AVLink DB-01S User manual

DVI / HDMI
EQUALIZER
(DB-01S) (DB-01D)
(HB-01)
USER MANUAL V1.2
DB-01S / DB-01D / HB-01
Package Contents-
1 AVLINK DB-01S or DB-01D or HB-01 Equalizer
1 user manual
Any thing missed, please contact with your vendor.
Introduction
By the DB-01S/DB-01D/HB-01 product, the transmission
distance of the DVI or HDMI output equipment can be
extended.
Features
Equalization (DVI or HDMI) long cable length.
Support HDCP.
Support Dual Link. (Only DB-01D)
The power provided by the DVI or HDMI connector is
used, and thus external power supply is not required.
Specifications
Function DB-01S DB-01D HB-01
Input Connector 1 DVI Female HDMI A-Type
Female
Output Connector 1 DVI Female HDMI A-Type
Female
Max. Resolution UXGA,
1080i UXGA, 1080p UXGA, 1080i
Source Side
Cable Distance 50 m (Max.)
HDTV Side
Cable Distance 5 m (Max.)
Power Adapter DC 5V 1A (Min.) spare
Housing Metal
Weight 138 g 139 g 132 g
Dimensions (LxWxH)
mm 67x56x38 67x46x38
-1-
DB-01S/DB-01D FRONT VIEW
1. DVI IN
2. Power jack
DB-01S/DB-01D REAR VIEW
1. Power LED
2. DVI OUT
HB-01 FRONT VIEW
1. HDMI IN
2. Power jack
HB-01 REAR VIEW
1. Power LED
2. HDMI OUT
-2-

Installation
1. Connect the DVD HDMI (or DVI) output connector and
HB-01 (or DB-01S/DB-01D) input connector with HDMI
(or DVI) cable.
2. Connect the HB-01 (or DB-01S/DB-01D) output
connector and HDTV HDMI (or DVI) input connector
with HDMI (or DVI) cable.
3. Turn on the DVD and HDTV.
Note: since this product obtains electric power from the
HDMI (or DVI) connector of the DVD and the length of
cable exceeds 30m, there may be an abnormal display or
no display of the HDTV. In such case, install a special EQ
power adapter to fix the problem. Other power adapters
are prohibited to avoid possible damages to the product.
Technical Specifications
Input/Output Signal
1. DVI
Pin # Signal Pin # Signal
1 TMDS Data2- 16 Hot Plug Detect
2 TMDS Data2+ 17 TMDS Data0-
3 TMDS Data 2/4 Shield 18 TMDS Data0+
4 TMDS Data4- 19 TMDS Data 0/5 Shield
5 TMDS Data4+ 20 TMDS Data5-
6 DDC Clock 21 TMDS Data5+
7 DDC Data 22 TMDS Clock Shield
8 Analog Vert. Sync 23 TMDS Clock+
9 TMDS Data1- 24 TMDS Clock-
10 TMDS Data1+
11 TMDS Data 1/3 Shield C1 Analog Red
12 TMDS Data3- C2 Analog Green
13 TMDS Data3+ C3 Analog Blue
14 +5V Power C4 Analog Horz Sync
15 GND C5 Analog Ground
-3-
2. HDMI
Pin # Signal Pin # Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock -
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved
(N.C. on device)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5 Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
Additional Options
Select any additional options you may require.
1. 30M DVI-D Cable (1L-DD300)
2. 50M DVI-D Cable (1L-DD500)
-4-
3. 30M HDMI Cable (1L-HD300)
4. 50M HDMI Cable (1L-HD500)
5. EQ PowerAdapter (PAD05UP)
AC 100~240V to DC 5V/1A
This company is not liable for damages to the product
caused by using other unspecified power adapter.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-5-