Liquid - Secure application hose to
the LIQUID quick connect.
Foam - Secure application hose to the
F AM quick connect.
Opera ing Ins ruc ions
W D TREATMENT SYSTEM (WTS-NS)
USER’S MANUAL
• Adjust the operating pressure between 50 and 70 PSIG.
• Turn clockwise to increase
pressure and counter clock-
wise to decrease pressure.
Applica ion Tips
Opera ion
Mixing and Filling
• To ensure adequate air pressure in tank, add only 3 gal.
liquid to tank.
• Make sure switch on compressor is in the ff position, and
unit is unplugged from wall connection.
• When mixing insecticides in the tank, use the gallon and
liter marks on the side.
• Mix all insecticides according to label
directions.
• Foaming agent must be added to tank to make foam
Pressurizing the Tank
• Connect unit to electric outlet with 3 terminal electric cord.
• Start compressor by depressing the on/off switch.
• Compressor maintains pressure in the tank, it will automati-
cally cycle on and off during normal use.
Safe y Precau ions
24040104 WTS-NS Rev 6/17
Before S ar ing
• Secure all hose connections.
• Lock the 30-L valve.
• Tighten (snug) tank cap.
• Be certain the tank is clean.
Pressure Adjus men
• Do not connect unit to external air or gas source;
use only supplied compressor.
• Do not pressurize an empty tank.
• Release air at relief valve before removing cap
from tank top.
• Do not transport the unit while tank is pressurized.
• Do not treat voids with electrical outlets or cables.
• Always use a grounded
(3 terminal) extension cord.
• Quick-connection between
the compressor and regular
can become hot to touch.
‘
‘‘
‘
FOAM
1
3
1) Applying foam or liquid to narrow
spaces, voids
2) Applying
foam to large
voids, surfaces
3) Injecting
liquid into
structural wood
4) Applying foam to large and small
wall voids, and beneath a concrete
slab
2
4
LIQUID
