Dimmer
CH1: 255 CH2: 255
CH3: 255 CH4: 255
Exit
2 of 4
DMX Address: 001
1: 65535 2: 65535
3: 65535 4: 65535
Resolution: 16 bit
DMX Address: 001
CH1: 255 CH2: 255
CH3: 255 CH4: 255
RES: 8 bit Gamma
DMX Address: 001
DMX Setup
Test
System Exit
DMX Address: 001
DMX Setup
Test
System Exit
DMX Address: 001
DMX Setup
Test
System Exit
DMX Address: 001
DMX Setup
Test
System Exit
DMX Address: 001
DMX Setup
Test
System Exit
Resolution: 8 bit
Curve: Gamma
Factory Reset
Exit
Dimmer
CH1: 255 CH2: 255
CH3: 255 CH4: 255
Exit
Screen: ON+ADDR
Buzzer: ON
Contrast: 100
Exit
Resolution: 16 bit
Factory Reset
Exit
Resolution: 8 bit
Curve: Gamma
Factory Reset
Exit
Resolution: 8 bit
Curve: Gamma
Factory Reset
Exit
Device
Restore Default
RGB Skipping
Speed: 5
Bright: 100%
White: 100% Exit
RGB Gradual
Speed: 5
Bright: 100%
White: 100% Exit
7 Colors Strobe
Speed: 5
Bright: 100%
White: 100% Exit
White Strobe
Speed: 5
Bright: 100%
White: 100% Exit
7 Color Skipping
Speed: 5
Bright: 100%
White: 100% Exit
Resolution: 8 bit
Curve: 1/Gamma
Factory Reset
Exit
Resolution: 8 bit
Curve: Linear
Factory Reset
Exit
Screen: ON+ADDR
Buzzer: ON
Contrast: 100
Exit
Screen: ON+ADDR
Buzzer: ON
Contrast: 100
Exit
Screen: ON+ADDR
Buzzer: ON
Contrast: 100
Exit
Screen: ON+Black
Buzzer: ON
Contrast: 100
Exit
Screen: ON+ADDR
Buzzer: OFF
Contrast: 100
Exit
Screen: ON+ADDR
Buzzer: ON
Contrast: 90
Exit
Screen: OFF
Buzzer: ON
Contrast: 100
Exit
7 Color Gradual
Speed: 5
Bright: 100%
White: 100% Exit
SCREEN INTERFACE DIAGRAM
DMX Address
DMX Real Time Data
Resolution
DMX Address
DMX Real Time Data
Resolution Dimming Curve
Mail Display Interface
Press “M” key to enter the setting interface
FIG 1-A FIG 1-B
FIG 2
FIG 3
FIG 4 FIG 5 FIG 6
1
2
3
1
2
3
1 2 3 1 2 3
When “Dimmer” is flashing
press “▲” to enter sub-menu
DMX Address Setting
Range: 001~255
Switch Dimming CurveSwitch Resolution
Restore factory
settings, then return
to the main display
interface (FIG 1) after 2
seconds Screensaver not open Buzzer can be on or off
Screen contrast
is adjustable
Screensaver open
and black
Screensaver open
and display address
Dimming Range
001~255
6 Self-Test Dynamic Scene. Speed & Brightness & White LED Adjustable
Speed: Range: 1 - 8
Bright: Range: 10% - 100%
White: Range: 0 - 100%
Exit: Return to previous menu
Press “M” key to switch entries
Press “▲” or “▼” to adjust parameters
Long press “M” key to return to the main
display interface (FIG 1)
Exit: Return to the previous menu
The RFX-DMX-CV-DECODER will run the test scenes only when you enter “self-test” interface.
Screensaver enable time: undo for 2 min in the main display interface (Figure 1).
[Restore the default parameters]: In the main display interface (Figure 1), press the “M” button, the ”▲” button and the” ▼” button
simultaneously for a few seconds. The decoder will restore the default parameters and the screen will display “Device restore default”
for 2 seconds.
