Axcient x360Recover User manual

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339
Introduction ................................................................................................................................... 3
Axcient Support.......................................................................................................................... 3
Warranty ..................................................................................................................................... 3
STEP 1: Open the Shipping Box ................................................................................................. 4
STEP 2: Connect the Cables....................................................................................................... 4
STEP 3: Power On the Appliance ............................................................................................... 5
STEP 4: Record the IP Address................................................................................................... 5

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339
This Quick Start Guide provides an overview of the Axcient Rack Appliance setup process,
including:
•Setting up your x360Recover (formerly Replibit) BDR Appliance hardware,
•Connecting the power and network cables,
•Locating optional ports on the Appliance, and
•Powering on your x360Recover (formerly Replibit) Appliance.
If you encounter problems during the setup process, contact Axcient support using one of the
following methods:
•Phone: [phone]
•Submit a Ticket (https://axcient.com/partner-support)
All Axcient product documentation is available in the Axcient Knowledgebase
(https://support.efolder.net).
The warranty period for this BDR was set at the time of purchase. Please reference your
purchase invoice to identify the warranty period and starting date.

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339
Quick Start Checklist
Open the shipping box and remove
its contents, including the Rack,
the network cable, and the power
cord.
Connect one end of the provided
network cable to the back of the
Appliance and the other end to
your network connection.
Next, connect the power cable to
the back of the Appliance and plug
it into a power source.
Optionally, connect a second
network cable to the IPMI port.
This model is equipped with IPMI
functionality that can be used to
securely access the BDR remotely.
The IPMI is pre-set with a unique
username and password, which are
listed on the top cover near the left
front side of the BDR. We
recommend recording these
credentials during the installation
process.
Optionally, connect the
x360Recover Appliance to a
monitor using a VGA cable (sold
separately). You can then use the
monitor to temporarily validate a
successful boot and the IP address.

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339
Press the Power button to turn on
the Appliance.
The x360Recover backup software
is pre-installed on the BDR
Appliance and will automatically
launch once fully booted. Most
x360Recover appliances will also
automatically obtain an IP address
through DHCP.
Note: To access drives, you must
first remove the faceplate. To
remove the faceplate, pull on the
sides of the faceplate.
If you connected a monitor to the
BDR Appliance, the IP address will
display directly on the screen.
Record this IP Address.
Using a PC on the same network,
type the IP address into a Web
browser to access the Appliance
Web interface.
When fully booted, x360Recover
must be provisioned (licensed)
using the Appliance Web interface.
Your hardware setup is complete!
To start protecting systems, please
proceed with Web setup and
provisioning
(https://support.efolder.net/hc/en-
us/articles/115006751528-Replibit-
Setup-and-First-Time-Login).

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339