Baxton Studio Hubbard MAG-10-Natural/Black/White User manual

1
2
1
2
33
2
12
6
4
5
7
8
9
10
11
12
13
14×4
6
L
D
O
E
FP
P
G
L
L
A
B
C
D
12PCS
12PCS
12PCS
1 PC
E
F
G
H
I
J
1 PC
2 PCS
2 PCS
1 PC
2 PCS
8 PCS
O
K
L
M
1 PCS
12PCS
4 PCS
N
O
P
20PCS
2 PCS
2 PCS
LD RD CRCL
K
CL
K
CR
Attach the runners K to pieces 2 and 3 as shown. Use screws (L).
On piece 6, attach the door handles (D) using screws (E), attach bar
hinges (O). On piece 12, attach the door handles (G) using screws (F)
& washer (P).

A
B
B
A
A
A
C
C
2
4
3
3
3
5
8
7
1
6
2
1
A
A
C
C
J
J
J
J
A
A
C
C
B
H
I
B
B
B
B
B
3 4
5 6
On piece 1, secure the catch (H) using screws (I). Use the pre-drilled
holes for guidance.
Attach piece 2 & 3 to piece 4 using wooden dowels (C), cam dowels (A)
and cam locks (B).
Slot piece 7 into the ridges. Add piece 1 to the unit using wooden
dowels (C), cam dowels (A) and cam locks (B). Connect door 6 using
bar hinges (O).
Slot piece 8 into the ridges. Add piece 5 to the unit using wooden
dowels (C), screw (J).

M
A
A
B
B
M
MM
N
N
N
N14
5
9
10
10 13
11
12
5
10
J
J
78
9
Attach metal plate (M) to piece 5 using screws (N). Tighten the leg (14) clockwise direction.
Attach pieces 9, 10 & 11using screws (J). Make sure that the built-in
ridge is facing inwards and at the bottom.
Slot piece 13 into the ridges. First insert the cam locks (B) into the
pre-drilled holes on parts 10 & 11. Then insert cam dowels(A) into
each side, you then need to line up these screws with the pre-drilled
holes on the front piece (12). Once attached, tighten the cam locks (B)
using a cross-head screwdriver and ensure the piece is secure.

K
L
L
13
12
11
13
12
DR
K
DL
The unit should now be assembled and ready to use.
Turn the drawer upside down. Line up the holes on the outside pieces
with the holes on the runners (KDR & KDL), secure to the drawer using
screws (L).
Turn the unit the right way up and insert the drawers.