BassBoss SSP118 User manual

SSP118 Profundo Powered Subwoofer
Owner’s Manual
www.bassboss.com
©®2017 True Lee Loudspeakers, LLC – [email protected] – 512-368-3268 855-8-BASS-70 Toll Free

TABLE OF CONTENTS
Overview..................................................................................... 3
Technical Specifications............................................................ 4
Dimension Drawings ................................................................. 5
Frequency Response Graph ...................................................... 5
Safety nformation..................................................................... 6
Setup nstructions...................................................................... 7
Cardioid Switch .......................................................................... 8
Warranty..................................................................................... 9
Export Warranty......................................................................... 9
FCC Compliance Notice.............................................................. 10
Troubleshooting......................................................................... 11
Need more assistance? Support is available via phone or email.
Email: [e-mail]
Phone: [phone] toll free or 512-368-3268
Web Site: www.bassboss.com
SSP118 Profundo Powered Subwoofer
Owner’s Manual

Page 3
The SSP118 is a high-powered self-amplified single 18-inch
subwoofer designed to give you the low frequency output of
an average double 18” in a single 18” box.The SSP118
features a single 18-inch subwoofer enclosure with a high-
powered 2400 Watt Class-D amplifier.
Each SSP118 Powered Subwoofer gives you low frequency
output to 30 Hz, typical of an average double 18”, from a
single 18” box. Delivering output to frequencies lower than many
double 18” cabinets, each individual SSP118 enclosure does so with
nearly half the space and considerably less weight. This is a very
practical consideration from both a size and cost point of view. Each
SSP118 will give you more low-bass output than others of similar
size and price because it is designed to give you the low frequency
output of an average double 18” from a single 18” box.
For Mobile Professionals who provide superior sound quality,
the SSP118 allows you to deliver premium service with less
equipment and labor. With two SSP118 Subwoofers, you will have
the output of one of the worlds finest double-18" subwoofers, just
divided into two smaller, more manageable pieces.
Optimized for remarkably deep bass response from a cabinet
of manageable size, SSP118 Subwoofers are each loaded with
a single 18" long-excursion, neodymium motor, low frequency
driver. Each driver has a 4” voice coil and is rated for 1500W nominal
power handling, 3000W program power handling. Practically
impossible to blow drivers, thanks to the combination of extremely
rugged, very high power handling, long excursion drivers, carefully
optimized cabinet and port design and several effective but
transparent protection systems. The protection systems prevent
thermal overload of the voice coils and minimize long-term thermal
compression while having virtually no effect on the transient
response and peak output of the loudspeakers.
Extremely flat, delivering response that is +- 3.0dB from 30Hz
to 100Hz. o equalization is required to achieve this response.
Unlike designs that require equalization, the SSP118’s tone, response
and sensitivity are native to the design. Systems that require
processing to achieve their stated response are still subject to the
physical excursion and thermal limits of their drivers. Boosting low
frequency EQ to achieve extended low-frequency response results in
excessive distortion or woofer damage at full power unless limiting is
applied. The limiting necessary to prevent failure also prevents the
realization of their claimed frequency response at full power.The
SSP118 does not suffer from these limitations. It faithfully delivers
the low bass where most others either roll off or die trying.
Finished in extremely durable black textured weatherproof
polyurethane coating.A top-mounted pole socket in each SSP118
provides for mid-high loudspeakers to be mounted on a straight
speaker pole above the subwoofer.The enclosures also feature four
large rubber feet and corresponding recesses in their tops to facilitate
interlocking the boxes when stacked.The woofers' cones are made
from a waterproof fiber matrix which can withstand exposure to spills
and rain and can be wiped clean with a damp cloth.
SSP118 Profundo Powered Subwoofer
• So id, F at Response Down To 30 Hz
• Easy To Transport and Set Up
• Re iab e, Protected, Se f-Powered System
• Exce ent Output-To-Size Ratio
• 2400W RMS C ass D Amp ifier
• Powerfu , Loud, Deep Bass

Page 4
Performance
Loudspeaker Description: Single 18" Subwoofer
Frequency Response (±3 dB): 30-100Hz
Maximum Sustained Output: 130 dB SPL, 1m, 2pi, half-space, (ground stacked)
Short-term Peak Output: 136 dB
ominal Dispersion (°H x °V): 360 x 360
Enclosure Type: Direct radiating, vented enclosure, optimally tuned for low frequency response with
high sensitivity and high power handling
Transducers: 1 x 18 in. diameter (457 mm) woofer with 4 in. (100 mm) copper winding voice coil
and 56 mm (2.2") peak to peak excursion. Waterproof fiber composite cone
Cabinet Construction: 18mm Baltic Birch plywood. Equipped with 2 handles and interlocking rubber feet
Dimensions (H x W x D): 22.5" x 30" x 24" (23.25" high with feet)
et Weight: 125 lbs
Exterior Finish: Weatherproof bonded high-pressure polyurethane
Grill: Perforated, powder-coated steel
Suspension System: 16x 3/8-16 threaded flypoints
Physical
Cover: Heavy-duty padded nylon transport covers for 1 to 2 cabinets
Transport Dollies: Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 or 2 cabinets
Flying Hardware: Side-pull anchors and/or shoulder eyebolts
Installation Version: Available without handles and pole sockets
Amplification for Installation: Complete power package including DSP in two space rack chassis
Online Information: www.bassboss.com/ssp118
Amplification: 2400 Watt RMS Class D Amplifier
Processing: Integrated comprehensive DSP provides high pass, low pass, time alignment and limiting
Electrical Input Connector: eutrik Powercon input (Blue) AC3FCA
Electrical Connector, Mains EMA5-15 (Edison) or L530, upon request
Voltage Operating Range: 90-132VAC, 55-65Hz
Current Draw, ominal: 565 W, 4.7A
Signal Input Connector: XLR-F
Signal Output Connector: XLR-M pass-through only
Power
Optional

Page 5

Page 6
SAFETY NFORMAT ON
Important information regarding safety and the use of your loudspeakers:
ever stand in the immediate vicinity of loudspeakers driven at a high level.Professional loudspeaker systems are capable of causing a sound
pressure level detrimental to human health. Seemingly non-critical sound levels (from approx. 95 dB SPL) can cause hearing damage if
people are exposed to it over a long period. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone who is
exposed to these levels should use adequate protection devices.
When a transducer capable of producing high sound levels is being used,it is therefore necessary to wear ear plugs or protective earphones.
See the manual technical specifications to know the maximum sound pressure level.
In order to prevent accidents when setting up the loudspeakers or loudspeaker stands, make sure they are standing on a firm surface.
Ensure that all additional hardware, fixings and fasteners used for installation or mobile deployment are of an appropriate size and load
safety factor.
Pay attention to the manufacturers' instructions and to the relevant safety guidelines.
Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
Regularly check all load bearing bolts in the mounting devices.
Caution: Loudspeakers produce a static magnetic field even if they are not connected or are not in use. Therefore make sure when erecting
and transporting loudspeakers that they are nowhere near equipment and objects which may be impaired or damaged by an external
magnetic field. A distance of 3 feet (1m) should be maintained between loudspeakers and sensitive equipment such as CRT monitors or
magnetic storage media.
ever attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
Contact your dealer or BASSBOSS support if the product is not functioning properly.
BASSBOSS strongly recommends this product be installed by a qualified,professional installer who can ensure correct installation and certify
that is is installed in compliance with the regulations in force.
The entire audio system must comply with the current local standards and regulations regarding electrical systems.
MPORTANT NOTES
To prevent the occurrence of noise on signal cables, use shielded cables only. Avoid routing signal cables close to equipment that produces
high-intensity electromagnetic fields such as transformers, power cables and loudspeaker wires. Do not coil excess power cable. Do not coil
or wrap power cables and signal cables together.

Page 7
SET UP NSTRUCT ONS
1. Place loudspeaker in the desired location. Ensure that it is secure and stable.
2. Rotate the input attenuator knob counterclockwise to the lowest setting.
3. Connect signal from the sound source (mixer) via the XLR female input jack.
4. Connect the XLR male output to the next available loudspeaker input via an XLR cable (if applicable.) This is a full-range pass-through
connection and no processing is applied to this output.
5. Connect the eutrik PowerCO (blue) connector to the blue power inlet socket. Do not force. To insert, align the indexing tabs on the
connectors, insert the plug fully into the socket and rotate clockwise until the latches catch. To remove, pull back on the latch tab and
rotate the connector counterclockwise to the index stop, then pull outwards.
6. Work backwards from the speakers to the outlets, making all PowerCO connections before plugging in to mains power.
7. Connect the electrical plug to a power source.
8. Move the POWER switch to the O position.
9. Rotate the input attenuator clockwise to achieve the desired sound level.
The integrated DSP includes all the required processing for safe operation and alignment with the accompanying BASSBOSS top boxes. It is not
necessary nor advisable to use any third-party outboard processing with BASSBOSS powered loudspeakers. When connecting multiple
BASSBOSS loudspeakers in a system, signal can be passed through from one powered loudspeaker to another using XLR cables. o processing is
applied to the signal as it passes through from the input to the output connectors in each loudspeaker. Signal can be routed in any sequence
because each loudspeaker receives a full-range signal and applies the necessary processing in order to operate as part of the overall system. It
is recommended to run signal to the nearest box first and patch to the next nearest box in sequence. When connecting BASSBOSS speakers in a
system including other brands of loudspeakers, it's recommended to connect the BASSBOSS speakers first in sequence, then connect other
speakers to the pass-through outputs.This ensures that no inappropriate processing is applied to either loudspeaker.
The typical power draw of one BASSBOSS 2400W amplifier module is approximately 5A. With heavy demand, the current draw can peak at 20A
for brief periods but under EMA code, a 20A breaker should sustain a peak draw of 40A for several seconds without tripping. It’s recommended
to connect no more than two 2400W amplifier to an individual 20A circuit. In situations where circuits must be shared with other equipment or
other brands, it's recommended to power combinations of a BASSBOSS subwoofer and a top on a circuit and to power each subwoofer and top
combination on a separate circuit to reduce the chances of overdrawing a circuit and tripping a breaker.
OPERAT ON and CONTROLS
There are 2 control knobs on the amplifier.
1: GA N
Provides attenuation of the input from off to full output. Use appropriate gain structure to ensure the output feeding the subwoofer doesn't
reach clipping and distortion before maximum desired sound level is achieved.
The amplifier has a complement of limiters and safeties to protect itself and the driver however, if audible distortion occurs, lower the level of
the incoming signal.
2: EXO ADJUST
This control adjusts the effective crossover frequency allowing the subwoofer to be used with multiple sizes and styles of top boxes while
minimizing out-of-bandwidth noise and phase shift in the crossover region. Rotating the EXO knob fully counterclockwise (left) results in an
effective crossover frequency of 80Hz. Rotating it fully clockwise (right) results in an effective crossover frequency of 100Hz.

Page 8
3: CARD O D SW TCH
Toggle Switch allows selection between NORMAL mode and CARD O D mode.
With the switch in the ORMAL (up) position, the speaker is in normal operating mode and any number of cabinets can be arrayed side-by-side
facing the same way when they are all in ORMAL mode.
When CARDIOID operation is desired, one or two cabinets must be used in ORMAL mode and at least one cabinet must be placed in CARDIOID
mode and its position reversed relative to the other cabinet(s) The ideal ratio is 2 cabinets in ORMAL with one CARDIOID cabinet between them
vertically or horizontally.
Reduced NORMAL >> Audience
Level << CARD O D Audience
Area NORMAL >> Audience
The ORMAL mode cabinet(s) are used with the woofer facing towards the audience. The CARDIOID mode cabinet is rotated with the woofer
away from the audience and the CARDIOID SELECT SWITCH in the CARDIOID (down) position.
The cabinet in CARDIOID mode should have the EXO knob at the lowest level, rotated fully counterclockwise.
The EXO setting on the ORMAL mode cabinet(s) can be set to taste but all cabinets in ORMAL mode should be set the same.
ote: When the speaker is in CARDIOID mode, the green PWR LED is disabled because it will be facing the audience.. The speaker will still power up and play.
When only two cabinets are used, the cabinet in CARDIOID mode can be placed on top of the cabinet in ORMAL mode.The cabinet in CARDIOID
mode can also be placed adjacent to the ORMAL mode cabinet, with the ORMAL mode cabinets placed farther from the stage or area where
reduced level is desired. When only 2 cabinets are in use, the CARDIOID mode cabinet GAI should be reduced by 3dB. The greatest level
reduction occurs on axis with a line drawn from the center of the ORMAL cabinet's baffle, through the center of the CARDIOID cabinet's baffle.
Reduced
Level << CARD O D (-3dB) Audience
Area NORMAL >> Audience
Audience
Three-dimensional representation of cardioid output pattern.

Page 9
Thanks for your BASSBOSS purchase!
WARRANTY NFORMAT ON
Beyond ensuring your satisfaction, our extensive "Sound Defense" transferable warranty which covers all BASSBOSS products.
STANDARD CAB NET WARRANTY
BASSBOSS loudspeaker cabinet integrity, including all joinery,fasteners,handles and wood,is warranted against defects in materials and workmanship for a period
of six years from the date of purchase.This warranty does not cover items that are intended to wear and can be replaced if worn or damaged. Examples of items
not covered by this warranty are cabinet feet, grills and the finish or coating applied to the cabinet.
ENHANCED COMPONENT WARRANTY
BASSBOSS self-powered loudspeaker amps and electronic components are covered against failures due to defects in materials and/or workmanship for a period
of three years from the date of purchase. Speaker drivers and burned or open voice coils in subwoofers are covered for two years.
OUR SUPPORT
It is our goal to provide trouble-free loudspeakers.That objective begins as part of the design phase and continues on through to any service you may require.
In order to be able to provide the lowest possible failure rate, the best possible warranty service and the fastest turn-around time, we request that you contact
us immediately if you notice any problem with your system, and before you attempt any repairs. We can provide the best and fastest solution if we know the
details of the problem before any repair attempts are made. Often BASSBOSS technicians can troubleshoot problems that may arise and no repair or further
service will be necessary.
Warranty support is a service,and part of that service includes helping you prevent failures and minimize repair and shipping costs.Please do not ship products
without first obtaining a return authorization number by calling 512-368-3268 (855-822-7770 toll-free) or by emailing suppor[email protected]. BASSBOSS
service technicians will provide assistance and instructions on shipping and packaging requirements specific to your service needs.
WARRANTY L M TAT ONS
During the warranty period, if your loudspeaker malfunctions or fails due to any defect in components or manufacturing, the failed parts will be repaired or
replaced.This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Warranty coverage will be determined upon
inspection by BASSBOSS personnel. This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be
performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.
Purchaser is responsible for all costs of shipping and handling. Cosmetic damage is specifically excluded from this warranty. This warranty is rendered void if
service,repairs and/or modifications are attempted or made by anyone not specifically authorized by BASSBOSS to perform said services.Please contact BASSBOSS
or your local BASSBOSS dealer before attempting any repairs and before shipping parts in for service.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For more information concerning BASSBOSS
service and warranty policies please contact us at 512-36-3268 or [phone] toll-free.
EXPORT WARRANTY
BASSBOSS products can be purchased worldwide. In countries without local BASSBOSS distributors, product requiring service must be shipped back to the US
for warranty repairs. In most cases, the entire cabinet will not need to be shipped. Generally only the individual affected parts will need to be shipped to the
factory for servicing. Please contact BASSBOSS before attempting any repairs and before shipping parts in for service.
SH PP NG AND PACKAG NG
Please package your returns safely and securely. BASSBOSS does not cover damage that occurs in transit. Freight insurance is recommended.

Page 10
www.bassboss.com
©®2017 True Lee Loudspeakers, LLC – [email protected] – 512-368-3268 855-8-BASS-70 Toll Free
FCC COMPL ANCE NOT CE
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTIO : Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
OTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment gener- ates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EC DECLARAT ON OF CONFORM TY
Manufacturer:
BASSBOSS 9501 Cargo Ave Ste 600 Austin TX 78719
We declare that under our sole responsibility the product: SSP118 Subwoofer
Intended use: Professional Audio Loudspeaker
Are in conformity with the provisions of the following EC Directives,including all amendments,and with national legislation
implementing these directives:
• 2006/95/EC Low Voltage Directive
• 2004/108/EC Electromagnetic Compatibility Directive
• 2002/95/CE RoHs Directive

Page 11
www.bassboss.com
©®2017 True Lee Loudspeakers, LLC – [email protected] – 512-368-3268 855-8-BASS-70 Toll Free
TROUBLESHOOT NG
f, after following the above instructions for setup,you have no output from the loudspeakers, please check the following:
Verify that the green power (ON) LED is lit. f not, check the following:
(Note: The ON LED is disabled when CARD O D mode is selected.To check for power, switch to NORMAL mode to illuminate the LED)
1. s the power cord plugged into a live outlet?
2. s the Neutrik PowerCON connector rotated into the locked position?
3. s the Power Switch on?
f the green power LED is on, check the following:
1. s the signal cable connected to the input?
2. s the signal cable connected to an operating output at the other end?
3. s the signal flowing to the input? Check the integrity of the cable.
4. s the attenuator turned all the way down or at a very low level?
5. s the signal flowing to the input full-range? Filters in the signal may remove the operating frequencies
of the loudspeaker receiving them.
Need more assistance? Support is available via phone or email. Email: suppor[email protected]
Phone: [phone] toll free or 512-368-3268 Web Site: www.bassboss.com