
•Compact & lightweight
•Rapid detection of changing
CO2levels
•Maintenance free dual wavelength
infrared CO2sensor
•Visual and audible alarms
•8 to 10 hours use on a full charge
•Quick, intelligent charge In less
than two hours
•Automatic datalogging provides
complete CO2exposure record
•Two way IrDA communication link
•Easy to read digital display
•Easy calibration in fresh air
•Simple to use
Range* 0-50,000 ppm CO2
0-5% CO2
Resolution 100 ppm (0.01%CO2)
Response Time T90<10 seconds @ 5,000 ppm and 10,000 ppm
Audible Alarm 85dB @ 0.5 meters
Case Seal NEMA 12 (IP65); dust and water resistant
Power Source Nickel-metal hydride battery providing up to 10 hours of continuous use
Operating Temp. 32°F to 104°F (0°C to 40°C)
Relative Humidity 0 to 99% (non-condensing)
Dimensions 5.5"L x 2.6"W x 0.8"H
(140mm x 66mm x 20mm)
Weight 7 ounces (200 grams)
Construction Hi Impact ABS case
PART NO. D E S C R I P T I O N PART NO. D E S C R I P T I O N
19-7101 CO2Monitor 2800
19-3301 IrDA Interface/Software
19-3302 In-car charger
19-3303 Earphone
19-3304 Protective Boot
19-3305 Calibration Cup
51-2978 Calibration Kit
54-0600 Calibration Gas (340ppm CO2)
Features & Benefits
Specifications
Ordering
Information
Bacharach is a registered trademark of Bacharach, Inc.
©September, 1996, Bacharach, Inc., all rights reserved. All information herein is subject to verification. Manufactured in the USA.
Product Bulletin-5208 10/98 10M
World Headquarters: 625 Alpha Drive, Pittsburgh, PA 15238 phone: 1-800-736-4666 website: www.bacharach-inc.com
*Factory or user-selectable with optional software