Baldwin Boxall BVSMPM User manual

Baldwin Boxall Communications Ltd.
Wealden Industrial Estate, Farningham Road
Crowborough, East Sussex, TN6 2JR
Telephone: [phone]
Fax: [phone]
Website: www.baldwinboxall.co.uk
Email: [e-mail]
BVSMPM/LT
Issue 2 06/07/2017
ECR 3252
BVSMPM / BVSMPMLT
Installation Manual

-2- BVSMPM/LT Issue 2 ECR 3252
BVSMPM / BVSMPMLT Mains Only Power Supply
Introduction
The BVSMPM contains two independent PSU modules and can power either two BV225, two
BV125D or two BV050Q power amplifier modules.
The BVSMPMLT contains a single PSU module and can power either one BV225, one
BV125D or one BV050Q power amplifier.
Both the BVSMPM and BVSMPMLT employ “switch mode” techniques that improve
efficiency, reduce unwanted heat dissipation and weight.
An extra fused output is provided to power a mixer or auxiliary circuits. All these outputs are
provided by a 9 way crimp connector plug and socket.
Protection
The power supplies have over Current and over Voltage protection circuits on all DC outputs
to ensure system reliability.
BVSMPM / BVSMPMLT SPECIFICATIONS
BVSMPM
BVSMPMLT
AC supply input Voltage
200V – 250V 50 – 60Hz
200V – 250V 50 – 60Hz
Maximum power consumption:
700VA
350VA
Maximum inrush current @ 230V:
18A
9A
DC output 1 to amplifier 1:
31V @ 12A
31V @ 12A
DC output 2 to amplifier 2:
31V @ 12A
--
DC output 3 auxiliary mixers etc:
31V @ 2A
31V @ 1A
Fuse protection:
AC supply (5 x 20mm):
2 x 3.15A(T)
1x 3.15A(T)
Aux output (self-resettable):
1.1A
1.1A
Front panel indicators:
DC Output OK
Output 1 & Output 2
Output 1
Terminations:
AC supply input:
IEC 6A filtered connector
DC outputs:
9-pin crimp terminated connector

-3- BVSMPM/LT Issue 2 ECR 3252
Front Panel View
BVSMPM Rear Panel View
BVSMPLT Rear Panel View