Avocent SST-64P Installation and maintenance instructions

Installer/User Guide
SST-64P PCI Adapter
and Subsystem

USA Notification
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Canadian Notification
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le Ministère des Com-
munications du Canada.
Safety and EMC Approvals and Markings
IEC 60950-1:2000, EN 60950-1:2001, UL 60950 3rd Ed. / CSA 22.2 No. 60950:2000,
EN 55022:1998+A1:2000+A2:2003, EN 61000-3-3:1995+A1:2001 EN 55024:1998+A1:2001+A2:2003,
FCC Part 15 Class A

SST-64P PCI Adapter
and Subsystem
Installer/User Guide
Avocent and the Avocent logo are registered trademarks of Avocent
Corporation or its affiliates. All other marks are the property of their
respective owners.
© 2006 Avocent Corporation. All rights reserved. 590-629-501A

Instructions
This symbol is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Dangerous Voltage
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Power On
This symbol indicates the principal on/off switch is in the on position.
Power Off
This symbol indicates the principal on/off switch is in the off position.
Protective Grounding Terminal
This symbol indicates a terminal which must be connected to earth ground prior to making any other
connections to the equipment.

iii
Table of Contents
List of Figures .................................................................................................................. v
Chapter 1: Product Overview.......................................................................................... 1
Features and Benefits ........................................................................................................................ 1
The SST-64P PCI Adapter ................................................................................................................. 1
Compatibility with Prior Models ....................................................................................................... 2
Rack Mount Safety Considerations.................................................................................................... 2
Part Numbers..................................................................................................................................... 3
Chapter 2: Installation and Configuration ..................................................................... 5
Getting Started................................................................................................................................... 5
Items supplied with the SST-64P PCI adapter ........................................................................... 5
Additional items needed.............................................................................................................. 5
Installing the SST-64P PCI Adapter.................................................................................................. 6
Installing Port Modules ..................................................................................................................... 7
Port Module LEDs ............................................................................................................................. 7
Using rack mount ears................................................................................................................ 8
Using an HBC............................................................................................................................. 8
Using 4-foot and 1-foot HBCs ....................................................................................................8
Using EBCs................................................................................................................................. 9
Power Options ................................................................................................................................. 10
Chapter 3: Port Module to Device Cabling .................................................................. 15
RJ-45 Connectors ............................................................................................................................ 15
Port Module Port Pinouts................................................................................................................ 15
Modular Cables ............................................................................................................................... 18
Modular Adapters ............................................................................................................................ 18
Index................................................................................................................................ 21
TABLE OF CONTENTS

iv SST-64P PCI Adapter Installer/User Manual

v
List of Figures
Figure 1.1: SST-64P PCI Adapter..................................................................................................... 1
Figure 1.2: SST-64P PCI Adapter Compatibility .............................................................................. 2
Figure 2.1: Installing the SST-64P PCI Adapter............................................................................... 6
Figure 2.2: Port Module.................................................................................................................... 7
Figure 2.3: Port Module Mounting Options...................................................................................... 8
Figure 2.4: SST-64P PCI Adapter - Host Bus Cable - Port Module................................................. 8
Figure 2.5: SST-64P PCI Adapter with Four Port Modules Connected using HBCs....................... 9
Figure 2.6: 100 Foot (30.5 m) EBC................................................................................................... 9
Figure 2.7: Port Modules Extended Distance Using EBCs............................................................. 10
Figure 2.8: Default Power JumperSettings .....................................................................................11
Figure 2.9: Connected Port Modules Draw Power from Host........................................................ 12
Figure 2.10: PS-4 Supplying Power to Port Modules ..................................................................... 13
Figure 2.11: Individual PS-4s Provide Power to Port Modules Separated by EBCs ..................... 13
Figure 3.1: Port Module Connector Pinouts...................................................................................15
Figure 3.2: RJ-45 Jack Pinouts ....................................................................................................... 16
Figure 3.3: Cable Pinouts for RJ-45 to Terminal/Printer DB-25 ................................................... 16
Figure 3.4: Cable Pinouts for RJ-45 to PC DB-9 ...........................................................................17
Figure 3.5: Cable Pinouts for RJ-45 to Modem DB-25 .................................................................. 17
Figure 3.6: RJ-45 Modular Cable Signals ...................................................................................... 18
Figure 3.7: Ten-wire Modular Adapters Internal Wiring ............................................................... 19
LIST OF FIGURES

vi SST-64P PCI Adapter Installer/User Manual

1
CHAPTER
1Product Overview
Features and Benefits
The Avocent SuperSerial Technology (SST) expandable I/O subsystem is a high-speed serial
communications multiple port product. It consists of modular components that can be configured in
a variety of combinations to satisfy most applications.
The SST-64P PCI Adapter
The SST-64P PCI adapter (see Figure 1.1) occupies one PCI slot in the host computer and provides
the intelligent communications functions to “off-load” the CPU from serial communications
processing tasks.
The SST-64P PCI adapter contains one SuperSerial Processor, which controls up to 64 ports.
Figure 1.1: SST-64P PCI Adapter
Each SST-64P PCI adapter includes software drivers and installation manuals for Microsoft
Windows, Linux and UNIX operating systems on a CD ROM. When booted, the PCI bus system
automatically identifies and configures all PCI devices connected to the system.

2SST-64P PCI Adapter Installer/User Manual
Compatibility with Prior Models
Low profile SST-64P PCI adapters and rack-optimized port modules are compatible with the same
device drivers as prior models, and you can use them with the same cables, modular adapters and
port modules. You can also use rack-optimized port modules with prior model SST-64P adapters
and port modules. Low profile SST-64P PCI adapters may be installed together with prior model
SST PCI adapters in the same server.
Figure 1.2 illustrates compatibility among rack-optimized port modules and prior models.
Figure 1.2: SST-64P PCI Adapter Compatibility
Rack Mount Safety Considerations
• Elevated Ambient Temperature: If installed in a closed rack assembly, the operation
temperature of the rack environment may be greater than room ambient. Use care not to exceed
the rated maximum ambient temperature of the unit.
• Reduced Airflow: Installation of the equipment in a rack should be such that the amount of
airflow required for safe operation of the equipment is not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
• Circuit Overloading: Consideration should be given to the connection of the equipment to the
supply circuit and the effect that overloading of circuits might have on overcurrent protection
and supply wiring. Consider equipment nameplate ratings for maximum current.
INPUT
Host Bus Cable
4-Feet (1.2m)
Prior Model
Port Module
Rack-Optimized
Port Modules
ONLINE
POWER
EXTERNAL
POWER
OUTPUT 9 10111213141516
12345678
PM16
OUTPUT
INPUT
ONLINE
POWER
EXTERNAL
POWER
PM16
7 8654321 910 11 12 13 14 15 16
OUTPUT
SST-64P PCI Adapter