B-Tech BT8385-CTW User manual

www.btechavmounts.com
B-TECH AV mounts
BT8385-CTW
COLUMN-TO-WALL MOUNTING KIT
Use with a bt8385 column
PARTS LIST
ITEM DESCRIPTION QTY
1
2
3
4
5
6
7
4AF x L55mm HEX KEY
3
M6 x 12mm SCREW
2
WALL PLATE
1
BASE PLATE
1
M8 x 50mm COACH SCREW
4
N°.10 x 50mm WALL PLUG
4
M8 T1.5mm METAL WASHER
4
1
1
2
46
5
7

2
1.
Installation Instructions
INSTALLATION SAFETY INSTRUCTIONS
B-Tech AV Mounts, it’s distributors and dealers are not responsible for damage or injury caused by improper installation,
improper use, modications, installations over the specied weight capacity and/or failure to observe these safety
instructions. In such cases, any warranty will expire.
It is recommended that this product should only be installed by a qualied professional / installer.
B-Tech AV Mounts does not claim any liability for any diculties that may arise from the interpretation contained
in these instructions. Failure to mount this product correctly may lead to serious injury and/or death.
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.
In the event of missing and/or defective parts, or technical questions, please contact an authorised dealer.
Pay careful attention to where this product is located, some locations are not suitable for installation. For indoor use only.
It is recommended that periodic inspections of the product are made as frequently as possible to ensure that safety is maintained.
Please keep these instructions for future reference.
CAUTION:
This product is intended for use only with the
maximum weights indicated. Use with equipment heavier than the
maximum indicated may result in instability causing possible injury.
ATTACH WALL PLATE
Attach item 1 to the top of a BT8385 column using item 3.
BT8385
COLUMN
BT8385-RTC
1
1
3
7
3

3
2.
6.5mm
150mm
60mm
WALL
TOP VIEW
FIX FLOOR PLATE TO FLOOR
Fix item 2 to oor (xings not included).
Note: Fixing points are 60mm away from wall.
CONCRETE FLOOR
GROUND ANCHOR
2
GROUND ANCHORS
(not supplied)
2
2
FLOOR

4
3.
GUIDE PINS
COLUMN
WALL
MARK WALL FIXING HOLES
Using the guide pins, place the column onto item 2.
Mark the 4 xing holes from item 1 onto the wall.
2
1

5
4.
DRILL HOLES AND INSERT WALL PLUGS
Remove column and drill marked holes.
Insert 4 x item 6 (Not required for stud/wood walls).
WALL
6
MASONARY WALL
Use a
10mm Masonary Drill Bit
or a
6mm Wood Drill Bit

6
5.
WALL
2
4
5
1
MOUNTING RAIL
Place the column onto item 2 and x item 1 to the wall using items 4 & 5.
Note: For ease of installation, the mounting rail can be assembled to the
rail mounting plate before xing the column to the wall.
FIX COLUMN TO WALL

PRODUCT DIMENSIONS
PLEASE KEEP THIS FOR FUTURE REFERENCE
BT8385-CTW
7
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
TOP VIEW
TOP VIEW
WALL PLATE
BASE PLATE
SIDE VIEW
SIDE VIEW
FRONT VIEW
BACK VIEW
112mm
60.3mm
6.5mm
60mm
3mm
180mm
15mm
50mm 50mm 50mm
20mm
8.5mm
43mm
6.5mm
9mm
51mm
66mm
150mm
6mm
20mm
180mm
100mm
63mm
79.4mm

www.btechavmounts.com
B-TECH AV mounts
AMA-BT8385-CTW-V1-1119-110 MADE IN VIETNAM
©2019 B-Tech International Design & Manufacturing Ltd. All rights reserved.
B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd.
B-Tech AV Mounts, the B-Tech logo and Mode-AL are registered trade marks.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
CONTACT:
[email protected]