B&C Speakers MF Drivers DCM50 User manual

DCM50 MF Drivers
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
160 W continuous program power capacity
2” horn throat diameter
400 – 10000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
Specifications
Throat Diameter (1) 50 mm (2 in)
Nominal Impedance 8 ohm
Minimum Impedance 8 ohm
Nominal Power Handling (2) 80 W
Continuous Power Handling (3) 160 W
Sensitivity (1W/1m) (4) 108.5 dB
Frequency Range 0.4 -10 kHz
Recommended Crossover (5) 400 Hz
Voice Coil Diameter 51 mm (2 in)
Winding Material Aluminium
Inductance 0.18 mH
Diaphragm Material Composite
Flux Density 2.1 T
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter 152 mm (6 in)
Depth 108 mm (4.25 in)
Net Weight 3.2 kg (7 lb)
Shipping Weight 3.4 kg (7.5 lb)
Shipping Box 170x170x140 mm
(6.7x6.7x5.5 in)
1Driver mounted on 320 Hz exponential horn
22 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
512 dB/oct. or higher slope high-pass filter.