B&C Speakers Midrange 6 PE 13 User manual

Speakers Coaxials HF Compression drivers Horns
1
B&C
High efficiency midrange, recommended
in such application as multi-way systems
from 600 Hz. to 5 kHz.
Specifications
Nominal Diameter 170 mm. (6.5 in.)
Nominal Impedance 8 Ω
Minumum Impedance 5.8 Ω
Power Handling
( 00- 000 Hz)
Nominal1120 W
Continuous Program2 240 W
Sensitivity (1W/1m) 98 dB
Frequency Range 150-8000 Hz
Voice Coil Diameter 8 mm. (1.5 in.)
Winding Material Aluminium
Former Material Fiber Glass
Winding Depth 7 mm. (9/ 2 in.)
Magnetic Gap Depth 6 mm. (1/4 in.)
Flux Density 1.4 T
Thiele Small Parameters4
Fs 117 Hz.
Re 5.2 Ω
Qes 0.48
Qms
Qts 0.42
Vas 5 dm. (0.17 cu. ft.)
Sd 1 2 cm.2(20.5 sq. in.)
η01.6 %
X max ± 0.6 mm.
Mms 9 gr.
Bl 8.5 Tm
Le 0.6 mH
Mounting and Shipping Informations
Overall Diameter 187 mm. (7.4 in.)
Bolt Circle Diameter 172 mm. (6.7 in.)
Baffle Cutout Diameter 145 mm. (5.7 in.)
Depth 78 mm. ( .1 in.)
Flange and Gasket Thickness 11 mm. (7/16 in.)
Net Weight (1 unit) 2. Kg. (5.1 lb.)
Shipping Weight (4 units) 10.5 Kg (2 .1 lb.)
Shipping Box (4 units) 405x225x210 mm
(15.9x8.8x8. in.)
1 2 hours test made with continuous pink noise signal (6 dB crest factor). Power
calculated on rated minimum impedance. Loudspeaker in free air.
2 Power on Continuous Program is defined as dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.8 V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 8000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
6 PE 13 |Midrange