Press
Press
Press Twice
Back
Press “R/+” and hold 3S Show the current Date, time, and temp
Press “L/ - ” and hold 3S Test Cable Resistance
Menu
Clear
Group
FastCharge
Waiting 3S
L
PC
Applicatione Main Control IC:STM32 F072
Display screen:TFT 1.44" 128*128
Voltage Current Range :4-26V(0-26V PC) 0-6A
Voltage Current Resolution:0.0001V 0.0001A
Voltage Current Accuracy:0.1%+2d 0.1%+2d
Quiescent Current:0.4mA
QC2.0 QC3.0 Trigger PD Analysis/Monitor:Support
PC Tool suite:Support
USB Firmware Update:Support
Technical Specifications
-5- -6-
-7- -8-
Press “Enter”
and hold 3S
Press “R/+” and hold Switch direction of the screen
Offline
Recording
R/+
Press Twice
Back
Press “Enter”
The device can store at most 4 curves
each curve can store data of 3750 points.
Connect the device to the PC with a micro USB cable.(5V PC only)
For the first time, you should install the driver. Click the "Install Driver"
menustrip to run the driver installer.
Electronic Load Parameters:
Applied voltage range: DC 3.7V-13V
Adjustable current range: 0.15A-3.00A
Electricity discharging: continuous 15W
Temperature control: about 40 ℃(Caution High Temperature)
Get Manual,Firmware,PC APPfrom www.avhzy.com Support.
Other common instructions
Get PC APPfrom www.avhzy.com Support.
Press Twice
Back
Caution the voltage it
connected by in case of
damage
If the screen didn't light up,
flip the cable on any side
of the meter.