5
8.2 ℃/℉:Get into parameter setting state, the location of speed icon display symbol CF,
press the UP/DOWN button rotate display the symbol ℃/℉.
8.3 Light sensitive : Get into parameter setting state, the location of speed icon display
symbol bL0,pressUP/DOWN button display symbol 0~5.0indicate automatic
headlight/backlight OFF, 1~5 indicate automatic headlight/backlight ON. 1indicates the
brightest on(auto turn on the backlight at bright environment), 5indicates the darkest
on(auto turn on the backlight at dark environment).
8.4 Backlight brightness : Get into parameter setting state, the location of speed icon
display symbol bL1,pressUP/DOWN button display symbol 1~5 to change the
brightness of the backlight.
8.5 Buzzer : Get into parameter setting state, the location of speed icon display symbol bEP,
press the UP/DOWN button rotate display symbol 0/1,0indicates buzzer off, 1indicates
buzzer on.
8.7 Auto off delay time : Get into parameter setting state, the location of speed icon display
symbol OFF,presstheUP/DOWN button display symbol 1~9, represent automatically
shutdown delay time (minutes), default value is 5.
8.8 Power display : Get into parameter setting state, the location of speed display symbol
Pod,pressUP/DOWN button display symbol 0/1, represent whether to show the
power indicate on LCD.
8.9 Maintain reminded : Get into parameter setting state, the location of speed icon display
symbol nnA(ma), press the UP/DOWN button rotate display symbol 0/1,0represent
maintain reminding off, 1represent maintain reminding on.
8.10Wheel diameter : Get into parameter setting state, the location of speed icon display
symbol Wd,presstheUP/DOWN button can change this parameters as follows,
16/18/20/22/24/26/700C/28/29. This is represent the wheel diameter, in units of inches.
8.11Battery parameter : Get into parameter setting state, the location of speed icon display
symbol bU0,presstheUP/DOWN button can change this parameters as follows,
24/36/UbE. This is represent the Battery rated voltage, UbE means user define voltage.
8.12Password : Get into parameter setting state, the location of speed icon display symbol
PSd, remind to input passwords, press UP/DOWN buttons to setup password value
(0~9), press LEFT/RIGHT buttons to switch the password items. Passwords are 4 digit,
default password is "1919". Press POWER button when password adjustment is
completed. Meter will back to the Voltage set item if the password is wrong. Correct
password will enter the Speed limit set item.
8.13 Speed limit set : The location of speed display symbol SPL, the location of mileage
display speed limit value, default value is 25km/h. Press UP/DOWN buttons to adjust
the speed limit value, the minimum value is 10km/h, the maximum value is 99km/h.
