AXIOMTEK AX93276 User manual

4 94193276010E
©Copyright 2014 Axiomtek Co., Ltd.
Version A1 January 2014
Printed in Taiwan
Quick Start
Note: When powering on PICO880 for the first time, video device must be
plugged into DisplayPort (DP). Then, after first power on, you can set
HDMI on AX93276 as primary IGFX boot display from BIOS setting
The procedures required to power on PICO880 with AX93276
installed:
(1). Require at least 60W DC power adapter. Make sure that all
necessary peripheral devices are plugged properly.
(2). Check all jumper settings and make sure they are at default
settings; especially PICO880’s JP2 (close).
(3). To ensure normal functioning, DDR3L memory module must
be installed into connector SDIMM1 on PICO880 until fully
seated.
Note: It must be DDR3L memory module.
(4). Install heatsink, heatspreader and AX93276 I/O board to
PICO880.
(5). Firmly insert the DC adapter into CN11 on PICO880.
(6). Press the system power switch (CN5) on AX93276 to start
PICO880.
AX93276 Quick Installation Guide
94193276010E 1
©Copyright 2014 Axiomtek Co., Ltd.
Version A1 January 2014
Printed in Taiwan
Checklist
I/O board x1 M3 Copper Tube x2
Quick Installation Guide x1 Screw x2
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Jumper Settings
Before applying power to the AX93276, please make sure all of the jumpers
are in factory default positions.
Jumper Description Setting
CN7B Pin 1: DCD 3-5 Close
JP1 COM1 Data/Power Selection
Default: RS-232 Data CN7B Pin 9: RI 4-6 Close
Connectors
Connector Description
CN1 Power Connector
CN2 High Speed Board to Board Connector 1
CN3 High Speed Board to Board Connector 2
CN4 LAN and USB 3.0 Connector
CN5 System Power Switch
CN6 USB 3.0 Stack Connector
CN7A~CN7B COM1 and COM2 D-Sub Connectors
CN8 HDMI Connector
CN9 System Reset Switch
D1 Power and HDD LED Indicator
AX93276 I/O Board

2 94193276010E
©Copyright 2014 Axiomtek Co., Ltd.
Version A1 January 2014
Printed in Taiwan
Board Layout
Top View
Side View
Note: Please refer to the PICO880 product information CD for the complete
user’s manual, drivers and utilities. User’s manual and related
documents are in Acrobat PDF format.
94193276010E 3
©Copyright 2014 Axiomtek Co., Ltd.
Version A1 January 2014
Printed in Taiwan
Assembly Drawing
AX93276
Heatspreader
Heatsink
PICO880