USB 2.0 Hub for peripheral USB device
(5) HDMI Cable (option)

- 5 -
1.4 Product Specifications
Model RM-DF117A
Brightness 300cd/m2
Contrast 650:1
Angle of visibility 140°(H),120°(V)
Color display 262K
Keyboard
Mouse Keyboard/Mouse
DVI-D
VGA HD-15 female connector
Local Control
Terminal
USB 2.0 For USB peripheral device
Video resolution 1920 x 1200 @75Hz
Power supply
Housing Metal housing
Weight 15Kg
Dimension(W x H x D)
104 keys
touch pad mouse
100-240V AC 50/60Hz via IEC Type power cord
482 x 44 x 685(mm)
24 pin DVI-D female connector
USB 2.0

- 6 -
1.6 Front View
NO Part Function Description
1 Handle to adjust screen opsition
2 LCD display
3 Keyboard
4 Touchpad
2
3
4 6
1
5
5 LCD OSD button
6 Mounting bracket Install into rack cabinet
LCD button to control Screen Display position and
image setting.
7 USB2.0 HUB port
7

- 7 -
1.7 Rear View
No Component Function Description
1 AC Power port Standard IEC Type AC Inlet
2 Power Switch Rock switch, turn on/off equipment main power.
3 Audio port For audio function
4 VGA port Connect to server or KVM.
5 USB port
6 DVI port Connect to server or KVM.
7 USB 2.0
1 2 3 4
5
Connect to server or KVM.
677
For USB peripheral device

2 Installation
2.1 Rack Installation
- 8 -
Step 1
Step 2
Attach the two rear slide rails to the rear vertical mounting rails ofthe rack cabinet using
standard M6 cage nuts and screws.
Step 3
Position the LCD console drawer so the two rear slide rails will slide into the main body
of the LCD console drawer. Attach the mounting ears of the LCD console drawer to the
front vertical mounting rails of the rack cabinet using standard M6 cage nuts and screws.
Rear Cabinet Rails
Rear Slide Rails
Loosen screw Aon both sides to slide out and remove the two rear slide rails.

- 9 -
2.2 Standard Installation
Please follow the installation drawing and instructions below for standard installation:
* Please Shutdown the Power of Equipment Needs to be Connected
* Please Pay Attention to Earthing of Equipment
The standard installation is completed, and LCD KVM console can be powered on. Then
power on connected hosts.
RM-DF117A-REAR-CHASSIS

- 10 -
2.3 LCD KVM Console and KVM Cascade Installation
LCD KVM console port can be directly connector to another KVM Switch as cascade to
Perform unified management all connected hosts. Please follow the installation drawing
and instructions for standard installation:
(1) Make sure to power off all equipment to be connected and existing equipment.
(2) Switching slide switch on USB position
(3) Use an USB / VGA cable to connected the LCD and KVM switch console port.
(4) Turn on the KVM and LCD console power first and then power on hosts to prevent loss of
any keyboard or mouse.
Cascade connection drawing:
VGA USB VGA
USB