AVF Group JNL202 User manual

0333 320 0463
CUSTOMER SERVICES HELP LINE NUMBER:
STOP
Read through ALL instructions before commencing installation.
If you have any questions about this product or issues with installation, contact
the customer services helpline before returning this product to the store.
AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England
JNL202
jl.avfgroup.com
20 kg
44 lb
466525 rev03

Assembly Overview
Tools Recommended
Connect the TV
Fit the TV Mounting Plate
Stud Finder
Ø10mm (25/64”)
Masonry
Ø3mm (1/8”)
Wood
Fit the Wall Bracket
Suitable Wall Types
Solid Wall
Wood Stud

Index
Preparing the TV Mounting Plate
2
Fitting the TV Mounting Plate
3
Fitting the Wall Bracket
4
Measure the TV fixing holes Width and Height
1
Retain all packaging in case the product needs to be returned.
Contents may vary from photography / illustrations.
You will not need all these parts, so expect there to be some left over depending upon the
specification of your TV.
This product is intended for indoor use only. Use of this product outdoors could lead to
failure and personal injury.
It is the responsibility of the installer to ensure that the mounting wall is of a suitable
standard and void of any services (eg gas, electricity, water etc).
AVF accept no responsibility for any damage or loss caused by installing this product in a
substandard wall.
Assemble the Bracket
5
Fitting the Wall Covers
6
Connecting the TV
7

Boxed Parts
AC
D
Rx3 Sx3
M6
12mm
Kx1
M6
J2x1
M5
Nx8
M5
12mm
Mx8
L1
B1
B2
L2
L2L1
5mm
4mm
Tx1
J1x1 Ix1
M6
Hx2
M6
F1x1
M6
Ex1
M6
Gx1
M6
F2x1
Use Height Calculator result
to position top drill hole
TOP
TV Centre Line
WT

TV Screws, Reducers and Spacers
M4
16mm
Q1x4
M4
25mm
Q2x4
M5
16mm
Q3x4
M5
25mm
Q4x4
M6
16mm
Q5x4
M6
25mm
Q6x4
M8
16mm
Q7x4
M8
25mm
Q8x4
P1x4 P2x4
O1x4 O2x4
If width X is greater than mm or height Y greater than mm
STOP installation now and contact the customer help line.
200 200
X50 - 200mm
Y50 - 200mm
TV Fixing Holes
Q3/Q4
M5 =
Q5/Q6
M6 =
Q7/Q8
M8 =
Q1/Q2
M4 =
You are provided with diameters of TV
fixing screws,
Determine the screw diameter that fits
and remember for step
4
3
, M4, M5, M6 and M8.
Measure the TV fixing holes Width and Height
1

Use the option that fits your TV
OPTION 2
D
75
mm 50 mm
50mm
75mm
Y100
mm
X
100mm
X200mm x Y100mm
OPTION 1
X50mm x Y50mm
X75mm x Y75mm
X100mm x Y100mm
OPTION 3
X200mm x Y200mm
OPTION 1
X100mm x Y200mm
Preparing the TV Mounting Plate
2
If in any doubt please call the customer helpline
If your TV fixing holes match any of the sizes shown above you will not need to use
any adaptors. Please go to step
3.

L1D
L1
L2
L2
M
N
M5
Nx8
M5
12mm
Mx8
Example shown is 200 x 200 fixings
OPTION 2 OPTION 3
Y
100mm
X
200mm
Y
200mm
X
200mm
Y
200mm
X
100mm
Top

No Spacers Spacers
WARNING
For TVs with irregular / obstructed back.
For TVs with flat / unobstructed back.
TV TV TVTV
After completing step you will have fixings left over, please keep for future reference.
3
P1/P2
Fitting the TV Mounting Plate
3

Q1 - Q8
Q3-Q6
Q7-Q8
O1
O2
Q1-Q2
P1
P2
Top If required
OPTION 2 & 3
OPTION 1
Q1 - Q4
P1
P2
If required
Top
Do you need
O1or O2?

Fitting the Wall Bracket
4
Solid Wall Wood Stud
Remove Dust from Hole. Ensure bracket is in the centre of the wood stud
10mm (25/64")
75mm (3")
3mm (1/8")
75mm (3")
WTWT

Lubricate screw thread with soap.
DO NOT overtighten screws. Tighten screws by hand only.
Rx3 Sx3 Rx3
R
R
S
12.5mm (½”)
MAX
Lubricate screw thread with soap.
DO NOT overtighten screws. Tighten screws by hand only.

Assemble the Bracket
5
I
F2
C
G
H
E
F1
E
H
F2
G
H
i ii
iii

Fitting the Wall Covers
6
B1
B2
Click!
Click!
Click!
Click!
i ii
iii iv
Carefully bend apart the 2 highlighted sections
shown above and then slide into position
Carefully bend apart the 2 highlighted sections
shown above and then slide into position

Attach TV
Connecting the TV
7
TV Locking
K
M6
12mm
Kx1
M6
J2x1 J1x1
5mm
4mm
Tx1
J2J1
T

x2
Optional
Lock tilt
T
T
DO NOT overtighten
Storing the Allen Key
i ii iii
T
x1
TV Levelling