Barco Cine VERSUM 80 User manual

Sponsored by
D
D
M
M
This user manual isprovided asa free service by FixYourDLP.com. FixYourDLP isin no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com(http://www.xyourdlp.com) isthe World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.xyourdlp.com
Video Guides: http://www.xyourdlp.com/guides
User Forums: http://www.xyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.xyourdlp.com/counterfeits
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsors:
Sponsors:
Disclaimer
Disclaimer

BARCO PROJECTION SYSTEMS
R9841650
08102002
INSTALLATION MANUAL
Table Mount for Cine Versum Projectors
Art. No.: R5976500Rev: 00
Table Mount Kit
Cine Versum 80
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

Due to constant research, the information in this manual is subject to change without notice.
Produced by BARCO NV, Oct. 2002.
All rights reserved.
Trademarks are the rights of their respective owners.
BARCO n.v./Projection Systems
Noordlaan 5
B-8520 Kuurne
Belgium
Tel : [phone]
Fax : [phone]
E-mail : [email protected]
Visite Barco at the web : http://www.barco.com
Printed in Belgium
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

BARCO ——————————————————— 3————————————— Projection Systems
Safety Guidelines
Caution This frame is designed for use only with
the Barco Cine Versum series projectors.
Use with other appliances may result in
instability causing possible injury.
Warning The table should be capable of supporting
a weight of at least 25 kg (55LB)
Improper installation may result in serious
personal injury and damage to the projector.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

BARCO ——————————————————— 4————————————— Projection Systems
Description and Contents of the kit
Purpose of the Kit The kit is designed for the Cine Versum series projectors and allows the projector to be
mounted on the table.
Illustration of the
table mount
Contents of the
Kit Following items are included.
- Kit R9841650: table mount
- Hexagonal nut spanner of 8mm
- Installation manual : R5976500
- Set of spacer, bearing and fastner
Remark Disassembled the above kit into two parts, the table plate and the base plate as shown.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

BARCO ——————————————————— 5————————————— Projection Systems
Mounting the
base plate to the
projector
Assemble the base plate to the projector as shown.
1
2
1
2
Fix the spacer and bearing on the underside of the projector
as shown.
While fixing the base plate to the projector take care that
the lead nut shaft passes through the bearing while assem-
bling. If necessary shift the lead nut by rotating the lead
shaft screw with the nut spanner.
Step Action Image
Illustrations
Mounting the Assembly
Screws shaft
This shaft should pass
through the bearing
Bearing
B358953
Spacer
R822216
Location of fixing the
spacers and bearing.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

BARCO ——————————————————— 6————————————— Projection Systems
Mounting the Assembly
What has to be
done Fix the base plate to the projector. Then fix the main table plate to the projector base plate as shown.
Necessary Tools Hexagonal key (n°4), flat screwdriver
Illustrations
Determine the position of installing the projector and place the required talbe or platform
in the correct place. This table should be strong enough to carry a load of 25kgs.
Centering the
table mount
Fix this plate to the base
plate with these four
screws.
Fix this base plate to the
projector with these 4, M5
screws.
Fix these legs at the end.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

BARCO ——————————————————— 7————————————— Projection Systems
Adjustments
What has to be
done Place and position the projector in the desired place and adjust the alignment as per the image requirement. The vertical tilt of the projector can be achieved by rotating the shaft
screw with the hexagonal spaner as shown.
Necessary Tools Nut spanner 8mm.
Illustrations
Adjust the projector alignments until the desired image is obtained. Tighten all the bolts
after the desired image is achieved.
Adjustment
i) Check the stability of the table mount.
ii) The installation is complete after a proper image at the desired place is
achieved.
Shaft screw
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES

Sponsored by
D
D
M
M
This user manual isprovided asa free service by FixYourDLP.com. FixYourDLP isin no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com(http://www.xyourdlp.com) isthe World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.xyourdlp.com
Video Guides: http://www.xyourdlp.com/guides
User Forums: http://www.xyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.xyourdlp.com/counterfeits
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsors:
Sponsors:
Disclaimer
Disclaimer