B-Tech System 2 BT7551 Instruction Manual

B-TECH AUDIO VIDEO MOUNTS
www.btechavmounts.com
CONTENTS
INSTALLATION TOOLS REQUIRED
FEATURES
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions........................................................................................................................5
Product Dimensions................... ........................................................................................................7
B-Tech Contact Details.......................................................................................................................8
• Fits 75 x 75mm and 100 x 100mm VESA mounting patterns
• Maximum load: 23kg (51lbs)
• Tilt: +/-10°
• Swivel: 360°
• Screen levelling: 360° Rotation
• Cable management
• Keyholes mounting for easy hook-on installation
• Must be used with B-Tech 50mm (2") extension poles
(extension poles sold separately).
• All mounting hardware and fixings included
DrillPencil
BT7551
SINGLE FLAT SCREEN MOUNT
FOR 50mm (2”) POLES
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS PARTS LIST FOR FUTURE REFERENCE
Drill bit
Flathead & crosshead
screwdriver
10º
10º
SCREEN
VESA
100
23kg
(51lbs)

INSTALLATION SAFETY INSTRUCTIONS
2
CAUTION:Thismount is intended for
use only with the maximum weights indicated.
Use with flat screen heavier than the maximum
indicated may result in instability causing possible injury.

3

BT7551
PARTS LIST
4
Suitable for loads
up to
23kg (51lbs)
12
3
4
5
6
PLEASE KEEP THIS FOR FUTURE REFERENCE
REF PART NAME QTY
1 FLAT SCREEN MOUNT 1
1 M8 x 60mm SCREW 2
3 M10 x 10mm GRUB SCREW 2
4 M4 x 12mm SCREW 4
5 5mm ALLEN KEY (FOR PARTS 2 & 3) 1
6 S13mm SOCKET WRENCH 1

INSTALLATION INSTRUCTIONS
5
Attach the flat screen mount (Part 1) onto a BT7850 - ø50mm extension pole (not supplied).
Fit the M8 x 60mm screw (Part 2) and M10 x 10mm grub screws (Part 3) using the provided
5mm Allen key (Part 5).
3
1
BT7850
Extension
Pole
(not supplied)
EXAMPLE INSTALLATIONS
BT7822 Ceiling Bracket
(not supplied)
BT7850 Extension Pole
(not supplied)
BT7551 Flat Screen Mount
(supplied)
5
2
CEILING
DESKTOP
BT7822 Bracket
(not supplied)
BT7551 Flat Screen Mount
(supplied)
1
BT7850 Extension Pole
(not supplied)

6
Rotation
360º
Rotation
360º
Tilt
+10 / -10º
Tension
Adjustment
Mount the screen using the keyole fixings (Suitable for screens with VESA 75 x 75mm or
100 x 100mm fixings).
Insert halfway 2pcs M4 x 12mm screws (Part 4) into the upper
VESA fixings on rear of screen with 6mm overhanging.
Mount screen onto VESA plate (Part 1). This procedure may require 2 persons.
Attach the remaining 2pcs M4 x 12mm screws
into the lower VESA fixings holes of the screen
and then tighten all screws, securing screen to
mount.
If required, position the angle of the
screen
by adjusting the mount
tension
using the supplied S13mm
socket wrench (Part 6) to adjust
resistance.
Clockwise to increase tension
Counter-clockwise to decrease
tension.
VESA PLATE
6
1
4
4
TIGHTEN
6mm
2
3 4

BT7551
PRODUCT DIMENSIONS
7
100mm
(3.94”)
118.5mm
(4.67”)
75mm
(2.95”)
100mm
(3.94”)
75mm
(2.95”)
125.7mm
(4.95”)
227mm
(8.94”)
35mm
(1.38”)
50mm
(1.97”)
42mm
(1.65”)
89.6mm
(3.53”)
60.6mm
(2.39”)
These instructions are intended as a guide only and B-Tech accepts no
liability for the accuracy of the information
286.3mm
(11.27”)

IP-BT7551-V1-PROBX-260713-44 MADE IN CHINA