Azbil BC-R05A100 User manual

Dedicated sub-base for
the burner controller BC-R
BC-R05
User's Manual
Thank you for purchasing the BC-R05 dedicated sub-base for
the BC-R burner controller. This manual contains information
for ensuring the correct use of the dedicated sub-base for the
BC-R.
This manual should be read by those who design and maintain
devices that use the BC-R Series.
Be sure to keep this manual nearby for handy reference.
Please read the "Terms and Conditions" from the following URL
before ordering or use:
http://www.azbil.com/products/bi/order.html
Be sure that the user receives this manual before the product is
used.
Copying or duplicating this user’s manual in part or in whole is for-
bidden. The information and specifications in this manual are sub-
ject to change without notice.
Considerable effort has been made to ensure that this manual is
free from inaccuracies and omissions. If you should find an error or
omission, please contact the azbil Group.
In no event is Azbil Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
© 2014 Azbil Corporation All Rights Reserved.
SAFETY PRECAUTIONS
Safety precautions are for ensuring safe and correct use of this
product, and for preventing injury to the operator and other
people or damage to property. You must observe these safety
precautions. Also, be sure to read and understand the contents
of this user's manual.
WARNING
• Ensure you turn o the power of this device and all auxil-
iary devices when mounting, removing or connecting the
wires of this device. There is a risk of electrical shock.
• Do not touch electrically charged parts such as the pow-
er supply terminals. Doing so might result in an electric
shock.
• Do not disassemble this device.
Model number Product name Quantity Notes
BC-R05A100 Dedicated sub-base 1
CP-UM-5730E User manual 1 This document
is device is a dedicated sub-base for the burner controller BC-R
series.
issub-baseshouldbemountedonapanelorthelike.econtroller
itselfisthenmountedonthesub-base.
CAUTION
• Mounting, wiring, maintenance, inspection, calibration,
etc. should be carried out by a professional with techni-
cal training in combustion systems and ame safeguard
control devices.
• Do not install where exposed to any of the following:
• Certain chemicals or corrosive gases (ammonia, sulfur,
chlorine, ethylene compounds, acids, etc.)
• Dripping water or excessive humidity
• High temperatures
• Sustained long-term vibration
• For mounting and wiring, follow the instructions in this
user's manual or in the combustion equipment manufac-
turer's manual.
• If a protective structure of IP40 or higher rating is re-
quired, use the sideboard (sold separately), or put the
unit inside a panel that has an IP40 or higher protective
structure.
■Cautions regarding Installation
•Takespace50mmaboveandbelow,50mmtotheleandright,
and80mmto thefront,as space for removal, wiring, and
maintenance.Also,donotinstallthisdeviceclosetoelectric
powerdevicesorothersourcesofheat.
•isdevicemustinstallwithinagroundedandconductivecon-
trolpaneltoensuresafety.
•Donotpullthewiringwhileitisattachedtothedevice.Doingso
cancausefailuresoftheconnectorsorthisdeviceitself.
NOTICE
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
PLEASE CHECK
OVERVIEW
MOUNTING
50 mm 80 mm
Front
Wiring, ducts, etc.
BC-R
main unit
50 mm
50 mm
50 mm
50 mm
50 mm
1
CP-UM-5730E

(09)
1-12-2 Kawana, Fujisawa
Kanagawa 251-8522 Japan
URL: http://www.azbil.com
Specications are subject to change without notice.
2
■Installation Orientation
Attachtheunitintheorientationshownbelow.
Donotinstallitintheorientationsillustratedbelow.
■Mounting on DIN Rail
(1) Pulldownthesub-base'sDINrailclamps.
(2) AttachtotheDINrailwhilecheckingaboveandbelowthe
sub-base.
(3) Push up the DIN rail clamps to attach the sub-base (sold
separately)totheDINrail.
■Mounting in a Panel
(1) DrilltwoM4screwholesintothepanel.
(Units:mm)
(2) Usescrewstomountthesub-baseonthepanel.
(Maximumtighteningtorque:1.2N·m)
(Units:mm)
Handling Precautions
•Be sure to tighten the terminal screw (maximum tightening torque:
0.5N · m)
Item Description
Model Number BC-R05A100
Weight Approximately 200 g
Ambient
temperature
-20 to +60 °C
Sold separately Sideboard Model No.: 81447515-001
Material Denatured PPE resin (black) UL94-V0 PTI250
Material group III a
Wiring types Refer to each BC-R instruction manual
Vibration (transport) 0 to 9.8 m/s2
(10 to 150 Hz 1 octave/min 10 cycle xyz each
direction)
Shock (transport) 0 to 300 m/s2
Package drop 60 cm drop height (free drop onto 1 corner, 3
edges, 6 sides)
Display area
BC-R
main unit
BC-R
main unit
BC-R
main unit
Pull down the DIN rail
clamps
Push the DIN rail clamps
upward to x in place
Attach sub-base to DIN rail
62.5
M4
(2 locations)
EXTERNAL DIMENSION
95
62.5
105
27
17
61
64
DIN rail clamp
φ12
Knockout
hole
φ12
Knockout
hole
Sub-base
mounting
hole
Sub-base
mounting
hole
Knockout
hole
Knockout
hole
16
Sub-base
46.6
73.5
Sideboards
M3.5
(terminal screw) 30.7
23.9
φ19
Knockout
hole
φ19
Knockout
hole
SPECIFICATION
1st edition: Feb. 2014 ( K )