B&Q FPLMP138 User manual

Petrol Lawnmower
138 cm3
Original Instructions – FPLMP138_GB_V04_20180927
WARNING: Read the instructions before using the product!
FPLMP138
EAN: 3663602423287
3663602423287-GB-V04.indd 1 27/9/2018 14:54

2
FPLMP138 FPLMP138
Let’s
get started...
These instructions are for your safety. Please read through
them thoroughly before use and retain them for future
reference.
Getting Started... 02
Safety information 03
Your product 12
Before you start 16
Quick start 24
In more detail... 26
Product functions 27
Operation 31
Care and maintenance 34
Troubleshooting 44
Recycling and disposal 46
Guarantee 46
EC declaration of conformity 47
Safety warnings
Petrol powered lawnmowers safety warnings
IMPORTANT Read carefully before use.
Keep for future reference.
WARNING! Your safety and the safety of others is very important. Of course,
it is not practical or possible to warn you about all the hazards associated
with operating or maintaining this product. At all times you must use your own
good judgment.
Training
1.
Read the instructions carefully. Be familiar with the controls and the proper use of
the product.
2. Never allow children or people unfamiliar with these instructions to use the product.
Local regulations can restrict the age of the operator.
3. Never mow while people, especially children or pets, are nearby.
4. Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
5. The operators must receive a proper training in the use, adjustment and operation
of the product, including prohibited operations.
Preparation
1. While mowing, always wear protective footwear and long trousers. Do not operate
the product when barefoot or wearing open sandals.
2.
Thoroughly inspect the area where the product is to be used and remove all stones,
sticks, wires, bones, and other foreign objects.
3. WARNING - Petrol is highly ammable.
• Store fuel in containers specically designed for this purpose.
• Refuel outdoors only and do not smoke while refuelling.
• Add fuel before starting the engine. Never remove the fuel tank cap or add petrol
while the engine is running or when the engine is hot.
• If petrol is spilt, do not attempt to start the engine. Move the product away from
the area of spillage and avoid creating any source of ignition until fuel vapours
have dissipated.
• Replace all fuel tank and container caps securely.
4. Replace faulty silencers.
3663602423287-GB-V04.indd 2 27/9/2018 14:54

3
FPLMP138 FPLMP138
Getting Started . . .
Safety warnings
Petrol powered lawnmowers safety warnings
IMPORTANT Read carefully before use.
Keep for future reference.
WARNING! Your safety and the safety of others is very important. Of course,
it is not practical or possible to warn you about all the hazards associated
with operating or maintaining this product. At all times you must use your own
good judgment.
Training
1.
Read the instructions carefully. Be familiar with the controls and the proper use of
the product.
2. Never allow children or people unfamiliar with these instructions to use the product.
Local regulations can restrict the age of the operator.
3. Never mow while people, especially children or pets, are nearby.
4. Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
5. The operators must receive a proper training in the use, adjustment and operation
of the product, including prohibited operations.
Preparation
1. While mowing, always wear protective footwear and long trousers. Do not operate
the product when barefoot or wearing open sandals.
2.
Thoroughly inspect the area where the product is to be used and remove all stones,
sticks, wires, bones, and other foreign objects.
3. WARNING - Petrol is highly ammable.
• Store fuel in containers specically designed for this purpose.
• Refuel outdoors only and do not smoke while refuelling.
• Add fuel before starting the engine. Never remove the fuel tank cap or add petrol
while the engine is running or when the engine is hot.
• If petrol is spilt, do not attempt to start the engine. Move the product away from
the area of spillage and avoid creating any source of ignition until fuel vapours
have dissipated.
• Replace all fuel tank and container caps securely.
4. Replace faulty silencers.
Safety information
3663602423287-GB-V04.indd 3 27/9/2018 14:54

4
FPLMP138 FPLMP138
Getting Started . . .
5. Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged. Replace worn or damaged blades and bolts in
sets to preserve balance.
6. CAUTION! Do not touch rotating cutting means.
7. Engine brake (brake clutch): Use the brake clutch to stop the engine. When you
release the bar, the engine and the blade stop automatically in a few seconds. To
mow, hold the bar in the working position. Before you start to mow, check the brake
clutch several times to be sure that it is working correctly. Ensure that the brake wire
can be smoothly operated (e.g. is not catching or kinking in any way).
Operation
1. Do not operate the engine in a conned space where dangerous carbon monoxide
fumes can accumulate.
2. Mow only in daylight or in good articial light.
3. Do not operate the product while being tired, ill or under the inuence of alcohol or
drugs.
4. Avoid operating the product in wet grass, where feasible.
5. Always be sure of your footing on slopes.
6. Walk, never run.
7. Mow across the face of slopes, never up and down.
8. Exercise extreme caution when changing direction on slopes.
9. Do not mow excessively steep slopes, near drop-offs, ditches or embankments.
10.
Avoid using the product in bad weather conditions especially when there is a risk
of lightning.
11. Use extreme caution when reversing or pulling the product towards you.
12. Stop the blade(s) if the product has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the product to and from the area
to be mowed.
13. Never operate the product with defective guards, shields, or without safety devices,
for example deectors and/or grass catchers, in place.
14. Do not change the engine governor settings or overspeed the engine.
15. Disengage the drive clutch before starting the engine.
16. Do not alter or tamper with any sealed adjustments for the engine speed control.
17. Do not tamper or disable any product’s safety systems or features.
18. Ensure and regularly check that all starting interlocks and operator presence controls
are functioning correctly.
19. Stop the product according to instructions in this manual before leaving the operator’s
position and park it in a safe location.
20. Start the engine carefully according to instructions and with feet well away from the
blades.
21. Do not tilt the product when starting the engine or switching on the engine, except if
the product has to be tilted for starting. In this case, do not tilt it more than necessary
and lift only the part which is away from the operator. Always ensure that both hands
are in the operating position before returning the product to the ground.
22. Keep hands and feet away from the cutting means at all times and especially when
switching on the engine.
23. Do not put hands or feet near or under rotating parts. Keep clear of the discharge
opening at all times.
24. Never pick up or carry a product while the engine is running.
25. In case of any situation mentioned below, stop the engine and disconnect the spark
plug connector. Make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• before clearing a blockage or unclogging chute,
• before checking, cleaning or working on the product,
• after striking a foreign object. Inspect the product for damage and make repairs
as necessary
• if the product starts to vibrate abnormally (check immediately)
> inspect for damage
> replace or repair any damaged parts
> check for and tighten any loose parts
• whenever you leave the product
• before refuelling
26. Never touch the exhaust, exhaust guard or cooling ns when the engine is hot.
27. Never carelessly touch hot parts of the product. While the product is in operation
and shortly after that, its parts such as the exhaust, engine, and other surfaces are
extremely hot! Risk of burns! Pay attention to the markings on the product.
28. Make sure that the air vents of the combustion engine are clear. Keep the air vents
free of dust, dirt particles, gases and fumes.
29. Never start or run the engine indoors. The exhaust fumes are dangerous, containing
carbon monoxide, an odourless and deadly gas. Operate this product only in well-
ventilated outdoor areas.
Maintenance and storage
1. Follow the maintenance and repair instructions of this product. Never carry out any
modications of the product. Never change the preset governor speed or the engine
and product settings. Information about maintenance and repair are provided in this
instruction manual.
2. Keep all nuts, bolts and screws tight to be sure that the product is in safe working
condition.
3. Improper maintenance or using non-genuine parts not recommended by the
manufacturer may lead to malfunction/failure of the product. Many accidents are
caused by poorly maintained products.
Safety information
3663602423287-GB-V04.indd 4 27/9/2018 14:54

5
FPLMP138 FPLMP138
Getting Started . . .
5. Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged. Replace worn or damaged blades and bolts in
sets to preserve balance.
6. CAUTION! Do not touch rotating cutting means.
7. Engine brake (brake clutch): Use the brake clutch to stop the engine. When you
release the bar, the engine and the blade stop automatically in a few seconds. To
mow, hold the bar in the working position. Before you start to mow, check the brake
clutch several times to be sure that it is working correctly. Ensure that the brake wire
can be smoothly operated (e.g. is not catching or kinking in any way).
Operation
1. Do not operate the engine in a conned space where dangerous carbon monoxide
fumes can accumulate.
2. Mow only in daylight or in good articial light.
3. Do not operate the product while being tired, ill or under the inuence of alcohol or
drugs.
4. Avoid operating the product in wet grass, where feasible.
5. Always be sure of your footing on slopes.
6. Walk, never run.
7. Mow across the face of slopes, never up and down.
8. Exercise extreme caution when changing direction on slopes.
9. Do not mow excessively steep slopes, near drop-offs, ditches or embankments.
10.
Avoid using the product in bad weather conditions especially when there is a risk
of lightning.
11. Use extreme caution when reversing or pulling the product towards you.
12. Stop the blade(s) if the product has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the product to and from the area
to be mowed.
13. Never operate the product with defective guards, shields, or without safety devices,
for example deectors and/or grass catchers, in place.
14. Do not change the engine governor settings or overspeed the engine.
15. Disengage the drive clutch before starting the engine.
16. Do not alter or tamper with any sealed adjustments for the engine speed control.
17. Do not tamper or disable any product’s safety systems or features.
18. Ensure and regularly check that all starting interlocks and operator presence controls
are functioning correctly.
19. Stop the product according to instructions in this manual before leaving the operator’s
position and park it in a safe location.
20. Start the engine carefully according to instructions and with feet well away from the
blades.
21. Do not tilt the product when starting the engine or switching on the engine, except if
the product has to be tilted for starting. In this case, do not tilt it more than necessary
and lift only the part which is away from the operator. Always ensure that both hands
are in the operating position before returning the product to the ground.
22. Keep hands and feet away from the cutting means at all times and especially when
switching on the engine.
23. Do not put hands or feet near or under rotating parts. Keep clear of the discharge
opening at all times.
24. Never pick up or carry a product while the engine is running.
25. In case of any situation mentioned below, stop the engine and disconnect the spark
plug connector. Make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• before clearing a blockage or unclogging chute,
• before checking, cleaning or working on the product,
• after striking a foreign object. Inspect the product for damage and make repairs
as necessary
• if the product starts to vibrate abnormally (check immediately)
> inspect for damage
> replace or repair any damaged parts
> check for and tighten any loose parts
• whenever you leave the product
• before refuelling
26. Never touch the exhaust, exhaust guard or cooling ns when the engine is hot.
27. Never carelessly touch hot parts of the product. While the product is in operation
and shortly after that, its parts such as the exhaust, engine, and other surfaces are
extremely hot! Risk of burns! Pay attention to the markings on the product.
28. Make sure that the air vents of the combustion engine are clear. Keep the air vents
free of dust, dirt particles, gases and fumes.
29. Never start or run the engine indoors. The exhaust fumes are dangerous, containing
carbon monoxide, an odourless and deadly gas. Operate this product only in well-
ventilated outdoor areas.
Maintenance and storage
1. Follow the maintenance and repair instructions of this product. Never carry out any
modications of the product. Never change the preset governor speed or the engine
and product settings. Information about maintenance and repair are provided in this
instruction manual.
2. Keep all nuts, bolts and screws tight to be sure that the product is in safe working
condition.
3. Improper maintenance or using non-genuine parts not recommended by the
manufacturer may lead to malfunction/failure of the product. Many accidents are
caused by poorly maintained products.
Safety information
3663602423287-GB-V04.indd 5 27/9/2018 14:54

6
FPLMP138 FPLMP138
Getting Started . . .
4. Never store the product with petrol in the tank inside a building where fumes can
reach an open ame or spark.
5. To reduce the re hazard, keep the engine, silencer and petrol storage area free of
vegetative material and excessive grease.
6. Allow the engine to cool before storing in any enclosure.
7. Check the grass catcher frequently for wear or deterioration.
8. If the fuel tank has to be drained, this should be done outdoors.
9. Wear protective gloves when removing and re-assembling the cutting means.
10. Replace worn or damaged parts for safety. Only use replacement blades and spare
parts recommended by the manufacturer.
11. Ensure that only replacement cutting means of the right type are used.
Fuel handling
1. Before refuelling, stop the engine, disconnect the spark plug connector and let the
product cool. Fuel and fuel vapour are highly ammable. Take care when handling
fuel. Never smoke when you are refuelling the product. Do not refuel the product, if
there is an open re in the vicinity!
2.
Always use suitable aids such as funnels and ller necks. Do not spill any fuel on the
product or its exhaust system. There is a risk of ignition. Remove spilt fuel carefully
from all parts of the product. Any residue which may be present must be completely
removed before the product is operated!
3. Fuel fumes can ignite. Never use the product in environments where there is a risk
of explosion.
4.
Petrol engines produce toxic carbon monoxide exhaust fumes. Breathing carbon
monoxide can cause nausea, fainting or even death.
5. Never breathe in any fuel fumes, when you are refuelling the product. Never ll
the fuel tank in enclosed spaces, such as basements or sheds. There is a risk of
poisoning and explosion!
6. Avoid skin contact with petrol.
7. Do not eat or drink, while you are refuelling the product. If you have swallowed petrol
or oil, or if petrol or oil has got into your eyes, then seek medical advice immediately.
8. Close the fuel tank cap immediately after lling the fuel tank. Make sure that it is
properly closed.
9. Never use the product without an air lter.
10. Fuel vapour pressure may build up inside the fuel tank depending on the fuel used,
weather conditions and the venting system. To reduce the risk of burns and other
personal injuries, remove the fuel tank cap carefully to allow any pressure build-up
to release slowly.
11. Be aware of re risks, explosion and inhalation risks.
12. Do not smoke while operating the product, handling fuel or near fuel.
13. Ensure the spark plug connector is securely attached. A loose connector may cause
electrical arcing that could ignite combustible fumes and cause a re or explosion.
14. Check regularly for leaks from the fuel tank cap and fuel lines.
15. Tighten the fuel tank cap thoroughly after relling the fuel tank.
16. Do not operate the product if it is leaking fuel. Do not remove the fuel tank cap while
the engine is running.
17. Use caution when handling fuel. To avoid any accidental res, move the product at
least 3metres from the fuelling point before starting the engine.
18. Do not store containers lled with fuel or rell the fuel tank in any place where there
is a boiler, stove, wood re, electrical sparks, welding sparks, or other sources of
heat or re which might ignite the fuel.
19. If any fuel spillage occurs during refuelling, use a dry rag to wipe spills and allow
remaining fuel to evaporate before starting the engine again.
20. If you have spilt fuel on yourself or on your clothes, change your clothes and wash any
part of your body that has come in contact with fuel before starting the engine again.
21. If fuel is ignited, put out the re with a dry powder re extinguisher.
22. Store fuel in containers specically designed for this purpose.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they in good condition.
4. Keep a tight grip on the handles/gripping surfaces.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period
of time.
Safety information
3663602423287-GB-V04.indd 6 27/9/2018 14:54

7
FPLMP138 FPLMP138
Getting Started . . .
4. Never store the product with petrol in the tank inside a building where fumes can
reach an open ame or spark.
5. To reduce the re hazard, keep the engine, silencer and petrol storage area free of
vegetative material and excessive grease.
6. Allow the engine to cool before storing in any enclosure.
7. Check the grass catcher frequently for wear or deterioration.
8. If the fuel tank has to be drained, this should be done outdoors.
9. Wear protective gloves when removing and re-assembling the cutting means.
10. Replace worn or damaged parts for safety. Only use replacement blades and spare
parts recommended by the manufacturer.
11. Ensure that only replacement cutting means of the right type are used.
Fuel handling
1. Before refuelling, stop the engine, disconnect the spark plug connector and let the
product cool. Fuel and fuel vapour are highly ammable. Take care when handling
fuel. Never smoke when you are refuelling the product. Do not refuel the product, if
there is an open re in the vicinity!
2.
Always use suitable aids such as funnels and ller necks. Do not spill any fuel on the
product or its exhaust system. There is a risk of ignition. Remove spilt fuel carefully
from all parts of the product. Any residue which may be present must be completely
removed before the product is operated!
3. Fuel fumes can ignite. Never use the product in environments where there is a risk
of explosion.
4.
Petrol engines produce toxic carbon monoxide exhaust fumes. Breathing carbon
monoxide can cause nausea, fainting or even death.
5. Never breathe in any fuel fumes, when you are refuelling the product. Never ll
the fuel tank in enclosed spaces, such as basements or sheds. There is a risk of
poisoning and explosion!
6. Avoid skin contact with petrol.
7. Do not eat or drink, while you are refuelling the product. If you have swallowed petrol
or oil, or if petrol or oil has got into your eyes, then seek medical advice immediately.
8. Close the fuel tank cap immediately after lling the fuel tank. Make sure that it is
properly closed.
9. Never use the product without an air lter.
10. Fuel vapour pressure may build up inside the fuel tank depending on the fuel used,
weather conditions and the venting system. To reduce the risk of burns and other
personal injuries, remove the fuel tank cap carefully to allow any pressure build-up
to release slowly.
11. Be aware of re risks, explosion and inhalation risks.
12. Do not smoke while operating the product, handling fuel or near fuel.
13. Ensure the spark plug connector is securely attached. A loose connector may cause
electrical arcing that could ignite combustible fumes and cause a re or explosion.
14. Check regularly for leaks from the fuel tank cap and fuel lines.
15. Tighten the fuel tank cap thoroughly after relling the fuel tank.
16. Do not operate the product if it is leaking fuel. Do not remove the fuel tank cap while
the engine is running.
17. Use caution when handling fuel. To avoid any accidental res, move the product at
least 3metres from the fuelling point before starting the engine.
18. Do not store containers lled with fuel or rell the fuel tank in any place where there
is a boiler, stove, wood re, electrical sparks, welding sparks, or other sources of
heat or re which might ignite the fuel.
19. If any fuel spillage occurs during refuelling, use a dry rag to wipe spills and allow
remaining fuel to evaporate before starting the engine again.
20. If you have spilt fuel on yourself or on your clothes, change your clothes and wash any
part of your body that has come in contact with fuel before starting the engine again.
21. If fuel is ignited, put out the re with a dry powder re extinguisher.
22. Store fuel in containers specically designed for this purpose.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they in good condition.
4. Keep a tight grip on the handles/gripping surfaces.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period
of time.
Safety information
3663602423287-GB-V04.indd 7 27/9/2018 14:54

8
FPLMP138 FPLMP138
Getting Started . . .
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
1. Always be alert when using this product, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
2. Stop the engine and disconnect the spark plug connector if there are
malfunctions. Have the product checked by a qualied professional and repaired,
if necessary, before you operate it again.
3. In case of re stop the engine and disconnect the spark plug connector. Take
re-extinguishing measures immediately if the product switch is no longer accessible.
WARNING! Never use water to extinguish the product on re. Burning fuel must
be extinguished with special extinguishing agents! We recommend that you
keep a suitable re extinguisher within reach in your work area! We recommend
to have dry powder re extinguisher always available.
Residual risks
Even if you are operating this product in accordance with all the safety requirements,
potential risks of injury and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration emission if the product is used over long
periods of time or not adequately managed and properly maintained.
2. Injuries and damage to property due to broken application tools or the sudden impact
of hidden objects during use.
3. Danger of injury and property damage caused by ying objects.
4. Burns, if touching hot surfaces.
WARNING! This product produces an electromagnetic eld during operation!
This eld may under some circumstances interfere with active or passive
medical implants! To reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this product!
Symbols
On the product, the rating label and within these instructions you will nd among others
the following symbols and abbreviations. Familiarise yourself with them to reduce hazards
like personal injuries and damage to property.
kW Kilowatt ml Millilitre
cm3Cubic centimetre g/kWh Gram per kilowatt per hour
/min or min-1 Per minute kg/h Kilogram per hour
mm Millimetre °C Degree Celsius
cm Centimetre dB(A) Decibel (A-rated)
kg Kilogram m/s2Metres per second squared
l Litre
mm.yyyy
Manufacturing date code; year of manufacturing (yyyy) and month of
manufacturing (mm)
Description of signal words:
DANGER! The signal word that indicates a hazard with a high level of risk
which, if not avoided, will result in death or serious injury.
WARNING! The signal word that indicates a hazard with a medium level of risk
which, if not avoided, could result in death or serious injury.
CAUTION! The signal word that indicates a hazard with a low level of risk
which, if not avoided, could result in minor or moderate injury.
NOTE! Indicates a practical tip, advice or practice not related to personal
injury.
Lock/to tighten or secure. Wear respiratory protection.
Unlock/to loosen. Wear hearing protection.
Wear eye protection.
Note/Remark. Wear protective gloves.
Caution/Warning.
Read the instruction manual.
Wear protective, slip-resistant
safety footwear.
Mow across the face of slopes,
never up and down.
Safety information
3663602423287-GB-V04.indd 8 27/9/2018 14:54

9
FPLMP138 FPLMP138
Getting Started . . .
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
1. Always be alert when using this product, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
2. Stop the engine and disconnect the spark plug connector if there are
malfunctions. Have the product checked by a qualied professional and repaired,
if necessary, before you operate it again.
3. In case of re stop the engine and disconnect the spark plug connector. Take
re-extinguishing measures immediately if the product switch is no longer accessible.
WARNING! Never use water to extinguish the product on re. Burning fuel must
be extinguished with special extinguishing agents! We recommend that you
keep a suitable re extinguisher within reach in your work area! We recommend
to have dry powder re extinguisher always available.
Residual risks
Even if you are operating this product in accordance with all the safety requirements,
potential risks of injury and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration emission if the product is used over long
periods of time or not adequately managed and properly maintained.
2. Injuries and damage to property due to broken application tools or the sudden impact
of hidden objects during use.
3. Danger of injury and property damage caused by ying objects.
4. Burns, if touching hot surfaces.
WARNING! This product produces an electromagnetic eld during operation!
This eld may under some circumstances interfere with active or passive
medical implants! To reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this product!
Symbols
On the product, the rating label and within these instructions you will nd among others
the following symbols and abbreviations. Familiarise yourself with them to reduce hazards
like personal injuries and damage to property.
kW Kilowatt ml Millilitre
cm3Cubic centimetre g/kWh Gram per kilowatt per hour
/min or min-1 Per minute kg/h Kilogram per hour
mm Millimetre °C Degree Celsius
cm Centimetre dB(A) Decibel (A-rated)
kg Kilogram m/s2Metres per second squared
l Litre
mm.yyyy
Manufacturing date code; year of manufacturing (yyyy) and month of
manufacturing (mm)
Description of signal words:
DANGER! The signal word that indicates a hazard with a high level of risk
which, if not avoided, will result in death or serious injury.
WARNING! The signal word that indicates a hazard with a medium level of risk
which, if not avoided, could result in death or serious injury.
CAUTION! The signal word that indicates a hazard with a low level of risk
which, if not avoided, could result in minor or moderate injury.
NOTE! Indicates a practical tip, advice or practice not related to personal
injury.
Lock/to tighten or secure. Wear respiratory protection.
Unlock/to loosen. Wear hearing protection.
Wear eye protection.
Note/Remark. Wear protective gloves.
Caution/Warning.
Read the instruction manual.
Wear protective, slip-resistant
safety footwear.
Mow across the face of slopes,
never up and down.
Safety information
3663602423287-GB-V04.indd 9 27/9/2018 14:54

10
FPLMP138 FPLMP138
Getting Started . . .
Press the primer 3 times before starting the cold engine.
Inspect the area where the product is to be used and remove all objects
which can be thrown by the product. If objects are hidden while operating,
stop the engine and remove the objects.
Keep hands and feet away from sharp rotating parts – risk of injury! When
cleaning, repairing or inspecting, make sure the cutting means and all
moving parts have stopped. Disconnect the spark plug connector, and
keep the cap away from the plug to prevent accidental starting.
Cutting means continues to rotate after the engine is stopped. Wait until
all components have completely stopped before touching the product.
Pay particular attention when working on the blades!
Objects thrown by the product could hit the operator or other bystanders.
Always ensure that other people and pets remain at a safe distance
from the product when it is in operation. In general, children must not
come near the area where the product is operating.
Release the brake clutch to stop the engine and the cutting means.
Pull the drive clutch to engage the wheels. The lawnmower starts to
move forward.
Engine manual start; recoil starter.
Guaranteed sound power level value in dB.
FPLMP138
Designation of the tool
(FP_Brand Name; LM_Lawn Mower; P_Petrol power)
The product complies with the applicable European directives and an
evaluation method of conformity for these directives was done.
Safety information
Wear tight-tted protective clothing.
Do not expose the product to rain or wet conditions.
Open ames in the work area, around the product and in the vicinity of
ammable materials are prohibited!
Do not smoke in the work area, around the product and in the vicinity
of ammable materials!
Risk of re/ammable materials.
Hot surface, do not touch! High temperatures on the product’s surfaces
and structural parts that could cause burns, if they are touched. The
product can also stay hot for a longer period of time after the operation!
Petrol engines produce toxic carbon monoxide exhaust fumes. Breathing
carbon monoxide can cause nausea, fainting or even death. Do not
operate the engine indoors!
Only refuel unleaded petrol!
Add engine oil.
Check and rell oil.
Stop the engine before refuelling the fuel tank. Flammable material.
Keep away from re. Do not add fuel with a running engine.
Stop the engine and disconnect the spark plug connector before assembly,
cleaning, adjustments, maintenance, storage and transportation.
3663602423287-GB-V04.indd 10 27/9/2018 14:54

11
FPLMP138 FPLMP138
Getting Started . . .
Press the primer 3 times before starting the cold engine.
Inspect the area where the product is to be used and remove all objects
which can be thrown by the product. If objects are hidden while operating,
stop the engine and remove the objects.
Keep hands and feet away from sharp rotating parts – risk of injury! When
cleaning, repairing or inspecting, make sure the cutting means and all
moving parts have stopped. Disconnect the spark plug connector, and
keep the cap away from the plug to prevent accidental starting.
Cutting means continues to rotate after the engine is stopped. Wait until
all components have completely stopped before touching the product.
Pay particular attention when working on the blades!
Objects thrown by the product could hit the operator or other bystanders.
Always ensure that other people and pets remain at a safe distance
from the product when it is in operation. In general, children must not
come near the area where the product is operating.
Release the brake clutch to stop the engine and the cutting means.
Pull the drive clutch to engage the wheels. The lawnmower starts to
move forward.
Engine manual start; recoil starter.
Guaranteed sound power level value in dB.
FPLMP138
Designation of the tool
(FP_Brand Name; LM_Lawn Mower; P_Petrol power)
The product complies with the applicable European directives and an
evaluation method of conformity for these directives was done.
Safety information
Wear tight-tted protective clothing.
Do not expose the product to rain or wet conditions.
Open ames in the work area, around the product and in the vicinity of
ammable materials are prohibited!
Do not smoke in the work area, around the product and in the vicinity
of ammable materials!
Risk of re/ammable materials.
Hot surface, do not touch! High temperatures on the product’s surfaces
and structural parts that could cause burns, if they are touched. The
product can also stay hot for a longer period of time after the operation!
Petrol engines produce toxic carbon monoxide exhaust fumes. Breathing
carbon monoxide can cause nausea, fainting or even death. Do not
operate the engine indoors!
Only refuel unleaded petrol!
Add engine oil.
Check and rell oil.
Stop the engine before refuelling the fuel tank. Flammable material.
Keep away from re. Do not add fuel with a running engine.
Stop the engine and disconnect the spark plug connector before assembly,
cleaning, adjustments, maintenance, storage and transportation.
3663602423287-GB-V04.indd 11 27/9/2018 14:54

12
FPLMP138 FPLMP138
Getting Started . . .
Your product
1
2
34
67
8
5
9a
10
11
12
141516
17
18
21
22
23
24
25
20
19
26a
26
27
28
26b
26c
26e
26d
9
13
4
1. Upper handle bar
2. Drive clutch
3. Brake clutch
4. Locking knob with M8 nut (x4)
5. Bolt M8x43 mm (x2)
6. Drive wire
7. Lower handle bar
8. Wire clip (x2)
9. Fuel tank
a. Fuel tank cap
10. Air vents
11. Primer
12. Air lter case
a. Filter *
b. Cover *
13. Fuel drain screw
14. Spark plug connector
a. Spark plug *
15. Mufer
16. Wheel
17. Oil tank cap
18. Lever for cutting height adjustment
19. Handle support
20. Bolt M8x35 mm (x2)
21. Rear deector guard
22. Grass catcher
a. Hook * (x2)
b. Handle *
23. Hook for recoil starter handle
24. Recoil starter handle
25. Brake wire
26. Cutting means (blade)
a. Spindle
b. Pin
c. Support
d. Washer
e. Hex bolt
27. Spark plug wrench
28. Discharge chute
NOTE: Parts marked with *are not shown in this overview. Refer to the
respective section in the instruction manual.
3663602423287-GB-V04.indd 12 27/9/2018 14:54

13
FPLMP138 FPLMP138
Getting Started . . .
Your product
1
2
34
67
8
5
9a
10
11
12
141516
17
18
21
22
23
24
25
20
19
26a
26
27
28
26b
26c
26e
26d
9
13
4
1. Upper handle bar
2. Drive clutch
3. Brake clutch
4. Locking knob with M8 nut (x4)
5. Bolt M8x43 mm (x2)
6. Drive wire
7. Lower handle bar
8. Wire clip (x2)
9. Fuel tank
a. Fuel tank cap
10. Air vents
11. Primer
12. Air lter case
a. Filter *
b. Cover *
13. Fuel drain screw
14. Spark plug connector
a. Spark plug *
15. Mufer
16. Wheel
17. Oil tank cap
18. Lever for cutting height adjustment
19. Handle support
20. Bolt M8x35 mm (x2)
21. Rear deector guard
22. Grass catcher
a. Hook * (x2)
b. Handle *
23. Hook for recoil starter handle
24. Recoil starter handle
25. Brake wire
26. Cutting means (blade)
a. Spindle
b. Pin
c. Support
d. Washer
e. Hex bolt
27. Spark plug wrench
28. Discharge chute
NOTE: Parts marked with *are not shown in this overview. Refer to the
respective section in the instruction manual.
3663602423287-GB-V04.indd 13 27/9/2018 14:54

14
FPLMP138 FPLMP138
Getting Started . . .
Your product
Technical specications
General
> Dimensions: approx. 290 x 495 x 990 mm
> Machine mass with empty tanks and in the
normal operating conguration: approx. 23 kg
> Fuel tank capacity: 900 ml (cm³)
> Petrol type: #93, unleaded
> Engine oil capacity: 400 ml (cm³)
> Engine oil type: 4-stroke engine oil
(e.g. SAE 10W-30)
> Specic fuel consumption at max. engine power: 345 g/kWh
> Fuel consumption at max. engine power: 1 kg/h
> Cutting means: blade type: SMV 1816211
blade thickness: 2.5 mm
> Cutting width: 40 cm
> Cutting height: 25-75 mm
> Grass catcher volume: 45 l
Engine
> Engine model: SE560
> Engine type: air cooled, 4-stroke engine
> Engine displacement: 137.7 cm3
> Maximum operating engine speed
(rotational frequency): 2900 min-1
> Nominal power: 2.1 kW
> Spark plug type: LD K7TC
> Spark plug gap: 0.7-0.8 mm
> Carburettor: SE560
Sound level
> Sound pressure level at operator’s position LpA:83.7 dB(A)
> Uncertainty K: 3dB(A)
> Sound power level LWA:93.36 dB(A)
> Uncertainty K: 2.34 dB(A)
> Guaranteed sound power level LWA
(acc. to 2000/14/EC amended by 2005/88/EC): 96 dB(A)
Vibration level
> Hand-arm vibration ahw:4.036 m/s2
> Uncertainty K: 1.5 m/s2
The sound values have been determined according to noise test code given in
EN ISO 5395-1 and EN ISO 5395-2, using the basic standards ISO 3744 and ISO 11094.
Wear hearing protection, especially when sound pressure is over 80 dB(A).
The declared vibration value has been measured in accordance with a standard test
method (according to EN ISO 5395-1 and EN ISO 5395-2) and may be used for comparing
one product with another. The declared vibration value may also be used to evaluate
the exposure for the user caused by vibration in advance.
WARNING! Depending on the actual use of the product the vibration values
can differ from the declared total. Adopt proper measures to protect yourself
against vibration exposures. Take the whole work process including times
the product is running under no load or switched off into consideration!
Proper measures include among others regular maintenance and care of the
product and accessories, keeping hands warm, periodical breaks and proper
planning of work processes!
3663602423287-GB-V04.indd 14 27/9/2018 14:54

15
FPLMP138 FPLMP138
Getting Started . . .
Your product
Technical specications
General
> Dimensions: approx. 290 x 495 x 990 mm
> Machine mass with empty tanks and in the
normal operating conguration: approx. 23 kg
> Fuel tank capacity: 900 ml (cm³)
> Petrol type: #93, unleaded
> Engine oil capacity: 400 ml (cm³)
> Engine oil type: 4-stroke engine oil
(e.g. SAE 10W-30)
> Specic fuel consumption at max. engine power: 345 g/kWh
> Fuel consumption at max. engine power: 1 kg/h
> Cutting means: blade type: SMV 1816211
blade thickness: 2.5 mm
> Cutting width: 40 cm
> Cutting height: 25-75 mm
> Grass catcher volume: 45 l
Engine
> Engine model: SE560
> Engine type: air cooled, 4-stroke engine
> Engine displacement: 137.7 cm3
> Maximum operating engine speed
(rotational frequency): 2900 min-1
> Nominal power: 2.1 kW
> Spark plug type: LD K7TC
> Spark plug gap: 0.7-0.8 mm
> Carburettor: SE560
Sound level
> Sound pressure level at operator’s position LpA:83.7 dB(A)
> Uncertainty K: 3dB(A)
> Sound power level LWA:93.36 dB(A)
> Uncertainty K: 2.34 dB(A)
> Guaranteed sound power level LWA
(acc. to 2000/14/EC amended by 2005/88/EC): 96 dB(A)
Vibration level
> Hand-arm vibration ahw:4.036 m/s2
> Uncertainty K: 1.5 m/s2
The sound values have been determined according to noise test code given in
EN ISO 5395-1 and EN ISO 5395-2, using the basic standards ISO 3744 and ISO 11094.
Wear hearing protection, especially when sound pressure is over 80 dB(A).
The declared vibration value has been measured in accordance with a standard test
method (according to EN ISO 5395-1 and EN ISO 5395-2) and may be used for comparing
one product with another. The declared vibration value may also be used to evaluate
the exposure for the user caused by vibration in advance.
WARNING! Depending on the actual use of the product the vibration values
can differ from the declared total. Adopt proper measures to protect yourself
against vibration exposures. Take the whole work process including times
the product is running under no load or switched off into consideration!
Proper measures include among others regular maintenance and care of the
product and accessories, keeping hands warm, periodical breaks and proper
planning of work processes!
3663602423287-GB-V04.indd 15 27/9/2018 14:54

16
FPLMP138 FPLMP138
Getting Started . . .
Before you start
Unpacking
NOTE: The product is heavy, ask another person for assistance
if required.
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and protective shipping materials, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you nd
that parts are missing or show damage do not use the product and contact your
dealer. Using an incomplete or damaged product represents a hazard to operators
and property.
4. Ensure that you have all the accessories and tools needed for assembly and operation.
This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
You will need
(items not supplied)
> Suitable personal protective equipment
> Fuel funnel with lter
> Suitable engine oil (SAE10W-30)
> Suitable fuel (unleaded petrol)
> Container to collect fuel
> Container to collect oil
> Lubrication oil/grease
> Foam air lter oil
> Torque wrench (40-45 Nm)
(items supplied)
> Spark plug wrench (27)
Assembly
WARNING! The product must be fully assembled before the operation!
Do not use a product that is only partly assembled or assembled with damaged
parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to assemble the product easily!
Disconnect the spark plug connector (14)from the spark plug! Reconnect it
after assembly.
NOTE: Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
Handle bars
1.
Remove the M8x35 bolts (20) and the locking knobs (4) from the handle supports
(19) and keep them handy (Fig. 1).
4
19 20
1
3663602423287-GB-V04.indd 16 27/9/2018 14:54

17
FPLMP138 FPLMP138
Getting Started . . .
Before you start
Unpacking
NOTE: The product is heavy, ask another person for assistance
if required.
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and protective shipping materials, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you nd
that parts are missing or show damage do not use the product and contact your
dealer. Using an incomplete or damaged product represents a hazard to operators
and property.
4. Ensure that you have all the accessories and tools needed for assembly and operation.
This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
You will need
(items not supplied)
> Suitable personal protective equipment
> Fuel funnel with lter
> Suitable engine oil (SAE10W-30)
> Suitable fuel (unleaded petrol)
> Container to collect fuel
> Container to collect oil
> Lubrication oil/grease
> Foam air lter oil
> Torque wrench (40-45 Nm)
(items supplied)
> Spark plug wrench (27)
Assembly
WARNING! The product must be fully assembled before the operation!
Do not use a product that is only partly assembled or assembled with damaged
parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to assemble the product easily!
Disconnect the spark plug connector (14)from the spark plug! Reconnect it
after assembly.
NOTE: Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
Handle bars
1.
Remove the M8x35 bolts (20) and the locking knobs (4) from the handle supports
(19) and keep them handy (Fig. 1).
4
19 20
1
3663602423287-GB-V04.indd 17 27/9/2018 14:54

18
FPLMP138 FPLMP138
Getting Started . . .
2. Align the holes in the lower handle bars (7) with those in the handle supports (19) (Fig. 2).
The handle bar with hook for recoil starter handle (23) should be tted on the right-hand
side when standing behind the product (Fig. 2).
2
7
19
23
3. Fix the lower handle bars (7) to the handle supports (19) using M8x35 bolts (20)
and locking knobs (4) (Fig. 3).
3
7
20
4
19
4. Align the mounting holes of the upper handle bar (1) with the ones on the lower
handle bars (7). Align the hook for recoil starter handle (23) upwards. Secure the
connection using M8x43 bolts (5) and locking knobs (4) (Fig. 4).
1
4
7
5
23
4
5. Fix the drive wire (6) with the wire clip (8) to the lower handle bar (7) (Fig. 5).
5
6
8
7
Before you start
3663602423287-GB-V04.indd 18 27/9/2018 14:54

19
FPLMP138 FPLMP138
Getting Started . . .
Before you start
2. Align the holes in the lower handle bars (7) with those in the handle supports (19) (Fig. 2).
The handle bar with hook for recoil starter handle (23) should be tted on the right-hand
side when standing behind the product (Fig. 2).
2
7
19
23
3. Fix the lower handle bars (7) to the handle supports (19) using M8x35 bolts (20)
and locking knobs (4) (Fig. 3).
3
7
20
4
19
4. Align the mounting holes of the upper handle bar (1) with the ones on the lower
handle bars (7). Align the hook for recoil starter handle (23) upwards. Secure the
connection using M8x43 bolts (5) and locking knobs (4) (Fig. 4).
1
4
7
5
23
4
5. Fix the drive wire (6) with the wire clip (8) to the lower handle bar (7) (Fig. 5).
5
6
8
7
3663602423287-GB-V04.indd 19 27/9/2018 14:54

20
FPLMP138 FPLMP138
Getting Started . . .
6. Fix the brake wire (25) with the wire clip (8) to the lower handle bar (7) (Fig. 6).
6
25 8
7
Grass catcher assembly
1. Attach the grass catcher’s bag to it’s frame (Fig. 7).
7
22
Grass catcher installation
Always carry the grass catcher (22) by its handle (22b).
1. Lift the rear deector guard (21) and hold it in place (Fig. 8, step 1).
2. Align the hooks (22a) with the rod to hang it onto (Fig. 8, step 2).
3. Carefully release the rear deector guard (21) afterwards.
8
21
22b
22a
22
1
2
Fuel and engine oil
This product is equipped with a 4-stroke engine. Before operation, it is necessary to add
suitable fuel and engine oil separately.
1. Place the product on a stable, level surface. We recommend laying a non-ammable
sheet under the product.
2. Use proper funnels. Avoid spilling and overlling the tanks.
WARNING! Fuel and oil are highly inammable! Fumes will explode if lit!
Ensure that there are no naked ames around the product! Do not smoke
while lling fuel and oil!
3. Always dispose of fuel, used oil and objects contaminated with them in accordance
with local regulations.
Before you start
3663602423287-GB-V04.indd 20 27/9/2018 14:54