Bartscher FO4P User manual

INSTRUCTIONS MANUAL
MULTIPLE-PURPOSE BURNERS
WITH INTEGRATED SUPPORTS
FOR OUTDOOR USE
FO4P FO3P
NOMINAL CAPACITY: kW 7,25 g/h 527
GAS : G30/G31 30 mbar
INJECTORS : 140
CATEGORY: I 3B/P
Read the instructions before using the appliance and keep them
105.4503

INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
-The appliance runs on BUTANE or PROPANE gas at 30 mbars.
-The appliance and gas cylinder have to be placed on a flat surface in places far from
inflammable materials.
-Protect the cylinder and the appliance from direct sunlight
-Cylinder must not be kept in the home, in an airless interior or underground
-ATTENTION: do not move the appliance when in use or when it is still warm.
-Change gas pipes that have deteriorated and replace them before the expiry date
imprinted on the pipe. Pipes must not be dented in any parts and must be installed in
such a way that they do not have to be placed under any strain. THEY MUST NOT
COME INTO CONTACT with any hot part.
-Repairs and maintenance shall be performed by skilled staff
-All changes to the appliance may be harmful.
-FOR OUTDOOR USE ONLY
The air needed for combustion is 2.0 m³/h for each kW of nominal capacity.
IF YOU SMELL GAS:
- Turn the burner off
- Close the appliance’s gas supply (cylinder tap)
- Call the gas supplier or a skilled person
- The support should not made of inflammable material and shall resist temperatures
of at least 90°C.
CONNECTION – REPLACONNECTION – REPLA
CONNECTION – REPLACONNECTION – REPLA
CONNECTION – REPLACEMENT OF GAS CYLINDERCEMENT OF GAS CYLINDER
CEMENT OF GAS CYLINDERCEMENT OF GAS CYLINDER
CEMENT OF GAS CYLINDER
Connection of the appliance to the cylinder shall be done by:
-BUTANE or PROPANE gas, minimum camping cylinder 3 Kg BUTANE
-Pressure retainer of 30 mbar BUTANE and PROPANE, with a capacity of 1.0 kg/h
minimum
-Flexible pipe in accordance with the regulations in force with a maximum length of
1.5 m
-Spray of foaming liquid to check gas leaks.

CONNECTION OF CYLINDER TO APPLIANCE (FIG. 1)
A) Check that the cylinder tap’s connection joints are in good order;
B) Connect pressure retainer to the cylinder ;
C) Check that the appliance tap is closed;
D) Connect pipe to the pressure retainer and to appliance connection (ringed end). Secure
pipe with a fastening band.
E) The cylinder must be changed outdoors and far from heat sources.
Close cylinder with plug and place in an appropriate area.
F) Use spray or foaming liquid to check there are no gas leaks
TURNING BURNER ONTURNING BURNER ON
TURNING BURNER ONTURNING BURNER ON
TURNING BURNER ON
FIG. 1
-Open cylinder by turning the tap counter clockwise
-Turn adjustment control left and bring flame close to the burner
-Adjust flame according to cooking speed. For highest flame turn the control knob
entirely left.

TURNING BURNER OFFTURNING BURNER OFF
TURNING BURNER OFFTURNING BURNER OFF
TURNING BURNER OFF
When cooking is complete turn the control all right and close gas cylinder
USING PANS
Pans should be a minimum of 25 cm and a maximum of 50 cm in diameter.
The flame should never come round the sides of the pan.
CLEANING – MAINTENANCECLEANING – MAINTENANCE
CLEANING – MAINTENANCECLEANING – MAINTENANCE
CLEANING – MAINTENANCE
1) Clean the appliance each time it is used
2) The surfaces shall be cleaned with a damp sponge and detergent
3) Never leave salty liquids on the surface
4) ATTENTION: never use abrasive detergents
5) To clean burners: use a damp sponge and soap or a special detergent
6) If the burner is not used for a prolonged period of time, replace in its package and
keep in a dry and clean area
7) If the burner and Venturi holes are blocked never use metallic objects to unblock
them. The diameter of the holes could be changed, thus causing the appliance to
malfunction. For example use compressed air.
8) For any technical problem contact the installer or a skilled technical expert
9) Only a skilled technical expert can replace the parts of the burner.
REV.0.FO.1