Bartec 17-72V5 Series User manual

GmbH
Max
-
Eyth
-
Straße 16
Phone
:
[phone]
-
0
Conta t
:
97980 Bad Mergentheim
Fax
:
[phone]
-
119
support
-
polaris@
barte .de
Germany
User Manual - TRANSLATION
POLARIS Remote
POLARIS II Remote 22"/ Remote 19.1"
Type 1 - 2V5-….
ATEX Zone 2
ATEX Zone 21/Zone 22
Do ument No. 11-71V4-7D0001
Revision 1 / July, 26
th
, 2018
Reservation: Te hni al data subje t to hange without noti e. Changes, errors and
misprints may not be used as a basis for any laim for damages.
Contents Page
English 1 - 37

Table of Contents POLARIS Remote
POLARIS II Remote KVM
Te hni al data subje t to hange without noti e.
07/2018
1. Basic Safety Instructions.................................................................................................................... 1
1.1 Notes on this manual .................................................................................................. 1
Languages .................................................................................................................. 2
Changes to the do ument ........................................................................................... 2
1.2 Handling the produ t ................................................................................................... 2
1.3 Use in a ordan e with the intended purpose ............................................................ 2
1.3.1 Ex lusive purpose ........................................................................................... 2
1.3.2 Improper Use ................................................................................................... 2
1.3.3 Owner’s/Managing Operator’s Obligations ...................................................... 3
1.4 Safety Instru tions ...................................................................................................... 3
1.4.1 General Safety Instru tions ............................................................................. 3
1.5 Safety Instru tions for Operation ................................................................................ 3
1.5.1 Upkeep ............................................................................................................ 3
1.5.2 Maintenan e .................................................................................................... 3
1.5.3 Inspe tion ........................................................................................................ 4
1.5.4 Repairs ............................................................................................................ 4
1.5.5 Commissioning ................................................................................................ 4
1.6 Ex Prote tion Type, Certifi ation and Standards ........................................................ 4
1.7 Warranty ..................................................................................................................... 5
2. Product Description ............................................................................................................................ 6
2.1 Definition ..................................................................................................................... 6
2.2 Fo us on se urity .................................................. Fehler! Textmarke nicht definiert.
2.3 S hemati design ....................................................................................................... 7
3. Explosion protection and approvals .................................................................................................
3.1 Explosion prote tion ................................................................................................... 7
4. Technical Data ..................................................................................................................................... 8
4.1 General data ............................................................................................................... 8
4.1.1 Chara teristi s POLARIS Remote Zero Client PC 19,1" ................................. 9
4.1.2 Chara teristi s POLARIS Remote Zero Client PC 22" .................................... 9
4.1.3 Chara teristi s POLARIS Remote Zero Client PC 24"Fehler! Textmarke nicht definiert.
4.1.4 Kenndaten Tastatur Varianten ....................................................................... 10
4.1.5 Heating (Optional) for Version up to -20°C .................................................... 11
4.1.6 Speaker (optional) ......................................................................................... 11
4.2 Produ t Labelling ...................................................................................................... 12
5. Transport and Assembly .................................................................................................................. 13
5.1 Transport .................................................................................................................. 13
5.2 Intermediate Storage ................................................................................................ 13
5.3 Assembly .................................................................................................................. 13
6. Installation.......................................................................................................................................... 14
6.1 Requirements ........................................................................................................... 14
6.2 Me hani al installation .............................................................................................. 15
6.2.1 Floor mounting............................................................................................... 16
6.2.2 Wall mounting ................................................................................................ 16
6.2.3 Table mounting .............................................................................................. 17
6.2.4 Rotating/ In lining .......................................................................................... 17
6.3 Ele tri al Installation ................................................................................................. 18

Table of Contents POLARIS Remote
POLARIS II Remote KVM
Te hni al data subje t to hange without noti e.
04/2012
6.3.1 Installation guidelines .................................................................................... 18
6.3.2 PE ondu tor onne tion ............................................................................... 19
6.3.3 Conne tion ables ......................................................................................... 19
6.4 Jun tion Box ............................................................................................................. 20
6.4.1 POLARIS Jun tion Box ................................................................................. 21
6.4.2 Terminal assignment X1 ................................................................................ 21
6.4.3 Terminal assignment X1 with Heating HCS (optional) ................................... 22
6.4.4 Terminal assignment X2 ............................ Fehler! Textmarke nicht definiert.
6.4.5 Fibre-Opti Port (optional) ......................... Fehler! Textmarke nicht definiert.
6.4.6 Establishing the LAN onne tion ................................................................... 24
6.4.7 Terminal assignment in onforman e to T568BFehler! Textmarke nicht definiert.
6.5 EMC (Ele tromagneti Compatibility) ....................................................................... 26
6.5.1 Note ............................................................................................................... 26
6.5.2 Voltage supply (AC- and DC- variants).......................................................... 26
6.5.3 Ba k-up fuse ................................................................................................. 27
6.5.4 Interferen e suppression ............................................................................... 27
6.5.5 Shielding ........................................................................................................ 27
6.5.6 Conne tion of shielding ................................................................................. 27
6.5.7 Examples of Shielding Conne tions .............................................................. 28
. Commissioning.................................................................................................................................. 29
7.1 Final Inspe tion......................................................................................................... 29
8. Operation............................................................................................................................................ 30
8.1 Zero Client operating system ................................ Fehler! Textmarke nicht definiert.
8.1.1 General remarks ........................................ Fehler! Textmarke nicht definiert.
8.1.2 Fun tions ................................................... Fehler! Textmarke nicht definiert.
8.1.3 Des ription of fun tions ............................. Fehler! Textmarke nicht definiert.
8.1.4 RAM status ................................................ Fehler! Textmarke nicht definiert.
8.1.5 Tou h S reen ............................................ Fehler! Textmarke nicht definiert.
9. Troubleshooting ................................................................................................................................ 31
10. Maintenance, Inspection, Repair...................................................................................................... 32
10.1 Maintenan e intervals ............................................................................................... 32
10.2 Inspe tion ................................................................................................................. 32
10.3 Maintenan e and Repair Work ................................................................................. 32
10.3.1 Instru tions for Repairs .................................................................................. 33
11. Disposal.............................................................................................................................................. 33
12. Dispatch and Packaging Instructions ............................................................................................. 33
13. Accessories, Spare Parts ................................................................................................................. 34
14. Order Numbers .................................................................................................................................. 35
15. Additional Information ...................................................................................................................... 36
16. EU Konformitätserklärung ................................................................................................................ 3
Appendix:
De laration of Conformity
EC Type Examination Certifi ate
Operating Instru tions for HCS Radiator

- blank -

POLARIS Remote
POLARIS II Remote KVM
Basic
Safety Instructions
Te hni al data subje t to hange without noti e.
04/2012
1/34
1. Basic Safety Instructions
1.1 Notes on this manual
Please read carefully before commissioning the devices.
The user manual is a onstituent part of the produ t. It must be kept in the dire t vi inity
of the devi e and a essible at all times to installation, operating and maintenan e
personnel.
It ontains important notes, safety instru tions and test ertifi ates whi h are ne essary
for perfe t fun tioning when the devi es are being operated and handled.
The user manual is written for all people who arry out assembly, installation,
ommissioning and maintenan e work on the produ t, whereby the dire tives and
standards appli able to areas with a gas or dust atmosphere (2014/34/EU, EN/IEC
60079-17 and EN/IEC 60079-19) must be observed when doing su h work.
Familiarity with and stri t adheren e to the safety instru tions and warnings in this manual
are essential for safe installation and ommissioning. Careful handling and onsistent
observation of these instru tions an prevent a idents, personal injuries and damage to
property.
The illustrations in these operating instru tions serve to make the information and
des riptions more lear. They are not ne essarily true to s ale and may deviate slightly
from the a tual onstru tion of the devi e.
The BARTEC ompany reserves the right to arry out te hni al hanges at any time.
In no event will BARTEC ompany be responsible or liable for indire t or onsequential
damages resulting from the use or appli ation of this user manual.
Safety instru tions and warnings are spe ially highlighted in this manual and marked by
symbols.
DANGER
DANGER indi ates a hazardous situation whi h, if not avoided, will result in death or
serious injury.
WARNING
WARNING indi ates a hazardous situation whi h, if not avoided, ould result in death or
serious injury.
CAUTION
CAUTION indi ates a hazardous situation whi h, if not avoided, ould result in minor or
moderate injury.
ATTENTION
ATTENTION identifies a potentially damaging situation whi h, if not avoided, ould
damage the equipment or something in its environment.

Basic
Safety Instructions
POLARIS Remote
POLARIS II Remote KVM
2/37 Te hni al data subje t to hange without noti e.
04/2012
Important instru tions and information on effe tive, e onomi al and environmentally
ompatible handling.
Languages
The original user manual is written in German. All other available languages are translations
of the original user manual.
The user manual is available in German and English. If you require any other languages,
please ask BARTEC or request them when pla ing the order.
Changes to the document
BARTEC reserves the right to alter the ontents of this do ument without noti e. No
guarantee is given for the orre tness of the information. In ase of doubt, the German
safety instru tions shall apply be ause it is not possible to rule out errors in translation or in
printing. In the event of a legal dispute, the “General Terms and Conditions” of the BARTEC
group shall apply in addition.
The respe tive up-to-date versions of data sheets, manuals, ertifi ates, EC De laration of
Conformity may be downloaded from the “Automation Te hnology” produ t page at
www.barte .de or ordered dire tly from BARTEC GmbH.
1.2 Handling the product
The produ t des ribed in these operating instru tions has been tested and left the fa tory
in perfe t ondition as regards meeting safety requirements. To maintain this ondition and
ensure that this produ t operates perfe tly and safely, it may be used only in the manner
des ribed by the manufa turer. Appropriate transportation, suitable storage and areful
operation are also essential for the perfe t and safe operation of this produ t. The POLARIS
must be installed properly and se urely if it is to work perfe tly and orre tly.
The safe and perfe t mounting of the POLARIS is a pre ondition for faultless and orre t
operation.
1.3 Use in accordance with the intended purpose
1.3.1 Exclusive purpose
It is used ex lusively in ombination with operating devi es whi h satisfy the requirements
for Overvoltage Category I.
The POLARIS II Panel PCs have been designed spe ially for use in hazardous (potentially
explosive) areas in Zone 2 or Zones 21 and 22.
It is essential to observe the permissible operational data for the devi e being used.
1.3.2 Improper Use
Any other use is not in a ordan e with the intended purpose and an ause damage and
a idents. The manufa turer will not be liable for any use beyond that of its ex lusive
intended purpose.

POLARIS Remote
POLARIS II Remote KVM
Basic
Safety Instructions
Te hni al data subje t to hange without noti e.
04/2012
3/37
1.3.3 Owner’s/Managing Operator’s Obligations
The owner/managing operator undertakes to restri t permission to work with the POLARIS
to people who:
 are familiar with the basi regulations on safety and a ident prevention and have
been instru ted in the use of the POLARIS;
 have read and understood the do umentation, the hapter on safety and the
warnings.
The owner/managing operator must he k that the safety regulations and a ident
prevention rules valid for the respe tive appli ation are being observed
1.4 Safety Instructions
1.4.1 General Safety Instructions
 Take the devi e out of the hazardous area before wiping it with a dry loth or leaning
it!
 Do not open devi es in a hazardous area.
 The general statutory regulations or dire tives relating to safety at work, a ident
prevention and environmental prote tion legislation must be observed, e.g. the
German industrial health and safety ordinan e (BetrSi hV) or the appli able national
ordinan es.
 In view of the risk of dangerous ele trostati harging, wear appropriate lothing and
footwear.
 Avoid the influen e of heat that is higher or lower than the spe ified temperature range.
 Prote t the devi e from external influen es! Do not expose the devi e to any
austi /aggressive liquids, vapours or mist! In the event of malfun tioning or damage
to the en losure, take the devi e out of the potentially explosive area immediately and
bring it to a safe pla e.
1.5 Safety Instructions for Operation
1.5.1 Upkeep
For ele tri al systems the relevant installation and operating regulations must be omplied
with (e.g. Dire tive 2014/34/EU and the national appli able ordinan es EN 60079-14 and
the DIN VDE 0100 series)!
The disposal of this equipment must omply with the national regulations on the disposal of
waste.
1.5.2 Maintenance
Regular servi ing is not ne essary if the equipment is operated orre tly in a ordan e with
the installation instru tions and environmental onditions. In this ontext, please refer to
Chapter "Maintenan e, Inspe tion, Repair".

Basic
Safety Instructions
POLARIS Remote
POLARIS II Remote KVM
4/37 Te hni al data subje t to hange without noti e.
04/2012
1.5.3 Inspection
Under IEC 60079-19 and EN 60079-17, the owner/managing operator of ele tri al
installations in hazardous areas is obliged to have these installations he ked by a qualified
ele tri ian to ensure that they are in a proper ondition.
1.5.4 Repairs
Under EN/IEC 60079-17 and EN/IEC 60079-19, the owner/managing operator of ele tri al
installations in hazardous areas is obliged to have these installations he ked by a qualified
ele tri ian to ensure that they are in a proper ondition.
1.5.5 Commissioning
Before ommissioning, he k that all omponents and do uments are there.
1.6 Ex Protection Type, Certification and Standards
Markings spe ifying Ex prote tion and ertifi ation are put on the devi e. For Ex prote tion
markings, see hapter 4 "Te hni al Data ".
The POLARIS II Panel PCs onform to Dire tive 2014/34/EU for devi es and prote tive
systems for use to their intended purpose in potentially explosive areas (ATEX Dire tive).
For the standards onformed to, see Chapter 3 "Explosion prote tion and approvals".

POLARIS Remote
POLARIS II Remote KVM
Basic
Safety Instructions
Te hni al data subje t to hange without noti e.
04/2012
5/37
1. Warranty
WARNING
If components other than those specified are used, protection against explosion
can no longer be assured.
 Do not take any modifi ations or onversions on devi e.
 Use only original spare parts parts.
The manufa turer grants a omplete guarantee only and ex lusively for the spare parts
ordered from him, the manufa turer.
As a fundamental rule, our “General Conditions of Sale and Delivery” apply. These are
made available to the owner/managing operator at the latest on formation of a ontra t.
Guarantee and liability laims for personal injury and damage to property are ex luded if
they are due to one or more of the following reasons:
 Use of the POLARIS for a purpose other than that for whi h it is intended.
 In orre t installation, ommissioning, operation and maintenan e.
 Non- omplian e with the instru tions in the manual with respe t to transport,
storage, assembly, ommissioning, operation and maintenan e.
 Stru tural modifi ations without our prior authorisation.
 inadequate monitoring of omponents that are subje t to wear
 Repairs done in orre tly.
 Disasters due to the effe ts of foreign matter or A t of God (events outside human
ontrol).
We guarantee the POLARIS and its a essories for a period of 1 year starting from the
BARTEC delivery date. This guarantee overs all parts of the delivery and is restri ted to
the repla ement free of harge or the repair of the defe tive parts in our Bad Mergentheim
fa tory. As far as possible, the delivery pa kaging should be kept for this purpose. In the
event of su h a laim, the produ t must be returned to us after written arrangement. The
ustomer annot laim to have the repairs done at the site of installation

Technical Data POLARIS Remote
POLARIS II Remote KVM Analog
6/37
Te hni al data subje t to hange without noti e.
04/2012
2. Product Description
2.1 Definition
The POLARIS Remote KVM Analog devi e from BARTEC is a display, optionally with
keyboard, mouse and tou h s reen whi h an operate a server or PC in the safe era in
hazardous areas Zones 21 and Zone 2 and Zone 22.
Illustration 1: POLARIS II Remote in the stainless-steel enclosure, rotatable/inclinable with touchscreen,
It is onne ted to the server or PC easily and dire tly by means of the lo al unit already
in luded in the s ope of supply.
Illustration 2: e.g. local unit with S P cable
The POLARIS Remote KVM Analog series is optimised for signals su h as VGA /USB. A
lo al monitor an be onne ted via "VGA Out". The tou h s reen is onne ted via an
RS232 interfa e (the installation of a driver is ne essary and is ontained in the s ope of
delivery).

POLARIS Remote
POLARIS II Remote KVM Analog Technical Data
Te hni al data subje t to hange without noti e.
07/2018
7/37
2.2 Schematic design
Illustration 3: Simple system structure
3. Explosion protection and approvals
3.1 Explosion protection
POLARIS II
Typ 1 - 2V5-****
ATEX
Ex protection
(maximum marking)
II 3G Ex nA i IIC T5 G
II3(2)G (1)G Ex nA i [i ] [ib Gb) [op is Ga] IIC T4/5 G
II 2D Ex ib tb IIIC T100°C Db
-20 °C ≤ Ta ≤ 60 °C
Standards in a ordan e with
EMC Dire tive 2014/34/EU
EN 60079-0:2012 +A11:2013
EN 60079-11:2012
EN 60079-15:2010
EN 60079-28:2015
EN 60079-31 :2014
Certification IBExU 09 ATEX 1113 X
Special conditions High harging me hanisms at the operation surfa e
of the Visual units respe tively a essories (for
example pneumati parti le transport) must be
ex luded at the appli ation.
EU-Konformität
RoHS-Directive 2011/65/EU
Standards in a ordan e with
EMC Dire tive 2014/30/EU
EN 61000-6-2:2005
EN 61000-6-4:2007 + A1:2011
Safty (IP Code) EN 60529:1991 + A1:2000 + A2:2013
Produktkennzeichnung 0044

Technical Data POLARIS Remote
POLARIS Remote KVM Analog
8/37
Te hni al data subje t to hange without noti e.
07/2018
4. Technical Data
4.1 General data
Construction Stainless steel en losure
Connection to the PC
(Local Unit)
Dire t onne tion to VGA
USB for Keyboard & Mouse
RS 232 for Tou hs reen
Extension by means of an STP/S 4x2x23 AWG
data ommuni ation able
Conductor length up to 200 m with resolution 1680 x 1050
up to 300 m with resolution up to 1280 x 1024
POLARIS Remote II Terminal for
STP able
Optional USB for keyboard & mouse
(Version with keyboard and mouse)
Rated voltage AC 110 to 230 V, 47 to 63 Hz
DC 24 V
Input voltage range AC 90 V to 253 V optional
DC 24 V ± 10 %
Max. power consumption P
max.
< 75 W
Admissible ambient temperature Storage -25 °C to +60 °C
Operation 0 °C to +50 °C
Relative air humidity 5 to 95 % non- ondensing
Material Stainless steel
Protection class IP65
Optional accessories Keyboard with integrated tra kball 38 mm
Keyboard with integrated tra kball 50 mm
Keyboard with integrated tou hpad
Optional Tou hs reen

POLARIS Remote
POLARIS II Remote KVM Analog Technical Data
Te hni al data subje t to hange without noti e.
07/2018
9/37
4.1.1 Characteristics POLARIS Remote PC 19,1"
Display 19.1" graphi s- apable TFT display
SXGA resolution 1.280 x 1.024 pixels
16.7 million olours
Brightness 300 d/m
2
Visible surfa e approx. 376 x 301 mm
Contrast1300:1
Backlight LED te hnology, Servi e life
approx... 50.000 hours at +25 °
Dimensions
(width x height x depth)
Display unit
610 mm x 450 mm x a. 100 mm
With Mounting adapter and keyboard
730 mm x 520 mm x 400 mm
Masse a. 17 kg
4.1.2 Characteristics POLARIS Remote PC 22"
Display 22" graphi s- apable TFT display
WXGA resolution 1.680 x 1.050 pixels
16.7 million olours
Brightness 300 d/m
2
Visible surfa e approx. 474 x 296 mm
Contrast1000:1
Backlight LED te hnology, Servi e life
approx... 50.000 hours at +25 °C
Dimensions
(width x height x depth)
Display unit
610 mm x 450 mm x a. 100 mm
With Mounting adapter and keyboard
730 mm x 520 mm x 400 mm
Masse a. 17 kg

Technical Data POLARIS Remote
POLARIS Remote KVM Analog
10/37
Te hni al data subje t to hange without noti e.
07/2018
4.1.3 Kenndaten Tastatur Varianten
Variants Keyboard with integrated Tou hpad
Keyboard with Tra kball 38 mm
Keyboard with Tra kball 50 mm
Material (conditionally UV-resistant) Polyester foil of Aluminium plate mounted in
stainless steel en losure
Protection class IP65 (statis h)
Wight a. 2 kg
Other features Keyboard available in various languages
Abmessungen (mm)
width: 500 mm

POLARIS Remote
POLARIS II Remote KVM Analog Technical Data
Te hni al data subje t to hange without noti e.
07/2018
11/37
4.1.4 Heating (Optional) for Version up to -20°C
Type HCS 40
Ex protection type II 2G Ex db IIC T4
II 2D td IIIC T135°C
Product marking
Certification PTB 03 ATEX 1139 X
Material Bla k aluminium
Power AC 230 V
Power 50 W
Dimensions
(width x height x depth)
52 mm x 50 mm x 155 mm
Switching Via external thermostat
Swit h on +10°C
Swit h of +18°C
Is fa tory installed,
The Ex marking of the POLARIS II Panel PC hanges with the built-in heater.
The temperature lass hanges from T5 to T4.
4.1.5 Speaker (optional)
Technical Details:
Type Internal abinet speaker
connect Internal Audio
Mounting Internel abinet plate
Fa tory built in

Technical Data POLARIS Remote
POLARIS Remote KVM Analog
12/37
Te hni al data subje t to hange without noti e.
07/2018
4.2 Product Labelling
Type label
example

Commissioning POLARIS Remote
POLARIS II Zero Client
13/37
Te hni al data subje t to hange without noti e.
04/2012
5. Transport and Assembly
5.1 Transport
CAUTION
This device is heavy (approx. 1 kg).
There is a risk of injury if it is lifted or moved incorrectly.
 You will need help from others when transporting it.
5.2 Intermediate Storage
ATTENTION
Incorrect storage can cause damage!
 Comply with the orre t storage temperatures.
 Keep the POLARIS free of moisture.
5.3 Assembly
Before assembling the devi e, make sure you have all the omponents and do uments.
Scope: 1 x POLARIS II Remote
1 x Lo al Unit
1 x onne tion able VGA / USB
1 x RJ45-plug (Phoenix)
1 x Driver CD for tou hs reen
1 x User Manual POLARIS II Panel PC
Optional: Supporting system for floor, wall or table mounting
Not enclosed: Assembly material
Cable for voltage supply and data line
A written report of any transport damage or missing items must be given to the appointed
forwarder and to BARTEC GmbH immediately on re eipt of the delivery.
BARTEC GmbH’s warranty onditions do not over damage aused by in orre t storage.
Required Tools: 1 x Allen key 5 mm
(to fix the supporting system in pla e)
1 x Allen key 2,5 mm
(to open ba k plate, jun tion box)
1 x Allen key 4 mm
(Grounding s rew, en losure)
1 x Allen key 3 mm
(to mounting keyboard)

Technical Data POLARIS Remote
POLARIS Remote KVM Analog
14/37
Te hni al data subje t to hange without noti e.
07/2018
6. Installation
We re ommend setting up the omplete system under laboratory onditions and testing
it before it is permanently installed. If a long onne tion able is not available, please use
a pat h able to test the basi fun tions.
DANGER
Electrostatic charging through a stream of particles.
There is a risk of fatal injury in an explosive atmosphere!
 Make sure there are no highly energeti harging me hanisms at the user interfa e
on the display unit or its a essories.
 Do not install the devi e in the stream of parti les.
DANGER
No PE connection.
Risk of fatal injury in an explosive atmosphere!!
 The POLARIS must be integrated in the equipotential bonding.
6.1 Requirements
 The surfa e underneath and the fastening means for the supporting system must be
designed to support the weight of the POLARIS (approx. 17 kg).
 Choose the optimum height for operating the POLARIS.
 Ensure good lighting onditions for a perfe tly legible display (no dire t exposure to
the sun’s rays).
 Do not mount in dire t proximity to swit hing or urrent hanging devi es.
 Do not install the devi e in the stream of parti les.
 The POLARIS must be integrated in the equipotential bonding.
 At ambient temperatures below 0 °C, the POLARIS has to be heated (Heating on
request).
 The supply and data line(s) are laid in the supporting system.
 The supporting system is fastened by means of the flange plate (see the following
illustrations).