Operating Instructions
1. Standard Time Mode
1) After power on, the default display is d1 Time/Temperature mode.
2) Press “UP” key to switch between Degree Fahrenheit and Celsius.
3) Press “DOWN” key to turn ON/OFF Key tone, and there will be an ON/OFF icon on
the screen respectively.
4) Press “ALARM” key to turn ON/OFF alarm function, switch between AL- -and AL: ON
(AL- -means alarm function turned off, while AL: ON means turned on). When there is
a bright dot between the time and temperature display, it indicates that the alarm clock
is turned on.
5) Press “SET” key to switch display between d1/d2 modes: d1 means Time/Temperat-
ure display all time; D2 means skipping display mode (skip between10 seconds Time
/Temperature display by turns and 5 seconds Year/Month/Date display).
6) On time display mode, touch the “Snooze/Dimmer” key to adjust the LED brightness.
You can select from 3 level of brightness; hold and press the “Snooze/Dimmer” key
for above 5 seconds will turn on/off the LED display, while the clock is still working.
2. Time Setting
1) Press and hold “SET” key for 3 seconds to enter into time setting mode. The figure to
be set will be flashing. Press “SET” key to confirm and move to next setting. The set-
ting order is: Year->Month->Date->12H/24H->Hour->Minute-> confirm and exit sett-
ing.
2) Press “UP” or “DOWN” key to change the setting when the figure is flashing. Press
and hold “UP” or “DOWN” key, the number will move forward or backward by 8 steps.
3) When time mode (12H/24H) is flashing, press “UP” or “DOWN” key to switch the dis-
play mode. For 12H display mode, there will be a bright dot at the upper left corner
to indicate PM time.
5) If there is no operation for 15 seconds, it will automatically save setting and exit to
time mode.
3. Alarm Setting
1) Hold and press “ALARM” key for 3 seconds to enter into alarm setting mode. The
figure to be set will be flashing Press “ALARM” key to confirm and move to next sett-
ing. The setting order is: Alarm A1->Hour->Minute->Weekday (Mon. to Fri or Mon. to
Sun.)->Alarm A2->Hour->Minute->Weekday (Mon. to Fri or Mon. to Sun.)->Alarm A3
->Hour->Minute->Weekday (Mon. to Fri or Mon. to Sun.)-> confirm and exit setting.
2) Press “UP” or “DOWN” key to change the setting when the figure is flashing. Press
and hold “UP” or “DOWN” key, the number will move forward or backward by 8 steps.
3) When the figure is flashing, press “UP”or“DOWN”key to turn on alarm (A1on）or turn
off (A1--). For Alarm A2 and A3, please repeat the above steps for setting.
4) When the weekday flashes by “1-7” or “1-5”, press “UP” or “DOWN” key to switch.
5) If there is no operation for 15 seconds, it will automatically save setting and return to
time mode.
Page5
