BabyBliss 5616BU User manual

Model 5616BU
ITALIAN AC DRYER 2400

ITALIAN AC DRYER 2400
Italian craftsmanship, performance and style
This 2400W Italian made dryer has a high power AC motor for super
fast drying results. Its superior build quality and sleek, elegant design
gives easy handling and long lasting reliability.
Designed to exact professional standards, this is a genuine salon grade
dryer that gives a true salon nish.
FEATURES
• 2400W
• Italian made, high power AC motor for super fast drying
• Sleek, elegant design for easy handling
• Superior build quality for long lasting reliability
• Ultra slim concentrator nozzle for a smooth nish
• Ionic technology for smoothness and shine
• Heat-balancing ceramic technology
• 3 heat / 2 speed settings
• True cold setting
• 2.7m salon length power cord
• Hanging loop
• Removable rear lter
• Thermal brush
• 5 year guarantee
SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction booklet. Please retain for reference.
• WARNING: Polythene bags over a product may be
dangerous. To avoid danger of suffocation, keep this
wrapper away from babies and children. This bag is
not a toy.
•UK Only: This appliance must not be used in the
bathroom. If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous
even if the appliance is switched off. For additional
protection the installation of a residual current device
(RCD) with a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
• WARNING! Do not use this appliance near water
contained in basins, bathtubs or other vessels.
• Do not immerse the appliance into water or other
liquids.
• Do not use this appliance in the bathroom.
• Never look directly into the barrel of the hairdryer
when it is switched on.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to UK
After Sales Service section for further information).
• Do not use the appliance if the lead is damaged. In

the event of lead damage contact the Conair Customer
Care Line (refer to UK After Sales Service section for
further information).
• Do not leave the appliance unattended when switched
on or plugged in.
• The hairdryer is equipped with a safety thermostat.
In case of overheating, the dryer will run hot and cold
intermittently. In the event of this happening turn the
dryer off, unplug from the mains and allow to cool for
10-15 minutes before using again. Ensure that the rear
air lter is clear of hair and other debris. Then plug in and
turn on the hairdryer again. If it continues to overheat
(e.g. element glows red intermittently) turn off, unplug
from the mains and contact the Conair Customer Care
Line (refer to UK After Sales Service section for further
information).
• Take care that the rear air lter does not become
blocked when in use. Ensure the rear lter is clear of
hair and other debris before use.
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the ears, eyes, face and neck.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Careful adult supervision is required when this appliance
is used on or near children. Do no use on very young
children.
• This appliance should not be used, cleaned or
maintained by children. Keep out of the reach of
children.
• Always ensure that this appliance is kept out of the
reach of children at all times, particularly during use
and whilst cooling.
• Allow appliance to cool before storing away.
• After use do not coil the lead around the appliance as
this may cause damage to the lead. Instead coil the
lead loosely by the side of the appliance.
• This appliance complies with the requirements of
Directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Electrical Safety of Domestic
Appliances).
Ionic Technology
Many aspects of modern living, including air conditioning, contact with
man-made bres and air pollution contribute to a build-up of static
electricity in the hair. Even brushing and towel drying the hair can
increase these levels, causing the surface of the cuticle to become
rough. Consequently, hair may have a dull appearance. High levels
of static charge cause hair to become “y-away” and difcult to style.
The ion generator produces a stream of negative ions which act to
neutralise the static charge, smoothing the scales on the cuticle for
shiny, smooth and manageable hair.

INSTRUCTIONS FOR USE
Heat / Speed Settings
There are 3 heat and 2 speed settings including a true cold setting.
Use the high heat and high speed settings for initial drying and use the
low heat and low speed settings as the hair begins to dry, for scrunch
drying and styling.
Cold Setting
Use the cold setting on warm hair to rapidly cool the hair and set the
style in place for a lasting effect.
General
• Towel dry and detangle hair.
• Plug the appliance into a suitable mains socket.
• Select the required heat and speed settings.
• After use, unplug the hairdryer from the power point and allow to cool
down before storing away.
How to use the ultra slim concentrator nozzle
The dryer is supplied with an ultra slim concentrator nozzle. Use the
nozzle to direct the airow down the hair section, to smooth the cuticle
for precise blow-drying when creating straight styles.
STYLING TIPS
Body and Volume
To help create extra body and volume in the hair, lean forward so the
head is upside down when drying. Direct the airow towards the roots
for maximum lift. When the hair is dry, brush back into the required
style.
Straightening
To create a smooth straight look, rst divide the hair into sections.
Attach the ultra slim concentrator nozzle, then using the thermal brush,
hold the hair taut and direct the airow along the hair section, rolling
the ends under as you dry.
Making Waves
To create natural looking tousled waves, position the head upside
down. Using the dryer without the nozzle grasp hair at the roots and
scrunch between nger tips whilst drying. When dry, move the hair
back into the required position and arrange hair for a natural tousled
look.
CARE OF YOUR HAIRDRYER
To keep your hairdryer in the best possible condition, please follow the
steps below:
Cleaning the filter
• Ensure the appliance is switched off, unplugged and cool.
• Holding the handle of the appliance rmly, turn the rear lter to the
left and pull away to remove.
• Using a soft brush, clean any hair and other debris from the lter.
• To replace the rear lter, align the groves and turn to the right to x
back into position.
General
• To clean the outside of the hairdryer, wipe with a damp cloth. Make
sure no water enters the hairdryer and is completely dry before use.
• Do not wrap the lead around the hairdryer, instead coil the lead
loosely by the side of the dryer when storing away.
• Do not use the hairdryer at a stretch from the power point.
• Always unplug after use.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 5 years.
This guarantee covers defects under normal use from date of purchase
and ceases to be valid in the event of alteration or repair by unauthorised
persons. If the appliance does not perform satisfactorily due to defects
in materials or manufacture, it will be repaired or replaced through
Conair UK After Sales Service. The Conair Group Ltd reserves the right
to amend terms and specications without prior notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or email
your enquiry to [e-mail].
If you should need to return your appliance to us please send it to the
following address:
Customer Care Centre
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof
of purchase and details of the fault.
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L.
• Neither core should be connected to the earth terminal of a three pin
plug marked with the letter E or .
This appliance comes tted with a British Standard 13 amp type plug
and a 10 amp fuse. It is important to always use a 10 amp fuse, should
its replacement be required. If any other type of plug is used, a 10 amp
fuse must be tted at the distribution board.