ASSEMBLY INSTRUCTIONS
VISIT AXCESSABLES.COM FOR QUESTIONS
Step 1
●Take the DJLTS-01 and push the locking pins in.
●This unlocks the hinge which allows the upper and lower
parts of the laptop stand.
●Open out to 90°.
*shown on Figure 1
Step 2
●Set up the middle shelf and insert it just below the laptop shelf.
●There are 4 pairs of holes to chose from depending on
your space preference or size of equipment.
●After the middle shelf is inserted, use the locking pins to
secure it in place.
●Locking pins can either be inserted and locked in through
the front or the back areas.
*shown on Figure 2
Figure 1
Step 3
●Test the stand for stability before putting any equipment on it.
●Make sure locking pins are secured and locked in place.
●Test it for sturdiness by giving it a quick firm shake to make
sure nothing is loose.
●Always set the equipment on a flat level surface.
Figure 2
Laptop not included
California Prop 65 Warning This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
