
2023 01 03 2
Anpassa teaken eer förens form. / Customize the teak aer the bow shape.
Täta med Sikaflex vid infäst-
ningarna mot skrovet.Use
Sikaflex on the fittings.
Stålramen kan justeras
i bredd vid behov. Lossa
fästbultar innan och fäst
sedan igen.
The steel frame may be
adjusted in width, if
necessary. Loosen
mounting bolts first
then secure again.
Montera plattjärnet på undersidan av teaken.
Fit the plate on the bottom of the teak.
21
+/- 50 mm
Without anchor holder system
utan ankarsystem
With single bow roller / med ankarrulle
Använd valfria hål för fäste av code-0
Use any holes for mounting of code-0
Använd hål 5+6 eller 6+7 för fäste av code-0
Use any hole 5+6 or 6+7 for mounting of code-0
Alt Alt
17 1715 15
1 1
552 6 76 73 41
Montering av fäste för gennaker och Code-0 / Mounting of brackets for gennaker and Code-0
Stag och Code-0 fäste MÅSTE monteras vid samma punkt / Strut and Code-0 attachment MUST be mounted at the same point
22