B&C Speakers 6 PEV 13 User manual

High efficiency 6" cone midrange, ideally suited for three and
four way systems. ery smooth response from 400 Hz to 8 kHz.
An aluminium phase plug increases axial sensitivity and
controls high frequency dispersion.
Specification
Nominal Diameter 170 mm (6.5 in.)
Nominal Impedance 8 Ω
Minumum Impedance 6 Ω
Power Handling
(300-3000 Hz)
Nominal1120 W
Continuous Program22 0 W
Sensitivity (1W/1m)399 dB
Frequency Range 150-8000 Hz
Voice Coil Diameter 38 mm (1.5 in)
Winding Material Aluminium
Former Material Fiber Glass
Winding Depth 7 mm (9/32 in)
Magnetic Gap Depth 6 mm (1/ in)
Flux Density 1. T
Thiele & Small Parameter 4
Fs 126 Hz
Re 5.2 Ω
Qes 0.39
Qms .6
Qts 0.36
Vas 6 dm3(0.21 ft3)
Sd 132 cm2(20.5 in2)
η03%
X max ± 0.6 mm
X var ± 1.5 mm
Mms 6 g
Bl 8.2 T·m
Le 0.6 mH
Mounting and Shipping Information
Overall Diameter 187 mm (7. in)
Bolt Circle Diameter 172 mm (6.7 in)
Baffle Cutout Diameter 1 5 mm (5.7 in)
Depth 78 mm (3.1 in)
Flange and Gasket Thickness 11 mm (7/16 in)
Net Weight (1 unit) 2. kg (5.3 lb)
Shipping Weight ( units) 10.9 kg (2 lb)
Shipping Box ( units) 05x225x210 mm
(15.9x8.8x8.3 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor). Power
calculated on rated minimum impedance. Loudspeaker in free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 8000 Hz.
Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
6 PEV 13 |Midrange
Speakers HPL Coaxials HF Compression drivers Horns