Avenview PG-HDSDI User manual
www.avenview.com
1
HD/SD-SDI Pattern Generator
User Guide
Models
PG-HDSDI
© 2009 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 5
1.7 Panel Description................................................................................................................... 6
1.7.1 Top Panel............................................................................................................................... 6
1.7.2 Front Panel ............................................................................................................................ 6
1.8 Menu Operation .................................................................................................................... 7
1.9 Appendix .............................................................................................................................. 11
Section 2: Specifications....................................................................................................................... 14
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview PG-HDSDI, HD/SD-SDI Pattern Generator has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipments, the
HDMI-C5SP-4 should be used with care. Read the following safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview PG-HDSDI is an advanced SDI pattern generator with multi-format (HD/SD) and multi-pattern
support. Besides still and moving video test patterns, other features such as Closed Caption (CC) (EIA-608) and
VANC (SMPTE-334M) are also provided. With portable size, PG-HDSDI is equipped four buttons and LCM
screen to ease the control. This device provides a cost effective way to calibrate and test SDI enable video
devices and displays.
-Supported output resolution
oNTSC 525@60, PAL 625@50, [email protected], 720p@24, 720p@25, [email protected], 720p@30,
oBit Rate: 1.485 Gbps, 1.4835 Gbps, 270Mbps
oResolution: 10bitHDCP compliant
-Video Patterns
o100% Color Bars, Borderline, Random Noise, Check Field, Black, Vertical Lines, Black / White
alternate fields, Full Grey / Full White, Black to White Gradient, Random Generator for all
still patterns, moving squares White noise, Inverse effect with still pattern, Scrolling Title
Acts as 2X1 HDMI Switch and 1X4 HDMI over CAT5 Splitter
-Save settings to memory option
-ANC Data: EDH (RP-165), SMPTE 352M, SMPTE 334M, EIA-608, SMPTE-12M
-Control: LCM & Panel Buttons
-Video Output: Dual SDI Ouput
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-PG-HDSDI x 1
-Power Adapter (+5VDC) x 1
-User’s Manual x 1
www.avenview.com
5
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
www.avenview.com
6
1.7 Panel Description
1.7.1 Top Panel
Button
Function
Menu
Trigger the menu operation
Enter
Enter the menu item
Up
Choose the last menu item
Down
Choose the next menu item
1.7.2 Front Panel
Connector
Function
OUT1, OUT2
HD/SD SDI Output
+5V DC
5V Power Input
www.avenview.com
7
1.8 Menu Operation
Menu
Items
01 Format
Resolution
NTSC
PAL
720p
1080p
1080i
Frequency
60
59.94
50
30
29.97
25
24
23.98
Output
YCbCr 422
02 Video
Patterns
SMPTE Bar
100% Bar
Check Field 1
Check Field 2
www.avenview.com
8
Check Field 3
Gradient R1
Gradient G1
Gradient B1
Gradient R2
Gradient G2
Gradient B2
Gradient R3
Gradient G3
Gradient B3
Gradient R4
Gradient G4
Gradient B4
Red Level 1
Red Level 2
Green Level 1
Green Level 2
Blue Level 1
Blue Level 2
100% Red
100% Green
100% Blue
100% While
70% Gray
40% Gray
www.avenview.com
9
Black
Noise
Circle 1
Circle 2
Moire
H Stripe R
H Stripe G
H Stripe B
V Stripe R
V Stripe G
V Stripe B
Chess 1
Chess 2
Sequence
Text
Off
On-White
On-Black
Timer
Off
On-W/B
On-B/W
03 Audio
Not available in this model
04 Motion
Motion
No Motion
Square 1
Square 2
2 Squares
www.avenview.com
10
Square Inv
Speed
1
2
3
4
5
6
7
8
05 ANC Data
CC
Off
On
Time Code
Off
On
VANC
Off
On
SMPTE-352M
Off
On
EDH
On
06 System
Status
No Change
Factory
Now Save
Version
V1.00
Table of contents
