PEERLESS ACC951 Guide

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10
Parts List
Description Qty. Part #
Aaccessory bracket 1 201-P1746
Installation and Assembly - A/V Component Shelf Accessory
Bracket Connects DS and VPM component shelves to SA752,
SA761, SA763 or SA771 articulating wall mounts
Models: ACC951
Max Load Capacity: 30 lb (13.7 kg)*
Some parts may appear slightly
different than illustrated.
A
Before you start make sure all parts listed are included
with your product.
IMPORTANT! Read instruction sheet before you start installation and assembly.
If wall arm (sold separately) has not been
mounted, skip to step 3 on page 2.
Remove two M10 x 15 mm screws from bottom
holes of adapter plate. Loosen two M10 x 15 mm
screws from top holes of adapter plate.
*Combined load of equipment, hardware and
components is not to exceed max load capacity of
wall arm (sold separately)
Unhook universal or dedicated adapter bracket
from adapter plate.
1
2UNIVERSAL
ADAPTER BRACKET
ADAPTER PLATE
REMOVE
M10 X 15 MM SCREWS
LOOSEN
M10 X 15 MM SCREWS

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
2 of 3
Remove two M10 x 15 mm socket screws from universal adapter bracket. Hand thread two M10 x 15 mm
socket screws through top slots of accessory bracket (A) into top holes of universal adapter bracket as shown in
figure 3.1 leaving 1/8" of exposed thread as shown in detail 1.
Hook socket screws onto universal adapter bracket as shown in figure 3.2.
3
fig 3.1
fig 3.2
1/8"
DETAIL 1
A

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 3
Insert two M10 x 15 mm socket screws into bottom mounting holes of adapter plate as shown in figure 4.1.
Adjust accessory bracket (A) so bottom tray touches bottom of display and tighten all fasteners using a 6 mm
allen wrench included with wall arm.
Attach DS or VPM component shelf (sold separately) to bottom tray using M5 screws included with DS or VPM
component shelf as shown in figure 4.2.
4
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
BOTTOM TRAY
BOTTOM TRAY
M10 X 15 MM SCREWS
M5 SCREWS
fig 4.1 fig 4.2
DS OR VPM COMPONENT
SHELF (SOLD SEPARATELY)