Baumatic BR105 User manual

33U d
BR105, 142 Litres
Built-under
larder fridge

USER MANUAL FOR YOUR BAUMATIC
BR105, 142 Litres
Built-under
larder fridge
2
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference. for
you or any person not familiar with the operation of the appliance.
JW 11/01/13

3
Contents
Environmentalnote 4
Important safety information 5 – 6
Specifications of your larder fridge 7 – 10
Dimensions 7
Description of the appliance 8
Description of the product features 9 - 10
Using your Baumatic larder fridge 10 - 12
Beforeswitchingon 10
During first use 10 - 11
Switching on the appliance and setting the thermostat 11 - 12
Arranging and storing food in your refrigerator 12 – 13
Saving energy when using your refrigerator 13 - 14
Cleaning and maintenance 14 - 16
Thedefrostdrainhole 15
Replacing the light bulb 16
Installation 16 - 26
Electricalconnection 17
Positioning 18
Reversing the door of your appliance 18 - 20
Aperturedimensions 21
Adjusting the plinth/kickboard 21 – 22
Fitting the furniture door to the appliance 22 - 26
Troubleshooting 26 – 28
Baumatic consumables 29
Technicaldata 30
Contactdetails 31

Environmental note
Note : Before discarding an old appliance, switch off and
disconnect it from the power supply. Cut off and render any plug
useless. Cut the cable off directly behind the appliance to prevent
misuse. This should be undertaken by a competent person. Disable
the door lock to make sure that children cannot get stuck inside
the appliance.
4

Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact Customer Care.
IMPORTANT: Any installation work must be carried
out by a qualified electrician or competent person.
Use of the appliance
oYour appliance is only designed to be used in the
home. It is suitable for storing food that needs to
be chilled and refrigerated. If it is used for any
other purpose or it is not used correctly, then
Baumatic Ltd. will accept no liability for any
damage that might be caused.
oAltering the specification of the appliance must not be attempted
for reasons of safety.
Before using your appliance
oCheck the appliance for any signs of transport damage. If you
notice any damage, then you should not connect your appliance
to your mains supply and should contact your supplier.
Refrigerant
oYour appliance contains R600a refrigerant, which is a natural gas
that does not contain CFCs that can damage the environment.
However it is a flammable substance, therefore care should be
taken:
During the transportation and installation of the
appliance, make sure that the refrigeration pipework
does not get damaged.
If it does become damaged then sources of ignition
and open flames should be avoided. Also the room
that the appliance is situated in should be thoroughly
ventilated.
oDo not place any objects on top of the appliance,
as this may damage the table top.
5

Child safety
oPackaging material should be kept away from
children.
6
oChildren should not be allowed to touch the
controls or play with the appliance.
General safety
oDo not pull on the power supply cable to remove the plug from
your mains supply socket.
oDo not pull out or insert the plug with wet hands.
oDo not attempt to use your appliance outdoors or any
place where it is likely to come into contact with the
elements.
oBefore cleaning the appliance or performing maintenance work,
ensure that the appliance has been disconnected from your
mains supply.
oNever allow the back coils of the appliance to come into contact
with the wall surface.
oAlways ensure that the location where you are installing your
appliance is free of stored items such as papers and other
flammable materials.
oNever block the ventilation openings of the appliance, either on
the inside or its exterior.
oIt is vital to keep your appliance well ventilated, so
that there is proper air flow between the bottom of
the unit and the plinth/kick plate which it is sitting on.
oDo not place electrical devices inside of the appliance, such as
mixers and electric ice cream makers.
Service
You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department.

Specifications of your larder fridge
Dimensions of appliance Dimensions of aperture*
Height: 818 - 870 mm Height: 820 – 870 mm
Width: 596 mm Width: 600 mm
Depth: 550 mm Depth: 600 mm (min)
oAutomatic fridge defrost
oAdjustable thermostat
o3 Safety glass shelves
o2 Salad crispers
oBottle rack
oEgg rack
oReversible door
oDoor on door fittings
oAdjustable feet
Cubic capacities
oGross capacity: 142 litres
oNet capacity: 140 litres
Energy efficiency class
Energy class: A+
7

IMPORTANT: When you install your appliance it is important to bear
in mind its climatic rating.
In order to find out the climatic rating of your appliance, you should
check the rating plate. The rating plate is located on the front left edge
of the inside of the fridge. You will need to open the door of your
appliance to be able to find it.
The rating plate will indicate the ambient temperature range that your
appliance will function correctly within.
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Description of the appliance
NOTE:
Image is for reference only and may differ from your product.
8

Description of the product features
1) Shelves
oThe shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
oTo remove a shelf: Take off all of the items that are stored on the
shelf that you want to remove. Then lift the front of the shelf and
carefully pull it out of the grooves.
2) Defrost water outlet
oThe interior of the refrigerator is cooled by
the cooling plate that is on the rear wall.
Beneath this there is a channel and an
outlet for the defrost water.
oIt is important that this channel never becomes clogged (see “The
defrost drain hole” section for a detailed explanation of how to keep
the channel clear).
3) Crisper (salad) drawers and cover
oThe crisper drawers are in the bottom of your refrigerator and there
is a cover that goes over them.
oThe cover helps to prevent fruit and vegetables from drying out
prematurely.
4) Dairy shelf (door rack)
oThe dairy shelf is suitable for storing eggs, cheese and yogurt. As
well as smaller packages, tubes, cans etc.
5) Bottle shelf (bottle door rack)
oThe lower shelf should be used for storing reasonably sized bottles.
IMPORTANT: IT IS IMPORTANT THAT NONE OF THE SHELVES
THAT SIT IN THE DOOR ARE OVERLOADED, AS THIS WILL
DRASTICALLY REDUCE THEIR WORKING LIFE.
9

Using your Baumatic larder fridge
Before switching on
oMake sure that it has been installed by a suitably qualified person,
as per the information contained in Baumatic’s installation
instructions.
oAfter delivery, wait for eight hours before connecting the appliance
to your mains supply. This will allow any refrigerant gasses that
may have been disturbed during the transportation process to
settle.
oThe outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
oThe interior of the appliance should be cleaned with
a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories should
be thoroughly dried, after the cleaning process has
been completed.
oThere can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
oYou should set the thermostat dial to its maximum setting for 24
hours after switching on the appliance for the first time.
oWhen you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge freezer
reaches a cool enough temperature.
oDuring this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
oYou should then adjust the thermostat dial down to its normal
operating position.
oIf the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
10