AWC AWR-RP9000N User manual
User Manual
AWR-RP9000N
Repeater
User Instructions
Please carefully read this manual before attempting to deploy the repeater. The
instructions will explain the various features of this repeater. Please retain
these instructions for future reference.
Safety Instructions
personal injury, or equipment damage.
•Do not modify the Repeater in any way.
• Do not expose the Repeater to direct sunlight for extended periods of time,
locate near heaters or other heat sources.
•Do not store or use unprotected radio for prolonged periods in areas of high
dust or excessive moisture.
•Users may experience signal interference if the unit is used near devices such
as televisions or electric generators.
•If the Repeater emits smoke or a strange smell, immediately turn off the
power, and send it to the closets repair station.
•The Repeater contains high power components that are not user serviceable
or should be tampered with.
•It is not uncommon for the body of the Repeater to be slightly warm during
operation. This is normal and the radio may continue to be used.
Hazards and Hazardous Environments
•When in areas of explosive atmospheres (gases, dust, fumes, etc.), the radio
This includes when taking on fuel or while parked at a fueling facility.
Thank you!
Thank you for purchasing this AWR-RP9000N Repeater by
Advanced Wireless Communications (AWC). The AWR-RP9000N
delivers the latest technology, has the most stable components,
and has the most advanced production technology. The AWR-
RP9000N fix installed radio will provide you with the reliable
performance and high quality you demand.
This manual should be read to ensure that the user understands
the operation of the AWR-RP9000N. Please read the Safety
Instructions before use.
Hazards and Hazardous Environments (continued)
• The radio shall not be operated in or around locations that are using blasting
devices or detonators. The radio shall be turned in the area where blasting
is in progress and in areas with signage stating that blasting is occurring. If
transporting such materials, they shall be secured in an approved container
to prevent inadvertent detonation from the radio.
• During transmissions, your radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interference,
Do not operate the transmitter in areas that are sensitive to
electromagnetic radiation such as hospitals, aircraft, and blasting sites.
• Physical exposure to radio frequency transmissions requires that the user or
bystander cannot touch the radio while it is transmitting. A distance of at least
three feet (90 cm) shall be maintained during transmission.
•The separation distance from a properly installed externally-mounted
antenna to satisfy the RF exposure requirements.
If there are any problems with the Repeater, please contact AWC or your
local distributor.
Product Safety and RF Exposure
This equipment is intended for use in occupational / controlled applications
where users have been made aware of the potential for exposure and can
exercise control over their exposure. This radio device is NOT authorized for the
general population, consumer or similar use cases.
BEFORE USING THIS RADIO DEVICE, READ ALL RELATIVE MATERIALS
IN THIS MANUAL FOR IMPORTANT OPERATION INSTRUCTIONS FOR
SAFE USAGE, RF ENERGY AWARENESS, AND CONTROL INFORMATION
FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE
NATIONAL AND INTERNATIONAL STANDARDS.
Federal Communication Commission (FCC) Regulations
The FCC has established limits for safe exposure to radio frequency (RF)
emissions from radio devices. The FCC requires manufacturers to demonstrate
compliance with RF exposure limits before radio devices may be marketed in
the U.S. When two-way radios and repeaters are approved for occupational
/ controlled environment exposure limits, the FCC requires users to be fully
aware of, and exercise control over, their exposure. Awareness and control of
RF exposure can be accomplished using labels, or by education and training
through appropriate means such as information and instructions in user
manuals or safety booklets. Your Advanced Wireless Communications‟ two-way
radio or repeater has an RF exposure information label on the device. The
training material below includes useful information about RF exposure and
helpful instructions.
Your Advanced Wireless Communications two-way radio devices are designed
and tested to comply with several national and international standards and
guidelines regarding human exposure to RF electromagnetic energy. In terms of
measuring RF energy for compliance with FCC exposure guidelines, your radio
device radiates measurable RF energy only while transmitting, not when it is
receiving, or in stand-by mode.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device , pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment
This device complies with Industry Canada license-exempt RSS standard(s): Operation
is subject to the following Two conditions:
this device may not cause interference, and
This device must accept any interference, including interference that may cause
undesired operation
of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillage radioélectrique subi, même si le
brouillage est
susceptible d'en compromettre le fonctionnement.
The information listed above provides the user with information needed to make him or
her aware of a RF exposure, and what to do to assure that this radio operates within the
RSS-102 exposure limits of this radio.
Output power listed is rated conducted. This device must be restricted to work-related
operations only in an Occupational/Controlled RF exposure environment and must
operate with a duty factor not exceeding 50%. The device complies with RF
specifications when the device used at 120 cm from your body. All qualified end-users of
this device must have the knowledge to control their exposure conditions and/or
duration to comply with occupational/controlled Exposure limit and requirements. A
label, as described in this filing, must be displayed on the device to direct users to
specific training information for meeting occupational exposure requirements.
Warning! :This radio is designed for and classified as “Occupational Use Only,”
meaning it must be used only during the course of employment by individuals aware of
the hazards and the ways to minimize such hazards. This radio is NOT intended for use
by the
“General Population” in an uncontrolled environment.
WARNING
conditions in the area to ensure the minimum separation distance is maintained
between the antenna and nearby persons for satisfying RF Exposure
compliance. The operation of this transmitter must satisfy the requirements
of Occupational/Controlled Use Only, for work-related use, transmit only
when person(s) are at least the minimum distance from the properly installed,
externally mounted antenna. “Occupational/Controlled Use Only” means
it must be used only during the course of employment by individuals aware
of the hazards, and the ways to minimize such hazards; NOT intended for
use in an General population/uncontrolled environment. Transmit only when
people outside the vehicle or away from the repeater antenna are at least the
recommended minimum lateral distance away from the antenna/vehicle. Do
Not operate the radio without a proper antenna attached, as this may damage
the radio and may also cause you to exceed RF exposure limits. A proper
antenna is the antenna supplied with this radio by the manufacturer or an
the antenna gain shall not exceed -8 dBi by the manufacturer declared. Do
Not transmit for more than 50% of total radio use time, more than 50% of the
time can cause RF exposure compliance requirements to be exceeded.
Advanced Wireless Communications Radio Quality Warranty and Liability
The warranty range and limitation
Advanced Wireless Communications (AWC) is committed to quality and stands
behind its products. A
product, repair or replace components that fail as a result of poor workmanship
or materials. This warranty does not cover improper use or intentional damage.
The warranty policy does not include the following conditions:
1. Defects or damages caused by working in abnormal or unusual situations.
2. Defect or damages caused by misuse, accident, or water submersion.
3. Defect or damages caused by unauthorized installation, repair, tampering or
adjustment.
4. Warranty does not extend to cosmetic scratches or damages as a result of
normal use or misuse.
5. This warranty is void if:
(a) The product information label is removed, or if the serial number is tampered
(b) The repeater enclosure is tampered with or unsealed.
General Items
This warranty policy establishes the liability limits for which AWC is responsible.
AWC has the right to decide, in their sole discretion, whether to repair, replace,
or refund the purchase price of any equipment subject to this warranty. There
are no other options available under this warranty. This express warranty is the
complete agreement. OTHER THAN AS EXPRESSLY SET OUT IN THESE
TERMS OR ADDITIONAL TERMS, NEITHER AWC NOR ITS SUPPLIERS OR
DISTRIBUTORS MAKE ANY SPECIFIC PROMISES ABOUT THE SERVICES
OR PRODUCTS.
CONTENTS
Unpacking and device check.....................................................................1
Packing list ..............................................................................................1
Product images ...........................................................................................1
Front panel ..............................................................................................1
Front panel functions..............................................................................1
Back panel...............................................................................................2
AUX interface pin ........................................................................................2
Installation....................................................................................................3
Status indication..........................................................................................4
LED indicator...........................................................................................4
Product operation........................................................................................4
Product Setting...............................................................................................5
1
Items
Quantity
AWR-RP9000N Repeater
1
Adapter
1
ANTENNA KIT
1
Repeater Programming Software
Available at www.advancedwireless.com
User Manual
Available at www.advancedwireless.com
Warranty Card
Available at www.advancedwireless.com
Product External
View Front Panel
No. Part Name No. Part Name
1 Power interface 5 Volume adjustment
2 Power LED 6 Microphone adjustment
3 RX LED 7 PTT
4 TX LED 8 AUX interface
Unpacking and Device Check
Please carefully remove the radio from its packaging and before disposing of the
packing materials, ensure that all the items noted below have been included. If any
item has been lost or damaged, please submit a claim with the carrier or deliverer.
2
Back Panel
Antenna
AUX interface pin
No. Part Name No. Part Name
1 9
2 10
3 11
4 12
513
614
715
8
Installation
Before installing the Repeater , please read the following precautions
carefully.
Precautions
It shall be firmly attached in the mounting location with supplied hardware to
ensure Repeater cannot break lose and cause damage or physical injury.
The Antenna shall be placed so that it does not interfere with the user when
not in use.
RXD
TXD
VBAT-BAT
GND
COR
GND
MIC
PTT
DC-OUT
AF-OUT
SPK1
SPK2
DET
/
/
3
Preparation Steps
Connecting antenna.
Connect the power supply.
Installation
•Power drill w/ appropriate drill size.
• Phillips screwdriver.
the Repeater to the desired position.
4
LED Indicator
The front panel LED indicator allows the user to determine the radio state.
Indicator Status Radio Status
Tx Red LED glows Transmitting
USB uploading data
Rx Green LED glows Receiving signal
USB download data
Power Red LED glows Normal power supply
Product Operation
Power on
Power red LED glows，The device starts running
Product Setting
1、The product is set up through Repeater Programming Software.
2、Connect Repeater communication cable.
5
3、Start Repeater Programming Software.
4、Open the menu Setting/communication Port，ConfigurationPort.
5、Programming /Read data from radio/Start，Read data completed.
6、Set the data.
7、Programming /Read data from radio/Start，Save data to Repeater.
Table of contents
