Baja motorsports DR125 Manual

1. Remove cardboard carton
from metal frame.
1
2. Remove wire straps
and foam covering from
handlebar.
DR125 Set-up Instructions
Removal from crate

2
3. Remove wire straps from front forks and rear swing arm.
4. Remove bolts from both sides of metal frame.
Remove foam covering and tool kit 5. Remove bolts holding metal
frame to handlebar bracket.
Tool Kit
Removal from crate

6. Install handlebars by handlebar clamp provided.
Torque bolts to 25Nm (18.5ft.lb.)
3
Handlebar Assembly

7. Fill engine with correct amount of oil. Refer to owners
manual for oil types and quantity.
8. Fill gas tank as specied in
owners manual.
Oil Cap
9. Refer to owners manual for
proper starting instructions.
!!WARNING!!
This motorcycle may be shipped with packing oil
in the engine. This oil should be drained and
replaced with new engine oil as described in the
owners manual. Never attempt to start the
engine without rst replacing the engine oil with
the proper amount and grade as described in the
owners manual.
4
Gas and Oil