B&G FLEX-A-LITE 2600 User manual

User Manual
FLEX-A-LITE
2600 FOGGER
SAFETY
Please ensure you have read and fully understood the safety precautions
before operating this appliance. Instructions for use of this product will
vary depending on chemical applications. Always read the product label
when preparing your solution.
Always comply with any requirements for Personal Protective
Equipment (PPE) as required by the formulation label.
This appliance is to be kept out of reach from children. However, it can
be used by children aged 8 years and above, as well as persons with
reduced physical, sensory or mental capacities or lack of experience
and knowledge, provided they have been given supervision or
instruction concerning use of the appliance in a safe way, and
understand the hazards involved.
Children should not play with, clean, or maintain the appliance.
Users should hold the appliance and manually cover the designated
fogging areas.
The fogger should not be left operating unattended, and for the most
ecient application it should not be left stationary.
This fogger can be used with water-based, oil-based, and
solvent-based formulations.
Never direct fogging at live electrical items, animals, humans, etc.
Remember to cover aquariums before fogging takes place.
If the use of an extension lead is required, ensure it is correctly rated
for the product and is grounded. Only use an extension lead which is
properly rated for voltage, current, length, and which is free from nicks,
cracks, and other signs of prior abuse. Replace damaged or worn
electric leads immediately.
Do not use a fogger that is broken or damaged in any way. Do not alter
the fogger by adding or removing parts.
Do not restrict the motor blower air intake area.
•
•
•
•
•
•
•
•
•
DESCRIPTION
This heavy-duty fogger is ideal for pest management and disinfection
because of it’s compact size, stability, and capacity. The droplet size varies
from a power-mist to ULV, depending on the flow rate and formulation, and
is easily selected with the adjustment knob on the nozzle (see table below).
Droplet spray extends 13 feet (4 meters) from the nozzle and the flexible
hose directs the fog for precision application.
BEFORE USE
Calibrate
Turn the adjustment knob (at the end
of the nozzle) to the right until
closed/off.
Push down on base of knob and turn
to align the point of the knob with
groove on the nozzle (Figures 1 and 2).
Release base – this will set the point.
Re-adjust to zero with every use.
•
•
•
•
Figure 2
Figure 1
Placement
Never place fogger directly on floor.
Elevate to keep dust and moisture out of fogger.
Do not operate fogger in enclosed or small areas for more than 30
minutes.
•
•
•
Fill
Do not add more than 1.5 gallons (5.7
liters) liquid total to the tank.
Do not mix chemical in the tank;
pre-mix and then add to the tank.
Both water-based and oil-based
formulations are appropriate.
Mix all chemicals according to label
directions.
•
•
•
•
1bgequip.com

¼ Turn
½ Turn
¾ Turn
1 Turn
Setting
Fog - Tiny droplets, not visible
Fog - Tiny droplets, not visible
Mist - Larger droplets, visible
Mist - Larger droplets, visible
Description
40
44
52
56
Droplet Size
(VMD, in
microns)
0.33/9.76
0.75/22.19
1.2/35.50
2.5/73.96
Flow Rate
(oz/ml per min)
PARTS AND PART LIST
Figure 4
CARE, MAINTENANCE, AND REPLACEMENT
PARTS
Always empty and flush the tank and hose after each use; never leave
chemicals in machine for extended periods of time.
Inspect spray hose and electric cord for wear or damage.
Protect nozzle when not in use.
Clean the filters on the bottom plate of the fogger regularly by
removing and gently rinsing with clean warm water, then allowing to
fully dry before reinserting. Replace when damaged as these protect
the motor.
•
•
User Manual
FLEX-A-LITE 2600 FOGGER
129103230 1608003992
1608003993
1608004427
1208001339
29103240
95151362
29103225
Clip
Spring
Venturi
Knob assembly
2
3
4
5
6
7
8
Number Description Order
Number
(US)
Order
Number
(EU)
29103220 1608003991
1208001340
1608004029
1608004000
29103235
29108215
29103292
O-Ring
Sleeve
Screw
Screw
9 29103297 1608004003
1608004005
1608004001
29103299
29103293
Hex nut
Spacer
Nozzle
10
11
13
14
29103294 1608004002
120800138129108247
Screw
Hose assembly
18” (46 cm)
160800388722071433Spring clamp12
OPERATION
Follow all “Before Use” instructions above.
Connect unit to the designated electrical
supply:
•Do not connect 120V units to 230V
power,
•Do not connect 230V units to 120V
power.
•If using an extension cord, ensure it’s
3-prong and grounded.
Turn on fogger by moving switch to “on.”
1.
2.
3.
4.
5.
6.
Figure 3
Turn the adjustment knob from ¼ of a turn to fully open depending on
what droplet size is appropriate for your application (Figure 3). Note
that droplet size varies with temperature and viscosity of the material
being dispensed.
Direct fog to treatment areas using the flexible hose.
IMPORTANT When application is finished, first close adjustment knob
and second turn off power (Figure 4). Only then, open tank cap. Failure
to follow this sequence can result in liquid dripping into the hose and
destroying the motor.
2bgequip.com

User Manual
FLEX-A-LITE 2600 FOGGER
14 120800138729108305Hose assembly
36” (91 cm)
14 120800138629108268
Hose assembly
48” (122 cm)
15 29108123 1608004014Spacer
Motor guard
(includes air filter) 29108105 1208001356
Screw 29108110 1608004012
95122955 1208001550
95122954 1208001549
Tank Grey
Tank Lt Blue
Dome Grey 110V 95122949 1208001547
34
35
36
36
37
29 Grommet 29108156 1608004021
Open
Item #18
EMI Filter 62047-1 1208002361
Motor 110V 29108190 1208001367
Motor 230V 29108195 1208001372
30
31
32
33
33
As the colors of the wire in the mains lead of this appliance may not
correspond with the color marking identifying the terminals on your plug,
proceed as follows:
The wire which is colored BLUE must be connected to the terminal
which is marked with the letter N.
The wire which is colored BROWN must be connected to the terminal
which is marked with the letter L.
The wire which is colored YELLOW & GREEN must be connected to the
terminal which is marked with the letter E or the symbol .
•
•
•
Wiring Instructions (only for United Kingdom /
European Union)
This appliance is supplied fitted with a BS1363 mains plug and a BS1362 10A
fuse. If this plug is removed from the appliance, please ensure it is disposed
of safely as a disconnected plug is dangerous if reconnected to the mains. If
any other type of plug is used, a 10A fuse must be fitted.
United Kingdom
This appliance is supplied fitted with a Schuko mains plug. If this plug is
removed from the appliance, please ensure it is disposed of safely as a
disconnected plug is dangerous if reconnected to the mains.
European Union
RATING PLATE LABELS
16
17
1608004013
1208001360
1208001365
29108121
29109182
29108188
Screw
Pressure tube
Supply tube
18” (46 cm)
18
19
19
19
19
20
20
21
110v cord standard 62031-1 1608005005
230v cord EU
230V cord UK
230V cord
29103275
62058
62059
1208001342
1608002814
1608002815
Switch 29108135 1608004015
230v switch 29103270 1608003995
Switch boot 23089190 1608003922
22
23
24
Strain relief 29108165 1608004026
Cap and O-ring 22071003 1208001279
Nozzle assembly 29108246 1208001380
25
26
27
28
Tube retainer 29103298 1608004004
Item #17
Strainer 29108140 1608004016
Wire connector 29108160 1608004024
120800136629108189Supply tube
36” (91 cm)
18
120800136629108189Supply tube
48” (122 cm)
18
3
Dome Lt Blue 230V 95122942 1208001542
Screw 22071045 1608003880
37
38
Mount plate 29103295 1208001344 39
bgequip.com

User Manual
FLEX-A-LITE 2600 FOGGER
If you wish to discard electrical and electronic equipment (EEE), please
contact your dealer or supplier for further information.
This symbol is only valid in the European Union (EU). If you wish to discard
of this product, please contact your local authorities or dealer and ask for
the correct method of disposal.
Professional users in the European Union
Countries outside of the European Union or United States
Please follow all local regulations when disposing of electrical equipment.
DISPOSAL
United States
Private UK/ EU households: Information on Disposal for
Users of WEEE
United Kingdom / European Union
This symbol (Figure 5) on the product(s) and / or accompanying
documents means that used electrical and electronic
equipment (WEEE) should not be mixed with general household
waste.
For proper treatment, recovery and recycling, please take this product (s) to
designated collection points where it will be accepted free of charge.
Alternatively, in some countries, you may be able to return your products to
your local retailer upon purchase of an equivalent new product. Disposing
of this product correctly will help save valuable resources and prevent any
potential negative effects on human health and the environment, which
could otherwise arise from inappropriate waste handling. Please contact
your local authority for further details of your nearest designated collection
point.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with your national legislation.
Contact your local distributor or Pelsis country-specific location for
information on spares and service.
US: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
Contact Number: 1-800-544-8811
Email Address: [email protected]
UK: Pelsis Ltd, Sterling House, Grimbald Crag Close,
Knaresborough, HG5 8PJ, UK.
Contact Number: [phone]
Europe: Pelsis Belgium NV, Industrieweg 15, 2880,
Bornem, Belgium.
Contact Number: [phone]
All Other Countries: B&G Equipment, 135 Region South,
Jackson, GA, 30233, USA
Contact Number: 1-678-688-5601
Email Address: [email protected]
CONTACT
B&G Equipment warrants to the original purchaser for one year after the
date of purchase that its products are free from manufacturing defects.
Should any defect appear and be the subject of a written notice from
purchaser, received by B&G Equipment within the one-year period, B&G
Equipment at its option will repair, replace or send replacement parts for
the defective product at its expense. If repair parts are necessary, these
could be either new or remanufactured, but all shall be of new quality. Note:
Some components like Engines and Blowers are covered by separate
warranties by the Manufacturer, and excluded from any warranty offered by
B&G Equipment. These may have different terms and claim procedures. B&G
Equipment can supply these Warranty Statements to you, if requested and
applicable. The foregoing is the sole and exclusive remedy for any breach of
warranty by B&G Equipment. This warranty does not cover cosmetic
damage or damage due to the Acts of God, accident, misuse, abuse, normal
wear or negligence to the product. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE EXCLUDED
AND B&G EQUIPMENT SHALL HAVE NO LIABILITY FOR ANY CONSEQUENTIAL,
INCIDENTAL OR SPECIAL DAMAGES EVEN IF B&G EQUIPMENT WAS APPRISED
OF THE POSSIBILITY THEREOF. In no event shall B&G Equipment’s liability
hereunder exceed the amount of the purchase price paid for the product.
Any warranty claim must be accompanied by proof of purchase such as a
sales receipt, serial number or receipted invoice to establish that the
product is within the warranty period.
WARRANTY
SolutionProblem
TROUBLESHOOTING
Fog or mist is weak.
Liquid forms around the base
of the motor housing, around
mounting screws.
Fogger is operating erratically;
frequently turning on and off.
Fogger becomes very
warm/hot during normal
operation.
Tighten the tank cap.
Unit may have been operating too
long and fog droplets in the air are
forming on the metal screws.
Inspect the electric cord and the
plug for damage. Motor may be
damaged from moisture, replace
motor.
Remove the lower plate (motor
guard) and clean the filters with a
nylon brush
4bgequip.com
Figure 5
V031722