
4. Cleaning and maintenance
During use, the sudden shutdown of vacuum cleaner, obvious attenuation of suction power
and obvious heating at the handle are usually caused by the dust blockage at filter. Please
clean the dust cup and filter regularly.
1. After turning off the vacuum
cleaner, rotate and remove the
dust collector
2. Take out the filter, pour out the
garbage from the dust collector and
then wipe it.
3. Rotate and separate the filter from
the metal filter mesh, and clean them
with a cleaning brush. It is recommen-
ded that the filter should be cleaned
after using the vacuum cleaner for 2-3
times.
4. After using the vacuum cleaner
for 5-6 times, it is recommended to
wash the filter with clean water,
and the filter should be installed
after it is completely dried.
5. Filter change
It is highly recommended to change the filter every three months for better experience and
powerful suction force. The filter can be changed more frequently if necessary.
6. Safety instructions
- Never use on wet surfaces.
- Never use on flammable or combustion materials.
- Never immerse the vacuum cleaner or the charging cable in liquid.
- Please stop using the vacuum cleaner immediately if there is any damage, such as broken shell,
missing parts, water penetration, abnormal noise, etc.
- This product is not be used by children without adult supervision.
- When using, please start the vehicle first to ensure suction power. This also ensures that the
vehicle's battery power is not drained.
- Use only the proper power cord included for this product.
- Please ensure that the filter is installed when using the vacuum cleaner.
- Do not block the exhaust port when vacuuming.
- The recommended storage and operating temperature range is 5°C to 35°C.
- Do not disassemble or repair the product without permission.