Bausman & Company 3816 User manual

3816 Perimeter Extensions Instructions
Pull out leaf support and locate the ones with dowel cutouts. Find the leaf extension with two
dowels protruding at the bottom. It should have two tongues at either end.
Securely place the leaf extension over the
leaf support and align both dowels with the
cutout.
1425 S Campus Ave, Ontario, CA 91761 •Phone: [phone] •Fax: [phone] •bausman.net

Locate one of the six leaf extensions with a groove on one side and a
tongue at the other side. Set it over the leaf support so that the groove of
this leaf is adjacent to the tongue of the previous leaf.
Slide the leaf extension securely with the previous leaf, making sure the groove and the
tongue are tight. Use the table leaf fastener to connect the two leaves together.
1425 S Campus Ave, Ontario, CA 91761 •Phone: [phone] •Fax: [phone] •bausman.net

Repeat the previous step until the remaining
five leaves with a groove and tongue are
securely attach with the main table.
The remaining leaf should have grooves on both sides. Slide it so that the grooves fit tightly with
the tongues in the other leaves as shown.
Lastly, secure the last leaf with table leaf fastener at both corners.
1425 S Campus Ave, Ontario, CA 91761 •Phone: [phone] •Fax: [phone] •bausman.net