Avpos Bt41-1d User manual

第1 页共14 页

http://www.chinayoko.com/

用户使用手册

广州优库电子有限公司

本手册适用于 BW910、BW1、BW3

User Guide

About This User Guide

Pls read all the content of the user guide carefully to use the products safely and effectively.

You are advised of keeping it properly for your using reference.

Disclaimer

Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide

warranty or replacement service.

The pictures in this user guide are for reference only. If there are any pictures which not

match the actual product, please take actual products as the standard. Updated information

is subject to change without notice.

All information contained in this guide are protected by copyright, and our company

reserves all rights. All or part of this guide isprohibited to excerpt, copy, bundle other

products, or sell without the written permission from us.

INDEX

1、Product Introduction ............................................................................................................................................. 1

1.1 Main feature ................................................................................................................................................ 1

1.2 Unpack your device.................................................................................................................................... 1

1.3 Product display........................................................................................................................................... 2

1.3.1 External view.................................................................................................................................... 2

1.3.2 Size（mm）..................................................................................................................................... 2

1.4 Communication port................................................................................................................................... 2

1.5 Connect your device.................................................................................................................................. 3

1.5.1 Connect with USB........................................................................................................................... 3

1.6 Start-up, shutdown and restart................................................................................................................. 3

1.7 Maintenance................................................................................................................................................ 3

1.8 Reading skills.............................................................................................................................................. 4

2、System Setting .................................................................................................................................................. 5

2.1 Mark setting................................................................................................................................................. 5

2.2 setting barcodes......................................................................................................................................... 5

2.2.1 Reset to Default Configuration...................................................................................................... 5

2.2.2 scan mode setting........................................................................................................................... 5

2.2.3 data transport mode setting........................................................................................................... 6

2.2.4 Hibernate setting............................................................................................................................. 6

2.2.5 Codabar............................................................................................................................................ 6

2.2.6 Interleaved 2 of 5............................................................................................................................. 7

2.2.7 Code 128.......................................................................................................................................... 8

2.2.8 Code 39............................................................................................................................................ 8

2.2.9 EAN-8................................................................................................................................................ 9

2.2.10 UPC-E............................................................................................................................................. 9

2.2.11 Code 93 .......................................................................................................................................... 9

2.2.12 EAN-13 to ISBN............................................................................................................................ 9

2.2.13 EAN-13 to ISSN.......................................................................................................................... 10

2.2.14 UPC-A to EAN-13 ....................................................................................................................... 10

1、Product Introduction

This user guide applies to BT41-1D scanners. The scanners above are of strong

identification capability, and support automatic continuous scanning mode with fast and

flexible scanning speed.

In this chapter, we will introduce the instruction of scanner with pictures, please

compare to the scanner you bought when reading this user guide, which is good for your

understanding. This chapter applies to regular users, maintenance personnel, and software

developers.

1.1 Main feature

* Complete independent research and development, possessing the complete set of

patent, plug and play without the need to install driver.

* Wide voltage design to avoid the data can’t be transmitted due to voltage fluctuation.

* 32-bit master chip equipped with patented software, the scanner can smoothly decode

reflective, wrinkled, blurred, and colorful barcode, and can also normally scan in light and

dark environment.

* Adopt all tantalum capacitors and anti-oxidation optical technology, avoiding the

problem of performance declining after long-term using.

1.2 Unpack your device

After you open the shipping carton containing the product, take the following steps:

Take the accessories for scanner out from package.

Check with the packing list to see if everything is complete and in good condition.

If there are any damaged or missing components, please keep the original

package and contact your supplier for after-sales service.

1.3 Product display

1.3.1 External view

1.3.2 Size（mm）

front view

side view

1.4 Communication port

The scanner must be connected to a host to operate. Host can be a PC, POS machine,

intelligent terminal with USB interface.

USB

USB interface on host

Receiver

1.5 Connect your device

1.5.1 Connect with USB

1: Connect the device interface of USB with

scanner ;

2: Connect the host interface (USB interface) of

USB with host computer.

1.6 Start-up, shutdown and restart

Start-up：Connect host computer with scanner, which will automatically start-up and in

working state.

Shutdown：Remove the data cable which is connected with scanner; remove the USB which

is connected with host computer.

Restart：If the scanner crashes or doesn't respond, please switch it off and restart.

1.7 Maintenance

The window must be kept clean, the supplier do not bear the guarantee responsibility due to

the improper maintenance.

Avoid the window being wear and tear or scratched by hard object

Use the hairbrush to remove the stain on the window

Clean the window with a soft cloth, such as lens cleaning cloth

Spraying liquid onto the window is prohibited.

Prohibit any cleaning solvents, except for the cleaning water.

1.8 Reading skills

If the barcode is small, it should be closer to the scanning window; if the barcode is

large, it should be far away from the scanning window a little more, thus easier to be read

correctly.

If the barcode is highly reflective (for example, the coated surface), you may need to tilt

the barcode at an angle to successfully scan it.

Barcode scanning example：

Reset to Default Configuration

2、System Setting

Option and function setting mainly through reading a series of special barcodes. In this chapter, we

will provide you a detailed introduction of the options and functions available for user setting, and the

corresponding setup code.

This scan to set method is direct, easy to understand and user friendly.

2.1 Mark setting

2.2 setting barcodes

2.2.1 Reset to Default Configuration

2.2.2 scan mode setting

Reset to Default Configuration

Manual key scan

Continuous scan

Reset to Default Configuration

2.2.3 data transport mode setting

2.2.4 Hibernate setting

2.2.5 Codabar

No time-out

Time-out after 50 min

Disable Codabar

Real-time transport

Storage mode

Display stored barcode

Upload stored barcode

Clear all stored barcode

Time-out after 30 sec

Time-out after 5 min

Enable Codabar

Reset to Default Configuration

2.2.6 Interleaved 2 of 5

Enable ITF 25

Disable ITF 25

Enable ITF25 (No Fixed Length)

Enable ITF25 (Fixed Length

of 6 Digits)

Enable ITF25 (Fixed Length

of 8 Digits)

Enable ITF25 (Fixed Length

of 10 Digits)

Enable ITF25 (Fixed Length

of 12 Digits)

Enable ITF25(Fixed Length

of 14 Digits)

Enable ITF25 (Fixed Length

of 16 Digits)

Reset to Default Configuration

2.2.7 Code 128

2.2.8 Code 39

Enable ITF25 (Fixed Length

of 18 Digits)

Enable ITF25 (Fixed Length

of 20 Digits)

Enable ITF25 (Fixed Length

of 22 Digits)

Enable ITF25 (Fixed Length

of 24 Digits)

Enable Code 128

Disable Code 128

Enable Code 39

Disable Code 39

Reset to Default Configuration

2.2.9 EAN-8

2.2.10 UPC-E

2.2.11 Code 93

2.2.12 EAN-13 to ISBN

Enable Code EAN-8

Enable Code UPC-E

Disable UPC-E

Enable Code 93

Disable Code 93

Enable EAN-13 to ISBN

Disable EAN-13 to ISBN

Disable Code EAN-8

Reset to Default Configuration

2.2.13 EAN-13 to ISSN

2.2.14 UPC-A to EAN-13

Enable EAN-13 to ISSN

Disable EAN-13 to ISSN

Enable UPCA to EAN-13

Disable UPCA to EAN-13

Table of contents

AVPos BT41-1D User manual

Popular Barcode Reader manuals by other brands