Infinity Beta SW Series User manual

Beta™SW Series
SW-10 Subwoofer
PRELIMINARY SERVICE MANUAL
Infinity Systems, Inc.
250 Crossways Park Dr.
Woodbury, New York 11797

- CONTENTS -
BASIC SPECIFICATIONS …………………………………….…….……………..1
DETAILED SPECIFICATIONS ……………..……………………………….…..2
CONTROLS AND CONNECTIONS…………………………………….…..………..4
OPERATION….……………………………………………………………………..….6
EXTERNAL/MECHANICAL PARTS LIST …………….………………....……7
BLOCK DIAGRAM…………………………..…………………………………..…..…8
TECH TIP INFTT2003-04……………….………………………………………….....9
ELECTRICAL PARTS LIST (120v) ………………………………………………….10
ELECTRICAL PARTS LIST (230v) ………………………………………………….13
PCB DRAWINGS……………….…………..……………….…………………..….…17
SEMICONDUCTOR PINOUTS…………………………………….………….……..21
SCHEMATICS (120v)……………………………………………...………………...22
SCHEMATICS (230v)……………………………………………...………………...24
Basic Specifications
SW-10 Powered Subwoofer
Frequency Range: 30Hz – 150Hz (±3dB)
Max Amplifier Output: 300 watts RMS
Low-Frequency Driver: 10" (254mm) C.M.M.D.
Crossover Frequency: 50 -150 Hz (24dB/octave, continuously variable)
Dimensions (H x W x D): 15-3/4" x 13-3/16" x 14-3/4"
(400mm x 335mm x 375mm)
Weight: 37 lb (16.7 kg)
Infinity continually strives to update and improve existing products, as well as create new ones. The specifications
and construction details in this and related Infinity publications are therefore subject to change without notice.
1
SW-10

SW-10 75W Powered Sub/ Plate Amp
LINE VOLTAGE Yes/No Hi/Lo Line Nom. Unit Notes
US 120vac/60Hz Yes 108-132 120 Vrms Normal Operation
EU 230vac/50-60Hz Yes 207-264 230 Vrms Normal operation, MOMS required
Parameter Specification Unit QA Test Limits Conditions Notes
Amp Section
Type (Class AB, D, other) D n/a n/a
Load Impedance (speaker) 4 Ohms n/a Nominal
Rated Output Power 75 Watts 75 1 input driven
AVG RMS Dynamic Power 150 Watts 135 Average RMS power, 3/20 Cycles 50 Hz, Driven
6dB above its input sensitivity
THD @ Rated Power 0.5 % 122K filter 75 Watts
THD @ 1 Watt 0.2 % 0.5 22K filter
DC Offset 10 mV-DC 30 @ Speaker Outputs
Damping factor 35 DF 20 Measured at amplifier board Measured at the amplifier board THD < 0.1% - 75
Watts @ 50Hz
Input Sensitivity
Input Frequency 50 Hz 50 Nominal Freq.
L&R 128 mVrms ±2dB To 75 Watts, Ap Zo=600 Ohms Single input driven LP switch to Normal
LFE 128 mVrms ±2dB To 75 Watts, Ap Zo=600 Ohms Single input driven LP switch to LFE
Speaker/Hi Level Input 1.28 Vrms ±2dB To 75 Watts Single input driven, LP switch to Normal, This
applies to 230VAC model only
Signal to Noise
SNR-A-Weighted 95 dBA 85 relative to rated power A-Weighting filter
SNR-unweighted 80 dBr 75 relative to rated power 22k filter
SNR rel. 1W-unweighted 65 dBr 55 relative to 1W Output 22k filter
Residual Noise Floor 2 mVrms(max) 3
Volume @max, w/ A/P Swept
Bandpass Measurement (Line
freq.+ harmonics) (BW=20Khz) Line level inputs must be terminated using 1KOHM
Input Impedance Line Input 10K ohms n/a Nominal
Speaker/Hi Level Input >4.7K ohms n/a Nominal Applies to 230VAC model only
Filters
LP 4th order 60-150 Hz ± 10 2nd order variable, 2nd order fix
Subsonic HP 6th Order Fixed
LFE Low pass 2nd order fixed 200>LP<1K Hz
Speaker out HP filter 1st order fix
Left & Right 200 Hz ± 10 Speaker input - Spkr out 4 Ohms See AP curves (Applies to 230VAC model only)
Left & Right 100 Hz ± 10 Speaker input - Spkr out 8 Ohms See AP curves (Appies to 230VAC model only)
Limiter
THD at Max. Output Power YES n/a functional Maximum Output Power Limiter has no effect at maximum output power
Features --
Volume pot Taper (lin/log) LOG -- functional A Taper
HP Speaker input and output YES functional Refer to filter section (Applies to 230V model only)
Phase switch 0-180 deg functional
LP defeat switch (LFE-Normal) YES functional LFE function selection
Input/output Configuration
Line In (L, R or LFE) YES -- functional LR dual RCA jack
Spkr/Hi Level In YES functional Binding post connector L&R, applies to all models
Spkr/Hi Level Out YES functional Binding post connector L&R, applies to 230VAC
model only
Signal Sensing (ATO)
Auto-Turn-On (yes/no) YES functional
ATO Input test frequency 50 Hz functional
ATO Level Line Level Input 2 mV functional
ATO Level Speaker in 50 mV functional
ATO Turn-on time 5 ms functional Amp connected and AC on, then
input signal applied
Auto Mute/ Turn-OFF Time 15 minutes 18 T before muting, after signal is
removed Auto turn of time (T) must be 5 > T < 20 Minutes
Power on Delay time 3 sec. 4AC Power Applied
Transients/Pops
ATO Transient 5 mV-peak n/a @ Speaker Outputs
Turn-on Transient 50 mV-peak 2V-pk-pk @ Speaker Outputs AC Line cycled from OFF to ON
2
SW-10

Parameter Specification Unit QA Test Limits Conditions Notes
Turn-off Transient 50 mV-peak 2V-pk-pk @ Speaker Outputs AC Line cycled from ON to OFF
Efficiency
Efficiency 65 % 65 Nominal Line voltage 120 VAC / 230 VAC
Stand-by Input Power 12 Watts 15 @ nom. line voltage Auto turn of time (T) must be 5 > T < 20 Minutes
Power Cons. @ rated power 115 Watts 120 @ nom. line voltage 75 Watts @ 4 Ohms nominal line voltage
Protections
Short Circuit Protection YES functional Direct short at output Amplifier should resume operation after short
circuit condition removal
Thermal Protection YES functional @1/8 max unclipped Power
Temperature rise in accessible metal parts should
not exceed 35K rise for domestic version or 30K
rise for European versions (refer to requirements
sheet).
DC Offset Protection YES -DC present at Speaker Out leads
Design must insure no Offset at the speaker
output under any operating condition including
abnormal operation
Line Fuse Rating
US Domestic version 1.25 Amps 1.25 Type-T or Slo Blo-250 V Internal fuse with UL/CSA/SEMKO rated holder
EU 0.8 Amps 0.8 Type-T or Slo Blo-250 V, Low
Breaking capacity Internal fuse with UL/CSA/SEMKO rated holder
3
SW-10

SW-10
Rear Panel
CONTROLS AND CONNECTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CROSSOVER
FREQUENCY
LEVEL
LINE LEVEL IN
PHASE
Min Max
L
R
L R
For LFE use L or R
Green: On
Red: Stand-By
+ –
50Hz
0º
80Hz
150Hz
POWER
ON
¡
£
¢
∞
§
•
™
LFE NORMAL
180º
HIGH
LEVEL
IN
¶
AC 120V
60Hz 180W
OFF
WARNING: TO REDUCETHE RISK OF FIRE OR ELECTRICAL
SHOCK DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.
AVERTISSEMENT: POUR PRÉVENIR LES RISQUES D'INCENDIE OU DE CHOC
ÉLECTRIQUE, ÉVITER D'EXPOSER CET APPAREIL A LA PLUIE OU A L'HUMIDITÉ.
NRTL/C
CSA 22.2
UL1492
SW-10
¡Subwoofer-Level Control
™LFE/Normal Switch
£Phase Switch
¢Crossover FrequencyAdjustment
∞Line-Level/LFE Input
§Speaker-Level Inputs
¶Power Switch
•Status LED
4
SW-10

SW-10
SYSTEM CONNECTIONS
If your receiver/processor does
not contain a Dolby Digital or
DTS processor but has
subwoofer outputs:
Set line-level/LFE switch to
“Normal.”
NOTE: If your receiver/processor
has only one sub out,you may use
either the L or R input.
If you have a Dolby* Digital or
DTS®receiver/processor with a
low-frequency-effects (LFE) or
subwoofer output:
CROSSOVER
FREQUENCY
LEVEL
LINE LEVEL IN
PHASE
Min Max
L
R
L R
For LFE use L or R
LFE NORMAL
HIGH
LEVEL
IN
50Hz
0º 180º
150Hz
RECEIVER/AMPLIFIER
Front Speaker Output
80Hz
Green: On
Red: Stand-By
+ –
CROSSOVER
FREQUENCY
LEVEL
LINE LEVEL IN
PHASE
Min Max
L
R
L R
For LFE use L or R
LFE NORMAL
HIGH
LEVEL
IN
+ –
50Hz
0º 180º
150Hz
RECEIVER/PROCESSOR
80Hz
L R
Green: On
Red: Stand-By
CROSSOVER
FREQUENCY
LEVEL
LINE LEVEL IN
PHASE
Min Max
L R
For LFE use L or R
LFE NORMAL
50Hz
0º 180º
150Hz
SUBWOOFER OR
LFE OUTPUT
80Hz
Green: On
Red: Stand-By
Set LFE/Normal switch to“LFE.”
LOOSEN TERMINALS
INSERT BARE END;
TIGHTEN TERMINALS
1.
2.
BLACK =
–
NO STRIPE = – STRIPE = +
RED = +
This figure shows how to connect bare wires to the terminals.
If your receiver/processor does not have
subwoofer outputs for the left and right
channels or an LFE output,connect
speaker wire from your receiver/amplifier
to your speakers and subwoofer using
two sets of speaker wire:
5
SW-10

OPERATION
Power On
Plug your subwoofer’s AC cord into a wall outlet.Do not use the outlets on
the back of the receiver.
Initially set the Subwoofer-Level Control ¡to the“min”position.
Turn on your sub by pressing the Power Switch¶on the rear panel.
Turn on your entire audio system and start a CD or movie soundtrack
at a moderate level.
Auto On/Stand-By
With the Power Switch ¶in the ON position,the Status LED •on
the back panel will remain lit in red or green to indicate the
On/Standby mode of the subwoofer.
RED = STANDBY (No signal detected,Amp Off)
GREEN = ON (Signal detected,Amp On)
The subwoofer will automatically enter the Standby mode after approxi-
mately 10 minutes when no signal is detected from your system.The sub-
woofer will then power ON instantly when a signal is detected.During
periods of normal use,the Power Switch ¶can be left on.You may turn
off the Power Switch ¶for extended periods of nonoperation,e.g.,when
you are away on vacation.
Adjust Gain
Turn your Subwoofer-Level Control ¡up to the halfway position.If no
sound emanates from the subwoofer,check theAC-line cord and input
cables.Are the connectors on the cables making proper contact? Is the
AC plug connected to a“live”receptacle? Has the Power Switch ¶
been pressed to the“On”position? Once you have confirmed that the
subwoofer is active,proceed by playing a CD,record or cassette.
Use a selection that has ample bass information.
Set the overall volume control of the preamplifier or stereo to a comfort-
able level.Adjust the Subwoofer-Level Control ¡until you obtain a pleas-
ing blend of bass.Bass response should not overpower the room but
rather be adjusted so there is a harmonious blend across the entire musi-
cal range.Many users have a tendency to set the subwoofer volume too
loud,adhering to the belief that a subwoofer is there to produce lots of
bass.This is not entirely true.A subwoofer is there to enhance bass,
extending the response of the entire system so the bass can be felt as
well as heard.However,overall balance must be maintained or the music
will not sound natural.An experienced listener will set the volume of
the subwoofer so its impact on bass response is always there but never
obtrusive.
Phase Control
The Phase Switch £determines whether the subwoofer speaker’s piston-
like action moves in and out with the main speakers,0˚,or opposite the
main speakers,180˚.Proper phase adjustment depends on several
variables such as room size,subwoofer placement and listener position.
Adjust the phase switch to maximize bass output at the listening position.
Crossover FrequencyAdjustment
The Crossover FrequencyAdjustment ¢determines the highest frequency
at which the subwoofer reproduces sounds.If your main speakers can
comfortably reproduce some low-frequency sounds,set this control to a
lower frequency setting,between 50Hz and 100Hz.This will concentrate
the subwoofer’s efforts on the ultradeep bass sounds required by today’s
films and music.If you are using smaller bookshelf speakers that do
not extend to the lower bass frequencies,set the Crossover Frequency
Adjustment to a higher setting,between 120Hz and 150Hz.
NOTE:This control will have no effect if the LFE/Normal Switch ™is set
to LFE.If you have a Dolby Digital or DTS processor/receiver,the Low-Pass
Frequency is set by the processor/receiver.Consult your owner’s manual
to learn how to view or change this setting.
6
SW-10

EXTERNAL/MECHANICAL PARTS LIST
Ref. # Part Number Description Qty
1 Not For Sale SW-10 AMPLIFIER 1 EA
2 Not For Sale SW-10 CABINET 1 EA
3 351735-001 TRIM RING, 10"- SW-10 (BLACK) 1 EA
351735-002 TRIM RING, 10"- SW-10 (BEECH) (CHERRY)
4 333249-001 CUP, GRILLE (BLACK) 6 EA
333249-003 CUP, GRILLE (BEECH) (CHERRY)
5 351617-001 LOGO - SW-10 1 EA
6 338037-002 FOOT ASS’Y, RUBBER, BLK W/ THREADED INSERT 4 EA
7 900102-020 SCR, 8 X 3/4, PAN,PH,PB,BLK ZINC,LCS WFR 6 EA
8 63563 SCR, 6 X 3/4,PAN,PH,PB,BLK ZINC,LCS AMPLIFIER 10 EA
9 351510-001 WOOFER,10",SUB DCR = 3.4 ohms ±10% 1 EA
10 351732-003 ASY,GRILLE, BLK, FRNT, SW-10 (BLACK) 1 EA
351732-004 ASY,GRILLE, BLK, FRNT, SW-10 (BEECH) (CHERRY)
Package
Ref. # Part Number Description Qty
1 351732-003 ASY,GRILLE, BLK, FRNT, SW-10 (BLACK) 1 EA
351732-004 ASY,GRILLE, BLK, FRNT, SW-10 (BEECH) (CHERRY)
2 352144-001 MANUAL,OWNERS – SW-10 (120v) 1 EA
352144-002 MANUAL,OWNERS – SW-10 (230v)
3 352143-001 CARTON, OUTER – SW-10 120v (BLACK) 1 EA
352143-002 CARTON, OUTER – SW-10 120v (BEECH)
352143-003 CARTON, OUTER – SW-10 120v (CHERRY)
352143-004 CARTON, OUTER – SW-10 230v (BLACK)
352143-005 CARTON, OUTER – SW-10 230v (BEECH)
352143-006 CARTON, OUTER – SW-10 230v (CHERRY)
4 352145-001 PAD,END,TOP & BOT- SW-10 2 EA
5 352004-001 WARRANTY,CARD, 3/5YR,INFINITY 1 EA
6 338076-001 SPIKE FOOT SET 1 set
7
SW-10

SW-10
8

TECH TIPS
Troubleshooting tips and solutions to common service problems
For models: PS-10, PS-12, SUB750, SW-10 TIP# INFTT2003-04 Rev1
Subject: Replacing Output MOSFETS
In the event you need to replace MOSFET transistors Q18 or Q22 as part of a repair:
It is important to use ONLY the Infinity part# FE106401110, 316-0360503-001
or only the brands: International Rectifier, or Fairchild.
Replace both Q18 and Q22 MOSFET’s in the circuit, even if only one seems to be damaged.
Do NOT mix & match these components from different manufacturers, or batches. They should be
identical.
9
SW-10

SW-10 120V Electrical parts list
Part number Description Reference Designator
Resistors
216-0360503-000 Carbon Film Resistor 0R 1/4W J R10,11
216-0360503-000 MOF Resistor 1K 1W J KINK MO-100 R103
216-0360503-000 MOF Resistor 820R 3WS J 8x20 KINK R6,9
216-0360503-000 Resistor KNP 0R05 3WS J FK TYPE R104
216-0360503-000 SMD Resistor 10R 1/8W J 0805 R81,82
216-0360503-000 SMD Resistor 100R 1/8W J 0805 R62
216-0360503-000 SMD Resistor 1K 1/8W J 0805 R65,79,83,92,95,96,105,108
216-0360503-000 SMD Resistor 10K 1/8W F 0805 R20,21
216-0360503-000 SMD Resistor 10K 1/8W J 0805 R2,37,54,58,63,69,71,72,74,
216-0360503-000 SMD Resistor 100K 1/8W F 0805 R22-25
216-0360503-000 SMD Resistor 100K 1/8W J 0805 R3,112
216-0360503-000 SMD Resistor 10M 1/8W J 0805 R121
216-0360503-000 SMD Resistor 11K 1/8W F 0805 R98
216-0360503-000 SMD Resistor 11K3 1/8W F 0805 R34
216-0360503-000 SMD Resistor 1K2 1/8W J 0805 R51,53
216-0360503-000 SMD Resistor 1K3 1/8W F 0805 R35,110
216-0360503-000 SMD Resistor 13K7 1/8W F 0805 R42,43
216-0360503-000 SMD Resistor 137K 1/8W F 0805 R32
216-0360503-000 SMD Resistor 1K5 1/8W J 0805 R67,68,12-15
216-0360503-000 SMD Resistor 15K 1/8W J 0805 R29
216-0360503-000 SMD Resistor 20K 1/8W J 0805 R94
216-0360503-000 SMD Resistor 220R 1/8W J 0805 R90
216-0360503-000 SMD Resistor 2K2 1/8W J 0805 R1,87,61
216-0360503-000 SMD Resistor 22K 1/8W J 0805 R50,52,118
216-0360503-000 SMD Resistor 2M2 1/8W J 0805 R80
216-0360503-000 SMD Resistor 23K7 1/8W F 0805 R48
216-0360503-000 SMD Resistor 237K 1/8W F 0805 R45
216-0360503-000 SMD Resistor 243K 1/8W F 0805 R36
216-0360503-000 SMD Resistor 2K7 1/8W J 0805 R64,73
216-0360503-000 SMD Resistor 300R 1/8W J 0805 R55
216-0360503-000 SMD Resistor 30K 1/8W J 0805 R56
216-0360503-000 SMD Resistor 3K3 1/8W J 0805 R7,8,59
216-0360503-000 SMD Resistor 33K 1/8W J 0805 R5,122
216-0360503-000 SMD Resistor 3K32 1/8W F 0805 R26,27
216-0360503-000 SMD Resistor 3K6 1/8W J 0805 R28
216-0360503-000 SMD Resistor 3K9 1/8W J 0805 R93
216-0360503-000 SMD Resistor 39K 1/8W J 0805 R77
216-0360503-000 SMD Resistor 4K3 1/8W F 0805 R78
216-0360503-000 SMD Resistor 43K 1/8W J 0805 R4
216-0360503-000 SMD Resistor 45K3 1/8W F 0805 R30
216-0360503-000 SMD Resistor 47R 1/8W J 0805 R101,102
216-0360503-000 SMD Resistor 470R 1/8W J 0805 R76,99,100
216-0360503-000 SMD Resistor 4K7 1/8W J 0805 R85,86
216-0360503-000 SMD Resistor 47K 1/8W J 0805 R44,47,49,107
216-0360503-000 SMD Resistor 470K 1/8W J 0805 R70
216-0360503-000 SMD Resistor 4M7 1/8W J 0805 R60
216-0360503-000 SMD Resistor 5K6 1/8W J 0805 R40,41
216-0360503-000 SMD Resistor 60K4 1/8W F 0805 R39
216-0360503-000 SMD Resistor 620R 1/8W J 0805 R16,18,57
216-0360503-000 SMD Resistor 6K8 1/8W J 0805 R46,91
216-0360503-000 SMD Resistor 68K 1/8W J 0805 R31,33,66
216-0360503-000 SMD Resistor 9K09 1/8W F 0805 R38
216-0360503-000 VR FREQUENCY PN:RD163121R03D-20KBx2(EJ) VR2
216-0360503-000 VR 5KA LEVEL PN:RK163111R52B-5KA (EJ) VR1
Capacitors
216-0360503-000 SMD Ceramic capacitor. 0u01/50V K 0805 X7R C5,10,33,45,51,66,67
216-0360503-000 SMD capacitor. 100pF/50V J 0805 NPO C16,36,58
216-0360503-000 SMD capacitor. 0u1/50V K 0805 X7R C11,42-44,46-49,52,54,55,60,
63,71,74,77
216-0360503-000 SMD capacitor. 0u1/250V K 1206 X7R C3,7
10
SW-10

Part number Description Reference Designator
216-0360503-000 SMD capacitor 0u0015/50V K 0805 X7R C32
216-0360503-000 SMD capacitor. 220pF/50V J 0805 NPO C14,15,20,21,19
216-0360503-000 SMD capacitor. 3300pF/50V K 0805 X7R C40,34
216-0360503-000 SMD capacitor. 0u047/50V K 0805 X7R C62,59
216-0360503-000 SMD capacitor. 56pF/50V J 0805 NPO C57,61
216-0360503-000 SMD capacitor. 560pF/50V J 0805 NPO C56
216-0360503-000 END Mylar capacitor. 1uF/100V K P:10 C70,70B
216-0360503-000 NP capacitor. 200u/50V M (R)1321 P:5 C17,18
216-0360503-000 NPE capacitor. 4u7/50V K10 (R)8x13 SBE C73
216-0360503-000 NPEcapacitor. 6u8/100V K10 (R)1020 GNE C72
216-0360503-000 electrolytic capacitor. 10uF/25V M (R)0511 P:5 C35
216-0360503-000 electrolytic capacitor. 100uF/25V M (R)6.3x11 P:5 C64
216-0360503-000 electrolytic capacitor. 22uF/25V M (R)5x11 P:5 C39,50,53,41,4,9
216-0360503-000 electrolytic capacitor. 33uF/25V M (R)0511 P:5 C1
216-0360503-000 electrolytic capacitor. 330uF/16V M (R)0812 P:5 C12,78
216-0360503-000 electrolytic capacitor. 4u7/50V M (R)0511 P:5 C2
216-0360503-000 electrolytic capacitor. 47uF/16V M (R)0511 P:2.5 C37
216-0360503-000 electrolytic capacitor. 470uF/16V M (R)0812 P:5 C65
216-0360503-000 Electrolytic capacitor. SNAPIN 4700uF/50V M (R)2236 C6,8
216-0360503-000 MPE capacitor. P:5 0u1/100V J C68,69,27
216-0360503-000 MPE capacitor. P:5 0u22/63V J C25-26,29,31
216-0360503-000 MPE capacitor. P:5 0u33/63V J C22,23,24
216-0360503-000 MPE capacitor. P:5 0u047/63V J C28,30
216-0360503-000 Safety capacitor. (0u1/250V) PN:HQX0.1K275VACx2 18x6x12mm CXAC1
Semiconductors
216-0360503-000 Transistor NPN PN:MPSW06RLRA TO-92 (ON) Q2,Q16
216-0360503-000 Transistor PNP PN:MPSW56RLRA TO-92 (ON) Q3
216-0360503-000 Transistor NPN (ON SEM) PN:MPS2222ARLRA TO-92 Q21
216-0360503-000 Transistor PNP (ON) PN:MPS2907A RLRA TO-92 Q19,23
216-0360503-000 Transistor PNP(FAIRCHILD PN:2N5401 TO-92 Q1
216-0360503-000 Transitor NPN PN:2N5551 TO-92 Q17
216-0360503-000 Bridge Regulator PN:RS804 400V,8A BR1
216-0360503-000 IC;DIP, HALF-BRIDGE DRIVER PN:IR2111 8PIN (IR) U7
216-0360503-000 SMD DIODE PN:ES1D 200V 1A D5,26,29,33,38
216-0360503-000 SMD ZENER DIODE PN:BZX84C10 10V SOT-23 D35
216-0360503-000 SMD ZENER DIODE PN:BZX84C15 15V SOT-23 D6,7,9
216-0360503-000 SMD IC DUAL OP-AMP PN:TL072CDR SO-8 (TI) U5,6
216-0360503-000 SMD IC;(OP) QUAD OP-AMP PN:TL074CDR (TI) U2,3
216-0360503-000 SMD Transistor PNP PN:DTC114TKA SMT3 (ROHM Q7
216-0360503-000 SMD Transistor NPN PN:MMBT3904LT1 SOT23 (ON Q11,14,13,5,8,9
216-0360503-000 SMD Transistor PNP PN:MMBT3906LT1 SOT23 (ON Q6,10,12,15
216-0360503-000 SMD IC;(OP) DUAL OP-AMP PN:NJM4558M-TE3 DMP-8 U4
216-0360503-000 SMD ZENER DIODE PN:BZX84C5V6 5.6V SOT-23 TAPIN D24,36,37
216-0360503-000 SMD DIODE PN:LL4148 (Wishay) D1-4,8,10-23,27,30-31,34,39
216-0360503-000 SMD Transistor (PNP) PN:MMBT5401 LT1 SOT-23 Q20,24,26
216-0360503-000 SMD Transistor (NPN) PN:MMBT5551 LT1 (ON) Q25
316-0360503-001 LED (Cabinet) PN:LT-2402-21
316-0360503-001 Transistor NPN PN:TIP 31C TO-220 (MOSPEC) Q4
316-0360503-001 MOSFET N-Channel PN:IRF640N TO-220 (IR) Q18,22
Miscellaneous
216-0360503-000 BEAD COIL YT-10911 L5
216-0360503-000 INDUCTOR PN:YT-10033 30uH L2
216-0360503-000 INDUCTOR 324uH YT-10778 L4
216-0360503-000 INDUCTOR 56uH YT-10779 L1
216-0360503-000 TOROIDAL INDUCTOR 70uH YT-10682 L3
216-0360503-000 SMD FERRITE BEAD PN:321611 600R/100MHz 1206 FB1,FB2
216-0360503-000 RCA Connector SCJ-1020 2P(G) WHT,RED CONN1
216-0360503-000 Terminal (PCB TYPE) PC205 (t=0.8m/m) T205MA S-
216-0360503-000 Terminal (PCB TYPE) PC250(t=0.8),T250MA S+
216-0360503-000 Terminal T187MA(PCB TYPE) (t=0.8mm) PC187(0.8) AC1,AC3,T1,T2,AC2,SW2,SW4
216-0360503-000 CONNECTOR 2 PIN JS-1001-2 P:2.5mm CONN3A
216-0360503-000 Binding Posts High Level In/Out BP/IP,BP/OP
11
SW-10

Part number Description Reference Designator
216-0360503-000 FUSE CLIP P/N:CFFH1206
216-0360503-000 TOGGLE SW PN:L101-T2B4QE SW5,SW6
216-0360503-000 RELAY PN:943-1C-48D K1
216-0360503-000 FUSE;GSL UL/CSA FUSE;1.25A 250V 5x20mm F1
316-0360503-001 GASKET C4305 12x15 t=5mm CR PSA Thermister
316-0360503-001 GASKET (PB10/12) PN:L-32 200x20mm t=5mm PORON
316-0360503-001 GASKET (PB10/12) 200x20mm t=2mm CR4305 PSA COVER base
316-0360503-001 GASKET C4305 321x8 t=1mm CR PSA COVERx2
316-0360503-001 GASKET C4305 93x4 t=1mm CR PSA COVERx2
316-0360503-001 Thermister TSE-103 K L:50mm TH1
316-0360503-001 Power Transformer YT-10615-4 PT1
316-0360503-001 Knob ABS HTS-10/20 φ20x15m/m UL94V-0 BLK
316-0360503-001 Strain Relief P/N SB4F-2
316-0360503-001 RUBBER FOOT ID:6.2 OD:11.5 t=2mm 55 deg BLK
316-0360503-001 Mica 13x18mm TO-220 holeless
316-0360503-001 Bracket for transistor P/N:TRK-1
316-0360503-001 Panel 322x105.7x15mm BLK ABS-94V0
316-0360503-001 Bucket (PB-10/12) ABS 322x105.7x146.5mm BLK (94VO)
316-0360503-001 FIBER WASHER OD=8mm ID=3.2 t=1 (red) Heatsink x2
316-0360503-001 Gasket ID=5.1 OD=12 t=1m/m(zinc plated) X'FER x4
316-0360503-001 Heatsink, black anodized 70x42x20mm alum. (PB-10) screw
316-0360503-001 ROCKER SW (POWER) PN:RF1003-BB4-0
316-0360503-001 Wire set #26 UL1007 L=74mm blk/wht 2P HOUSING
316-0360503-001 UL Power Cord Double-Insulated SPT-2 BLK 6feet#18 one end T187terminal
316-0360503-001 Wire #16AWG UL1007 blk 480mm both ends T205transparent sleeve Out-
316-0360503-001 Wire #16AWG UL1007 grn 480mm both endsT250transparent sleeve Out+
316-0360503-001 BLKWire #16 UL1015 both ends T187 transparent sleeve L:140mm
316-0360503-001 WHT Wire #16 UL1015 both ends T187 transparent sleeve L:140mm
12
SW-10

SW-10 230V Electrical parts list
Part number Description Reference Designator
Resistors
020-000498-120 Carbon Film 0R 1/4W J R10,11
021-100401-120 MOF Resistor 1K 1W J KINK MO-100 R103
021-820303-020 MOF Resistor 820R 3WS J 8x20 R6,9
022-500003-020 KNP Resistor 0R05 3WS J FK TYPE R104
024-100298-120 SMD Resistor 10R 1/8W J 0805 R81,82
024-100398-120 SMD Resistor 100R 1/8W J 0805 R62
024-100498-120 SMD Resistor 1K 1/8W J 0805 65,79,83,92,95,96,105,108
024-100598-100 SMD Resistor 10K 1/8W F 0805 R20,21
024-100598-120 SMD Resistor 10K 1/8W J 0805 R2,37,54,58,63,69,71,72,74,
024-100698-100 SMD Resistor 100K 1/8W F 0805 R22-25
024-100698-120 SMD Resistor 100K 1/8W J 0805 R3,112
024-100898-120 SMD Resistor 10M 1/8W J 0805 R121
024-110598-100 SMD Resistor 11K 1/8W F 0805 R98
024-113598-100 SMD Resistor 11K3 1/8W F 0805 R34
024-120498-120 SMD Resistor 1K2 1/8W J 0805 R51,53
024-130498-100 SMD Resistor 1K3 1/8W F 0805 R35,110
024-137598-120 SMD Resistor 13K7 1/8W F 0805 R42,43
024-137698-100 SMD Resistor 137K 1/8W F 0805 R32
024-150498-120 SMD Resistor 1K5 1/8W J 0805 R67,68,12-15
024-150598-120 SMD Resistor 15K 1/8W J 0805 R29
024-200598-120 SMD Resistor 20K 1/8W J 0805 R94
024-220398-120 SMD Resistor 220R 1/8W J 0805 R90
024-220498-121 SMD Resistor 2K2 1/8W J 0805 R1,87,61
024-220598-120 SMD Resistor 22K 1/8W J 0805 R50,52,118
024-220798-120 SMD Resistor 2M2 1/8W J 0805 R80
024-237598-120 SMD Resistor 23K7 1/8W F 0805 R48
024-237698-100 SMD Resistor 237K 1/8W F 0805 R45
024-243698-100 SMD Resistor 243K 1/8W F 0805 R36
024-270498-120 SMD Resistor 2K7 1/8W J 0805 R64,73
024-300398-120 SMD Resistor 300R 1/8W J 0805 R55
024-300598-120 SMD Resistor 30K 1/8W J 0805 R56
024-330498-120 SMD Resistor 3K3 1/8W J 0805 R7,8,59
024-330598-120 SMD Resistor 33K 1/8W J 0805 R5,122
024-332498-100 SMD Resistor 3K32 1/8W F 0805 R26,27
024-360498-120 SMD Resistor 3K6 1/8W J 0805 R28
024-390498-120 SMD Resistor 3K9 1/8W J 0805 R93
024-390598-120 SMD Resistor 39K 1/8W J 0805 R77
024-430498-100 SMD Resistor 4K3 1/8W F 0805 R78
024-430598-120 SMD Resistor 43K 1/8W J 0805 R4
024-453598-100 SMD Resistor 45K3 1/8W F 0805 R30
024-470298-120 SMD Resistor 47R 1/8W J 0805 R101,102
024-470398-120 SMD Resistor 470R 1/8W J 0805 R76,99,100
024-470498-120 SMD Resistor 4K7 1/8W J 0805 R85,86
024-470598-120 SMD Resistor 47K 1/8W J 0805 R44,47,49,107
024-470698-120 SMD Resistor 470K 1/8W J 0805 R70
024-470798-120 SMD Resistor 4M7 1/8W J 0805 R60
024-560498-120 SMD Resistor 5K6 1/8W J 0805 R40,41
024-604598-100 SMD Resistor 60K4 1/8W F 0805 R39
024-620398-120 SMD Resistor 620R 1/8W J 0805 R16,18,57
13
SW-10

Part number Description Reference Designator
024-680498-120 SMD Resistor 6K8 1/8W J 0805 R46,91
024-680598-120 SMD Resistor 68K 1/8W J 0805 R31,33,66
024-909498-100 SMD Resistor 9K09 1/8W F 0805 R38
025-010300-000 Thermister TSE-103 K L:50mm TH1
026-200595-269 VR PN:RD163121R03D-20KBx2(EJ) VR2
026-500495-252 VR 5KA PN:RK163111R52B-5KA (EJ) VR1
Capacitors
031-100244-100 SMD Ceramic Capacitor 0u01/50V K 0805 X7R C5,10,33,45,51,66,67
031-100343-100 SMD Capacitor 100pF/50V J 0805 NPO C16,36,58
031-100344-100 SMD Capacitor 0u1/50V K 0805 X7R C11,42-44,46-49,52,54,55,60,63,71,74,77
031-100384-100R SMD Capacitor 0u1/250V K 1206 X7R C3,7
031-150244-100 SMD Capacitor 0u0015/50V K 0805 X7R C32
031-220344-100 SMD Capacitor 220pF/50V J 0805 NPO C14,15,20,21,19
031-330444-300 SMD Capacitor 3300pF/50V K 0805 X7R C40,34
031-470244-102 SMD Capacitor 0u047/50V K 0805 X7R C62,59
031-560243-100 SMD Capacitor 56pF/50V J 0805 NPO C57,61
031-560343-102 SMD Capacitor 560pF/50V J 0805 NPO C56
032-100464-202 END Mylar Capacitor 1uF/100V K P:10 C70,70B
033-200645-300 NP Capacitor 200u/50V M (R)1321 P:5 C17,18
033-470444-270 NPE Capacitor 4u7/50V K10 (R)8x13 SBE C73
033-680464-270 NPE Capacitor 6u8/100V K10 (R)1020 GNE C72
034-100525-300 Electrolytic Capacitor 10uF/25V M (R)0511 P:5 C35
034-100625-300 Electrolytic Capacitor 100uF/25V M (R)6.3x11 P:5 C64
034-220525-301 Electrolytic Capacitor 22uF/25V M (R)5x11 P:5 C39,50,53,41,4,9
034-330525-300 Electrolytic Capacitor 33uF/25V M (R)0511 P:5 C1
034-330615-300 Electrolytic Capacitor 330uF/16V M (R)0812 P:5 C12,78
034-470415-301 Electrolytic Capacitor 4u7/50V M (R)0511 P:5 C2
034-470515-200 Electrolytic Capacitor 47uF/16V M (R)0511 P:2.5 C37
034-470615-301 Electrolytic Capacitor 470uF/16V M (R)0812 P:5 C65
034-470745-200 Electrolytic Capacitor 4700uF/50V M (R)2236 C6,8
038-100363-300 MPE Capacitor 0u1/100V J C68,69,27
038-220393-300 MPE Capacitor 0u22/63V J C25-26,29,31
038-330393-300 MPE Capacitor 0u33/63V J C22,23,24
038-470293-300 MPE Capacitor 0u047/63V J C28,30
039-100384-100 Safety Capacitor PN:HQX0.1K275VACx2 18x6x12mm CXAC1
Semiconductors
050-505200-001 LED PN:LT-2402-21
051-000600-100 NPN Transistor PN:MPSW06RLRA TO-92 (ON) Q2,Q16
051-003100-000 NPN Transistor PN:TIP 31C TO-220 (MOSPEC) Q4
051-005600-100 PNP Transistor PN:MPSW56RLRA TO-92 (ON) Q3
051-222200-100 NPN Transistor PN:MPS2222ARLRA TO-92 Q21
051-290700-100 PNP Transistor PN:MPS2907A RLRA TO-92 Q19,23
051-540101-000 PNP Transistor PN:2N5401 TO-92 Q1
051-555100-000 NPN Transistor PN:2N5551 TO-92 Q17
051-640001-000 Mosfet N-Channel PN:IRF640N TO-220 (IR) Q18,22
052-400080-000 Bridge Regulator PN:RS804 400V,8A BR1
053-211100-000 IC;DIP, HALF-BRIDGE DRIVE
R
PN:IR2111 8PIN (IR) U7
054-000100-100 SMD Diode PN:ES1D 200V 1A D5,26,29,33,38
054-001002-100 SMD Zener Diode PN:BZX84C10 10V SOT-23 D35
14
SW-10

Part number Description Reference Designator
054-001501-100 SMD Zener Diode PN:BZX84C15 15V SOT-23 D6,7,9
054-007200-100 SMD IC DUAL OP-AMP PN:TL072CDR SO-8 (TI) U5,6
054-007400-100 SMD IC;(OP) QUAD OP-AMP PN:TL074CDR (TI) U2,3
054-011400-100 SMD Transistor PNP PN:DTC114TKA SMT3 (ROHM Q7
054-033904-100 SMD Transistor NPN PN:MMBT3904LT1 SOT23 (ON Q11,14,13,5,8,9
054-033906-100 SMD Transistor PNP PN:MMBT3906LT1 SOT23 (ON Q6,10,12,15
054-045580-100 SMD IC;(OP) DUAL OP-AMP PN:NJM4558M-TE3 DMP-8 U4
054-050601-100 SMD Zener Diode PN:BZX84C5V6 5.6V SOT-23 TAPIN D24,36,37
054-414803-100 SMD DIODE PN:LL4148 (Wishay) D1-4,8,10-23,27,30-31,34,39
054-540100-100 SMD Transistor (PNP) PN:MMBT5401 LT1 SOT-23 Q20,24,26
054-555100-100 SMD Transistor (NPN) PN:MMBT5551 LT1 (ON) Q25
Miscellaneous
041-115001-000 Bead Coil YT-10911 L5
042-017608-000 Power Transformer YT-10867 75W4Ω(230V/50Hz)EI76 PT1
043-300101-000 Inductor PN:YT-10033 30uH L2
043-324300-000 Inductor 324uH YT-10778 L4
043-560200-000 Inductor 56uH YT-10779 L1
043-700101-000 Toroidal Inductor 70uH YT-10682 L3
044-100100-000 SMD Ferrite Bead PN:321611 600R/100MHz 1206 FB1,FB2
061-020000-000 Knob φ20x15m/m UL94V-0 BLK
061-314002-000 Strain Relief P/N SB4F-2
061-400014-000 Rubber Foot ID:6.2 OD:11.5 t=2mm BLK
061-700044-000 Mycar 13x18mm TO-220
063-010012-000 Bracket for Power Transistor P/N:TRK-1
063-321101-000 Plate 322x105.7x15mm BLK ABS-94V0
063-531808-000 Bucket 322x105.7x146.5mm BLK (94VO)
071-100608-100 Fiber Washer OD=8mm ID=3.2 t=1 (red)
071-100851-000 Washer ID=5.1 OD=12 t=1m/m
072-010007-000 RCA Jack SCJ-1020 2P(G) WHT,RED
072-040039-000 Terminal PC205 (t=0.8m/m) T205MA S-
072-040064-000 Terminal PC250(t=0.8),T250MA S+
072-040096-000 Terminal (t=0.8mm) PC187(0.8) AC1,AC3,T1,T2,AC2,SW2,SW4
072-040169-000 Connector 2 PIN JS-1001-2 P:2.5mm CONN3A
072-060170-000 B.P. W / Accesory Parts BP/IP,BP/OP
072-060213-000 B.P. PN:A414B-3A RCA JAM BLK
072-060214-000 B.P. PN:A414R-3A RCA JAM RED
073-032316-601 Black Anodized 70x42x20mm
073-050001-000 Fuse Clip P/N:CFFH1206
074-020018-000 Rocker SW (Power) PN:RF1003-BB4-0
074-030002-000 Toggle SW PN:L101-T2B4QE SW5,SW6
074-300018-000 Relay PN:943-1C-48D K1
082-022607-000 Wire Set #26 UL1007 L=74mm blk/wht 2P HOUSING
086-021818-030 VDE Europen Wire Set LF2-75 2PIN blk T187F
091-000202-000 FUSE;VBS UTE 0.8A/250V 5x20mm F1
181-911600-000 Wire Set #16AWG UL1007 Black 480mm T205
181-911655-000 Wire Set #16AWG UL1007 Green 480mm T250
181-981800-104 BLKWire #18 UL1617 T187+ L:140mm
181-981899-101 WHT Wire #18 UL1617 T187+ L:160mm
008-000200-150 Fuse 21x5mm
008-061215-000 Gasket C4305 12x15 t=5mm CR
008-062002-002 Gasket PN:L-32 200x20mm t=5mm PORON
15
SW-10

Part number Description Reference Designator
008-062002-012 Gasket 200x20mm t=2mm CR4305
008-063208-000 Gasket 321x8 t=1mm CR
008-069304-000 Gasket 93x4 t=1mm CR
16
SW-10

17
SW-10

18
SW-10

19
SW-10