Bartscher CI20 User manual

CI20 / 100288C
CI40 / 100289C
Original-Gebrauchsanleitung
V1/0617

DEUTSCH
-----------------------------------------
Seite 1 bis 20
ENGLISH
-----------------------------------------
from page 21 to 40
FRANÇAIS
-----------------------------------------
de page 41 à page 60
NEDERLANDS
-----------------------------------------
blz. 61 t/m 80
ESPAŇOL
-----------------------------------------
de la página 81 a la 100
PORTUGUÊS
-----------------------------------------
as páginas des de 101 até 120
ITALIANO
-----------------------------------------
pagine da 121 a 140
ČESKY
-----------------------------------------
stránka 141 až 160
POLSKI
-----------------------------------------
strony od 161 do 180
РУССКИЙ
-----------------------------------------
страница 181 до 200

- 21 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 22
1.1 Key to symbols..................................................................................................... 22
1.2 Safety instructions................................................................................................ 23
1.3 Proper use............................................................................................................ 28
2. General information................................................................................................ 29
2.1 Liability and Warrantees....................................................................................... 29
2.2 Copyright protection ............................................................................................. 29
2.3 Declaration of conformity...................................................................................... 30
3. Transport, packaging and storage......................................................................... 30
3.1 Delivery check...................................................................................................... 30
3.2 Packaging............................................................................................................. 30
3.3 Storage................................................................................................................. 31
4. Technical data ......................................................................................................... 31
4.1 Technical specification ......................................................................................... 31
4.2 Overview of parts ................................................................................................. 32
5. Installation and operation....................................................................................... 34
5.1 Installation............................................................................................................ 34
5.2 Operation.............................................................................................................. 35
6. Cleaning................................................................................................................... 39
7. Waste disposal........................................................................................................ 40
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK

- 22 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.

- 23 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
The device can be used by children 8 years and up, as well as
by people with disabilities and those with limited experience/
knowledge as long as they are under supervision or have been
instructed on proper use of the device and its possible dangers.
Children should not play with the device. Cleaning and
maintenance cannot be performed by children younger than
8 years old and must be done under supervision. Children
under the age of 8 years old must be kept away from the
device and its power cord.
Never leave the device unattended when in use.
Only use the device indoors.
The device is not adapted for use with an external timer or
remote control.
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!

- 24 -
The device must be operated in correct and safe technical
condition only. In case of operational problems disconnect the
device from the power supply (pull the plug from the socket) and
contact the service company.
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions
below.
Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.
The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.

- 25 -
Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range.
Check the power cord regularly for damage. Do not use the
device if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified
electrician in order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Do not insert tools, cutlery into the device. Contact with metal
parts may cause short circuits and electric shocks. In addition,
the heating elements and the mechanism may be damaged.
Never immerse the appliance, the power cord and the power
plug in water or other liquids; do not put it under running water
and clean any parts of the appliance in the in the dishwasher.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.

- 26 -
HOT SURFACE! Risk of burns!
To avoid the hazard results please follow the safety instructions
below.
The appliance becomes very hot during operation! Avoid
contact with the hot surfaces of the appliance in order to
prevent burns of fingers or hands. Always use the operating
elements of the device.
Even after switching off the surfaces of the device remain hot
for quite some time, allow the appliance to cool down
sufficiently, before you clean it or move it to another place.
During operation never approach face, hands or other body
parts over the toast slots.
Be very careful when removing the toast slices because the
metal parts of the appliance and the bread will be very hot.
WARNING! Fire hazard!
Follow the safety instructions listed in order to avoid the hazard:
Slices of bread and other baked goods can ignite in the device.
Never operate the toaster under hanging cabinets, shelves, low-
hanging lamps, or near curtains table decorations or other
combustible materials or liquids such as e.g. gasoline, spirit,
alcohol, etc.
In order to avoid personal injuries or material damages by fire,
heat or electric shock do not put any cloths, paper, cardboard,
plastic or other objects on or under the appliance during its
operation.

- 27 -
Never cover the toaster slots with aluminium foil or other objects.
Never operate the appliance near heat sources and hot
surfaces (e.g. as heating, open fire places, stoves,
barbecue).
Never operate the appliance without the crumb tray and empty it
regularly. Make sure that the crumb tray is inserted correctly.
In the event of smoke occurrence during operation, immediately
stop the toasting process. Press the button „Cancel“ and
disconnect the appliance from the socket. Eliminate the cause.
Never attempt to extract the jammed slices of toast, bread, rolls
with a knife, fork or other objects; they may course an electric
shock in case of contact with current-carrying parts. Never put
hands in the toast slots, when the device is connected to the
power supply. Disconnect the device from the socket (pull the
power plug out!), let the appliance cool down before you remove
the bread slices. Never remove the slices of toast with force.
Do not use the appliance as a heat source.
When a fire arises unplug the power cord from the socket before
you initiate appropriate measures for fire-fighting. Provide
sufficient supply of fresh air.
Caution: Never extinguish the fire with water when the power
plug is connected to the socket. Electric shock hazard!

- 28 -
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The device is not designed for continuous operation in the industrial applications.
The device is intended for home use or in similar places such as:
in factory kitchens, in shops, offices and other similar working environments;
in agricultural farms;
by guests of hotels, motels and other typical places of accomodation;
in Bed and Breakfast facilities.
The toaster is intended only for toasting or reheating of bread or bread roll products.
Do not use the toaster among others for:
-baking of bread rolls;
-toasting of spread slices of bread (e.g. sandwiches), bakery goods with
filling or coating (e.g. jam or icing).
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 29 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.

- 30 -
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.

- 31 -
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-do not store outdoors,
-keep it dry and dust-free,
-do not expose it to aggressive media,
-do not expose it to direct sunlight,
-avoid mechanical shocks and vibration,
-in case of longer storage (> 3 months) make sure you check the state
of the packaging and the parts regularly, if required refresh or renew.
4. Technical data
4.1 Technical specification
Name
Toaster CI20
Toaster CI40
Code-No.:
100288C
100289C
Material:
stainless steel, brushed
Realization:
Functions: toasting, bagel toasting, defrosting, warming up
Pilot light(s)
Power:
0,88 kW / 230 V 50 Hz
1,48 kW / 230 V 50 Hz
Browning levels:
1 - 6
Dimensions:
W 195 x D 300 x H 200 mm
W 330 x D 300 x H 200 mm
Slot size:
140 x 35 mm
Accessories:
1 crumb tray
2 crumb trays
Weight:
1,85 kg
3,1 kg
We reserve the right to make technical changes!

- 32 -
4.2 Overview of parts
100288C
Operating elements
1
Self- adjustable toast guides
2
Extra-wide toast slots (2)
3
Housing
4
Removable crumb tray
5
Operating lever
6
Button „Cancel“
7
Button „Reheating“
8
Button „Bagel“
9
Button „Thawing“
10
Browning stage regulator
1
4
2
3
9
7
8
5
6
10

- 33 -
100289C
Operating elements
1
Self- adjustable toast guides
6
Button „Cancel“ (2)
2
Extra-wide toast slots (4)
7
Button „Reheating“ (2)
3
Housing
8
Button „Bagel“ (2)
4
Removable crumb tray (2)
9
Button „Thawing“ (2)
5
Operating lever (2)
10
Browning stage regulator (2)
4
2
3
9
9
10
10
7
7
8
8
5
6
6
5

- 34 -
5. Installation and operation
5.1 Installation
Positioning
Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate or any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never place the device in humid or wet environment.
Never place the device on the flammable surfaces.
Never place the device at the edge of the table, it could tip or fall down.
The installation surface must be easily accessible and sufficiently large. In order to
enable comfortable operation e of the device and ensure good air circulation, a
minimum distance of 20 cm to all sides must be kept.
Install the appliance device in such manner that the plug is accessible, so that the
appliance can be quickly disconnected from the power network if necessary.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

- 35 -
5.2 Operation
Preparation of the appliance
Before the first use of the appliance make sure that no packing materials or other
objects are in the toast slots.
Clean the appliance in accordance with the instructions in Section 6 „Cleaning“.
During the first use a light smoke resulting from the production residues can occur.
This is not a defect. Use the device during the first switching on without the toast
bread and set the middle level of browning. Make sure that there is sufficient
ventilation in the place of installation of the appliance.
Crumb tray
CAUTION!
In order avoid damage or contamination of the device, always put into
operation with the inserted crumb tray.
The extendable crumb tray of the toaster is
located under the appliance. The toaster
with 4 toast slots has 2 crumb trays.
Empty the crumb tray regularly. To this aim
pull it from the device and remove the
crumbs. Wipe the crumb tray with a soft moist
cloth and dry it thoroughly.
Make sure that the crumb tray is inserted
completely in the opening provided for it
Important tips for optimal toast result
The toast result depends in case of the same setting of the browning level on the
different characteristics of bread (moisture content, type of bread, the size and
thickness of the slices).
Set a lower browning level for dry bread, smaller and thinner slices, in case of
toasting of only one slice of bread.
Toasting of thick slices of bread requires more time for toasting, set a higher level
of browning or conduct 2 toasting operations.
The cut surface of the bread should be as smooth as possible in order to achieve
a uniform toast result. Remove loose crumbs or protruding bread components
(e.g. grains or raisins) before toasting because they can burn.

- 36 -
Bread with an irregular surface requires a higher level of browning.
Halve the bagels before toasting.
In order to achieve better toasting results, toast only one type of bread at the same
time in the respective pair of toast slots.
Take into account that during several operations one after another the toaster
becomes hot and the toast slices become darker accordingly.
Select possibly a lower degree of browning between the toast processes.
The level of browning can be changed according to the desire during the toasting
process through turning the browning regulator.
Toasting
1. Insert respectively only one slice of bread into
the toast slots.
2. Insert the power plug into the socket.
Note: The 4-slice toaster has separate operating
elements for each 2 toast slots. The following
operating steps apply to both Toast slot pairs.
3. Set by turning the browning regulator the desired
level of browning in the range of 1 - 6.
NOTE!
Turn the browning regulator clockwise for a darker browning
a brighter, counter clockwise for a brighter browning.
In case of the models for 4 toast slices 2 toast slots can be used each time for
simultaneous toasting of various types of bread. Set both browning regulators
accordingly.
Allow the device about 20 seconds to cool down after each toasting cycle,
before you insert further toast breads.
4. Press the operating lever down until it clicks. The toasting process begins. During the
toasting process it lights the control lamp of the button „Cancel“ .
5. When the toasting process is finished, the operating lever will automatically jump
upward. The control lamp of the button „Cancel“ turns off and the toast slices can
be removed.

- 37 -
WARNING! Hazards of burns!
Remove carefully the toast slices (bagels) from the toaster
because the metal parts of the appliance and the bread can
be very hot.
6. Disconnect the device from the socket (pull the power plug!), If it is no longer used.
Reheating of the already toasted bread
1. Perform the steps 1 - 4 of the section „Toasting“.
2. Press the button „Reheating“ . The toasting process begins and the control lamps
of the button „Cancel“ and „Reheating“ to light up.
3. As soon as the toasting process is finished, the operating lever will jump upward and
the control lamps of the button „Cancel“ and „Reheating“ cease to light up.
The toast slices can be taken.
Remove carefully the toast slices from the toaster. Hazards of burns!
NOTE!
In order to finish the toasting process prematurely, press the button „Cancel“ .
The operating lever jumps upward and the toast slices can be taken out.
4. Disconnect the device from the socket (pull the power plug!), if it is no longer used.
Bagel toasting
1. Cut the bagel with a sharp knife and Insert the
two halves in the toast slots with the cut side to
the middle.
2. Insert the power plug into a grounded single
socket.
3. Turn the browning regulator to the desired level
of browning in the range of 1 - 6.
4. Press the operating lever down until it clicks.

- 38 -
5. Press the button „Bagel“ . The toasting process begins.
During the toasting process the control lamps of the button „Cancel“
and „Bagel“ are lighting.
NOTE!
In case of selection of this function the bagels are toasted only on the inner
sides, not on the outer sides.
6. As soon as the toasting process is finished, the operating lever will jump upward and
the control lamps of the button „Cancel“ and „Bagel“ cease to light.
The bagels can be taken out.
Remove carefully the bagels from the toaster. Hazards of burns!
7. Disconnect the device from the socket (pull the power plug!), if it is no longer used.
Toasting frozen bread
1. Perform the steps 1 - 4 of the section „Toasting“.
2. Press the button „Thawing“ . The toasting process begins and the control lamps
of the buttons „Cancel“ and „Thawing“ are lighting up.
3. As soon as the toasting process is finished, the operating lever will jump upward and
the control lamps of the buttons „Cancel“ and „Thawing“ cease to light.
The toast slices can be taken out.
Remove carefully the toast slices from the toaster. Hazards of burns!
NOTE!
In case of selecting this function the toasting process lasts longer than in case
of simple toasting.
In order to finish the toasting process prematurely, press the button „Cancel“ .
The operating lever jumps upward and the toast slices can be taken out.
4. As soon as the thawing process is finished, the operating lever will jump upward
and the control lamps of the buttons „Cancel“ and „Thawing“ cease to light.
The toast slices can be taken out.
5. Disconnect the device from the socket (pull the power plug!), if it is no longer used.