Avid Technology AE-350W User manual
Wireless In-Ear Earphones
Operating Instructions AE-350W
Before reading, review the illustrations and familiarize yourself with
all the functions of the device.
(11) (12) (13)
(10)
(9)
(3)
(1)
(2)
1Operating Instructions 2AEB-350W
(5)
(4)
(7)
(8)
(6)
(14)
Quick
Start
Guide
(15)
i
(16)
AVID Products, Inc.
2
Parts description/operating components
(See inside front cover for illustrations)
(1) Earphones
(2) Power button also serves
other functions such as
music and phone functions
(3) Neck band
(4) –button (decrease volume;
previous track)
(5) +button (increase volume;
next track)
(6) Pairing button
(7) Operating/charging LED
(8) Charging socket (Micro-USB)
(9) Ear hook
(10) Ear cushions
(medium - on earphones)
(11) Ear cushions (small)
(12) Ear cushions (large)
(13) Charging cable
(USB to Micro-USB)
(14) Quick start guide
(15) Operating instructions
(16) Pouch
3Operating Instructions 2AEB-350W
INTRODUCTION
Information about these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions
are part of this product. They contain valuable information about
safety, usage, and disposal. Before using the product, please
familiarize yourself with all operating and safety instructions. Use
the product only as described and for the range of applications
specied. Keep these operating instructions as a reference and store
them near the product. Please pass on all documentation including
these operating instructions to any future owner(s) if you sell this
product or give it away.
AVID Products, Inc.
4
Copyright
This documentation is protected by copyright. Any copying or
reproduction, including in the form of extracts, or any reproduction
of images (even in a modied state), is permitted only with the
written authorization of the manufacturer.
Notes on trademarks
• The AVID trademark and name are the property of their
respective owner.
All other names and products may be trademarks or registered
trademarks of their respective owner(s).
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
5Operating Instructions 2AEB-350W
any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
AVID Products, Inc.
6
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
7Operating Instructions 2AEB-350W
Warning
The following warnings are used in these operating instructions:
DANGER!
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in severe injuries
or even death.
> Follow the instructions in this warning notice to avoid the risk of
serious injuries or death.
CAUTION
A warning notice at this hazard level indicates the risk of
property damage.
Failure to avoid this situation could result in property damage.
>Follow the instructions in this warning to prevent material damage.
AVID Products, Inc.
8
NOTE
> A note provides additional information that makes handling the
appliance easier for you.
SAFETY
This section contains important safety instructions for handling
the device. This device complies with statutory safety regulations.
Improper use may result in personal injury and property damage.
Basic safety instructions
To ensure safe operation of the appliance, follow the safety
guidelines set out below:
• Check the earphones for visible external damage before use.
Do not operate damaged earphones.
9Operating Instructions 2AEB-350W
• If the earphones, cables or connections are damaged, contact
AVID Customer Care (see pg 31).
• These earphones may be used by children aged 12 years and
above and by persons with limited physical, sensory or mental
capabilities or lack of experience and knowledge, if they are
under supervision or have been told how to use the earphones
safely and are aware of the potential risks. Do not allow children
to use earphones as a toy. Cleaning and user maintenance tasks
may not be carried out by children unless they are supervised.
• DANGER! Do not allow children under 12 to use earphones or
play with the packaging material! Keep all packaging materials
away from children. The package includes parts that can be
swallowed. There is a risk of suffocation!
• Protect the charging cable from hot surfaces and sharp edges and
ensure that it is not stretched tight or kinked.
AVID Products, Inc.
10
• Do not make any unauthorized modications or alterations to
the earphones.
• Never open the housing of the earphones. There are no parts
inside which can be maintained. In addition, this will invalidate
the warranty.
• Do not place objects lled with liquids (such as vases or open
drinks) next to the earphones.
• Protect the earphones from penetration by moisture and liquids.
• The earphones may heat up while charging. Place the earphones
in a well-ventilated location during the charging process and do
not cover them.
• Do not operate or place the earphones close to open ames
(e.g., replaces, candles, oven stove or etc.).
11Operating Instructions 2AEB-350W
• The earphones have an integrated rechargeable Li-ion battery
Improper use of lithium polymer batteries can cause res,
explosions, leakage of hazardous materials or other hazards!
Do not throw the earphones into an open re.
• If you notice unusual noises, a burning smell or smoke coming
from your earphones, remove the earphones from your ears
immediately and disconnect any attached charging cable.
Contact AVID Customer Care (see pg 31) before using them again.
Risk of hearing damage
DANGER!
Risks from extremely high-volume levels!
Loud music can lead to hearing damage.
>Avoid listening to music at an extremely high volume, especially
over long periods of time, when using these earphones.
AVID Products, Inc.
12
Risk of accidents
DANGER!
Risk of impaired perception!
> Acoustic warnings/notication signals and ambient noise can sound
different when you are wearing these earphones. Make yourself
aware of how these signals deviate from their sound so that you
can recognize the signals in appropriate situations.
>Do not use the earphones while driving a vehicle, riding a bicycle,
operating machinery or in any other situation in which impaired
perception of ambient noise could put you or other people in
danger. Please also observe the statutory provisions and
regulations of the country in which you are using earphones.
13Operating Instructions 2AEB-350W
USE
Unpacking
• Remove all parts and the operating instructions from the box.
• Remove all packaging material.
Check package contents
(See inside front cover for illustrations)
The product includes the following components:
• Earphones (1) with pre-tted ear cushions (medium size (10))
• 2 pairs of ear cushions (small (11) and large (12))
• Charging cable (13) (USB to Micro-USB)
• Pouch (16)
• Quick start guide (14)
• These operating instructions (15)
AVID Products, Inc.
14
NOTE
>Check the package for completeness and signs of visible damage.
>If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact AVID Customer Care.
Disposal of the packaging
The packaging protects the appliance from damage during
transport.
The packaging materials have been selected for their environmental
friendliness and ease of disposal and are therefore recyclable.
Please recycle packaging in accordance with
your local regulations.
15Operating Instructions 2AEB-350W
Charging the battery
Before using the earphones (1), the integrated battery must be
charged fully.
• Connect the USB plug of the charging cable (13) to a turned-on
PC or a suitable USB power supply (not included).
• Connect the Micro-USB plug of the charging cable (13) to the
charging socket (micro-USB) (8) on the earphones (1).
CAUTION
>Only charge the earphones (1) in dry indoor spaces.
>Only use USB power adapters with an output voltage of 5 V and
an output current of at least 0.5 A or a USB port on your computer
to charge the earphones (1).
>Use the supplied charging cable (13) to charge the earphones (1).
AVID Products, Inc.
16
>Always disconnect the charging cable (13) when charging
is complete!
NOTE
>The operating/charging LED (7) lights red during charging. When the
battery is fully charged, the operating/charging LED (7) turns off.
>Charging takes about 1.5 hours when the earphones (1) are fully
discharged.
Inserting earphones
• Place the neck band (3) around your neck.
• When putting in the earphones (1), pay attention to the markings
“R” (right) and “L” (left) on the earpieces.
• Insert one of the earphones (1) into your ear canal (see Fig.1).
17Operating Instructions 2AEB-350W
• Hook the ear hook (9) over your ear to ensure that the
earphone (1) sits rmly (see Fig.2).
• Proceed in the same way to insert the other earphone (1).
Fig.1 Fig.2
AVID Products, Inc.
18
Pairing the earphones with a wireless enable device
Before you can use the earphones (1), you must pair them with a
compatible wireless device. Procedure as follows:
• Ensure that the earphones (1) are turned off and the wireless
enable device is turned on.
• Set the wireless device so that it scans for other wireless devices.
A detailed description of how to do this can be found in the
operating instructions for your wireless enable device.
• Press the power button (2) for 3 seconds to turn the
earphones (1) on. The LED will briey turn red and you will hear
the voice announce, “Power ON”. After a few seconds, the voice
will announce “Pairing” and the LED (7) will begin to alternately
ash red and blue.
Table of contents
