AxcessAbles LTS-02 User manual

aedge base clamps
b
c
d
e
f
right l - foot
plastic screw knobs
right top arm
eva non-slip pads
2
1
4
1
4
g
width adjust rods
h
i
j
k
left top arm
left l - foot
tabletop bars
m5 screws & washers
m6 screws & washers
2
1
1
4
2
4
part # part name # of pieces
®
®LTS-02 ADJUSTABLE LAPTOP STAND
WITH DESK CLAMPS
ff
c
g
e
f
d
h
i
j
k
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
f
PARTS
STANDARD TABLETOP TABLE / SHELF EDGE MOUNT PARTITION / LEDGE MOUNT
Scan QR Code to view product
details, videos and reviews.
aa
b

ANY QUESTIONS? VISIT US AT AXCESSABLES.COM
ASSEMBLY INSTRUCTIONS
1
2
- Position Right L-Foot ( B ) and Left L- Foot ( H )
over the two Tabletop Bars ( J ).
- Align the holes and screw in the smaller
M5 Screws and Washers ( K ).
- Align the screw holes of the Right Top Arm ( D )
and Left Top Arm ( G ) over the now
completed footers.
- Position the two Width Adjust Rods ( F ) to align
with the screw holes of the Right Top Arm ( D )
and Left Top Arm ( G ) the footers and insert.
- The Width Adjust Rods ( F ) is comprised of 3 separate parts
that can be unscrewed or screwed on depending on the width
of your laptop.
Side Feature

ANY QUESTIONS? VISIT US AT AXCESSABLES.COM
ASSEMBLY INSTRUCTIONS CONTINUE
3
- Secure the Width Adjust Rods ( F ) by screwing in
the Plastic Screw Knobs ( C ).
4- Stick the EVA - Non-Slip Pads ( E ) strategically
on the Right and Left Top Arms.

ANY QUESTIONS? VISIT US AT AXCESSABLES.COM
ASSEMBLY INSTRUCTIONS FOR TABLE EDGE AND LEDGE MOUNTING
1A 2A
- For Table Edge Mounting position the Edge Base Clamps ( A )
with the plastic knobs pointed downward.
- Align the screw holes to the Left L - Foot ( H ) and Right L - Foot ( B )
bottom screw holes and screw in the M6 Screws with Washers ( I ).
TABLE LEDGE MOUNTINGTABLE EDGE MOUNTING
- For Table Ledge Mounting position the Edge Base Clamps ( A )
with the plastic knobs pointed to the sides.
- Align the screw holes to the Left L - Foot ( H ) and Right L - Foot ( B )
bottom screw holes and screw in the M6 Screws with Washers ( I ).

ANY QUESTIONS? VISIT US AT AXCESSABLES.COM
ADJUSTING THE STAND’S HEIGHT
- Pick a preferred working height for
your LTS-02 Laptop Stand.
- Align the holes of the Left and Right
Top Arms to the corresponding holes
of the Left and Right L-Footers.
- Insert the Width Adjust Rods.
- Screw in the Plastic Screw Knobs.
14”
9.25”
A
NY QUESTIONS? VISIT US A
T
for
laptops
for
mixers