Aztech Technologies Pte Ltd. Kyla User manual

User Guide

Thanks for using Aztech Kyla product
If you need support or help,
please visit www.kyla.aztech.com
Smart Water
Leakage Sensor
01

Product Description
The Smart Water Leakage Sensor has a
separate design of body and sensor,efficiently
protecting the product from high humidity.
It adopts an ultra-low power consumption
circuit design for a longet battery lifespan.
The Smart Water Leakage Sensor is applicable
for hotels, basements, machine rooms,
water towers, swimming pools, kitchens,
bathrooms, and elsewhere a water overflow
detection is needed.
02
Packing List
80cm
Water Linkage
Body
Installation
Hang Board
Sensor

03
Installation Tips

04
Operation Guide
Step 1:
Download Aztech Kyla App from
Google Play/App Store
Step 2:
Login to Aztech Kyla App, then add “Smart
Water Leakage Sensor” to device list to
enable the device.
Aztech Kyla App

05
Step 3:
Remove battery insulation film to power on.

06
Step 4:
After following the App prompt, long press
the device’s networking key for 2 seconds
until the green LED light flashes. App will be
prompted once connected succesfully.

07
Step 5:
Tear off the gummed film and stick the
equipment in the required area.

08
Step 6:
Insert detector body to fixed hang board.

09
Technical
Specications
Working Voltage
DC3V (CR2032 Button Cell x 1)
Static Current
≤ 5uA
Alarm Current
≤ 30mA
Wireless Networking Distance
≤ 100m (Open Area)
Networking Mode
Zigbee Ad-Hoc
Operating Temperature
-10~50°C
Working Humidity
Max 95% RH
Product Dimensions
60 x 30 x 12.5mm
Sensor Dimension
28.3 x 26.5 x 12.2mm

10
Notes
1. Install Smart Water Leakage Sensor at
easy linking area.
2. Don’t install Smart Water Leakage Sensor
at areas where rainwater, lampblack,
water vapor, etc., usually collect.
3. Don’t install Smart Water Leakage Sensor
at water immersion position.

©2018 Aztech Technologies Pte Ltd.
All rights reserved.