B-Tech BT8385-130 User manual

www.btechavmounts.com
B-TECH AV mounts
BT8385-130
1.3m Column
PARTS LIST
4
3
7
1
2
10
9
ITEM DESCRIPTION QTY
1 1.3M COLUMN 1
2
COLUMN REAR COVER 1
3
METAL END CAP 1
4
M6 x 12mm HEX SCREW
2
5
COVER STRIP
2
6
RUBBER RING
7
4
84
9
10
4AF HEX KEY
1
3AF HEX KEY
1
SQUARE NUT
M6 x 12mm GRUB SCREW
4
56
8

2
1.
Installation Instructions
INSTALLATION SAFETY INSTRUCTIONS
B-Tech AV Mounts, it’s distributors and dealers are not responsible for damage or injury caused by improper installation,
improper use, modications, installations over the specied weight capacity and/or failure to observe these safety
instructions. In such cases, any warranty will expire.
It is recommended that this product should only be installed by a qualied professional / installer.
B-Tech AV Mounts does not claim any liability for any diculties that may arise from the interpretation contained
in these instructions. Failure to mount this product correctly may lead to serious injury and/or death.
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.
In the event of missing and/or defective parts, or technical questions, please contact an authorised dealer.
Pay careful attention to where this product is located, some locations are not suitable for installation. For indoor use only.
It is recommended that periodic inspections of the product are made as frequently as possible to ensure that safety is maintained.
Please keep these instructions for future reference.
CAUTION:
This product is intended for use only with the
maximum weights indicated. Use with equipment heavier than the
maximum indicated may result in instability causing possible injury.
6
5
6
5
REAR
REAR
FRONT
TOP
BOTTOM
2
1
FIX REAR COVER TO COLUMN (OPTIONAL)
Place item 2 into the back of item 1.
Use items 5 & 6 at the top and bottom of the column slot to secure rear cover.
9
6
5
2

3
2.
3
4
1
TOP
ATTACH END CAP
Fix item 3 onto the top of item 1 using item 4.
3.
ATTACH COVER STRIPS
After display has been mounted to installation
cut item 8 down to size and insert into the front
and back of item 1.
10
8

www.btechavmounts.com
B-TECH AV mounts
AMA-BT8385-130-V1-1119-104 MADE IN VIETNAM
BT8385-130
1.3M COLUMN
PRODUCT DIMENSIONS
©2019 B-Tech International Design & Manufacturing Ltd. All rights reserved.
B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd.
B-Tech AV Mounts, the B-Tech logo and Mode-AL are registered trade marks.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
CONTACT:
[email protected]
1302mm
3mm
180mm
798mm
90mm
60.8mm
FRONT VIEW
83.4mm
SIDE VIEW
TOP VIEW
360mm
90mm
REAR VIEW
87.4mm
112mm
79.5mm